This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of the Structure of Diesel Sprays Using 2-D Imaging Techniques
Annotation ability available
Sector:
Language:
English
Abstract
The structure of dense sprays was investigated using 2-D imaging techniques. To investigate the mechanism of atomization, the liquid phase in a non-evaporating spray was visualized by a thin laser sheet formed by a single pulse from a Nd:YAG laser at the distance from 4 to 19 mm from the nozzle orifice with the injection pressure and the surrounding gas density as parameters.
A new technique for the visualization of vapor phase in an evaporating spray, the SSI (Silicone particle Scattering Imaging) method, was proposed to investigate the structure of the vapor phase regions of the spray.
Recommended Content
Authors
Citation
Kosaka, H., Won, Y., and Kamimoto, T., "A Study of the Structure of Diesel Sprays Using 2-D Imaging Techniques," SAE Technical Paper 920107, 1992, https://doi.org/10.4271/920107.Also In
References
- Schweitzer, P. H. “Mechanism of Disintegration of Liquid Jets” J. Applied Physics 8 513 1937
- Bergwerk, W. “Flow Pattern in Diesel Nozzle Spray Holes” Proc. Instn. Mech. Engrs. 173 6551 1959
- Reitz, R. D. Bracco. F. V. “On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions” SAE paper, No. 790494 1979
- Reitz, R. D. Bracco, F. V. “Mechanism of Atomization of a Liquid Jet” Phys. Fluids 25 10 1730 1982
- Wu, K. -J. Su, C.-C- Steinberger, R. L. Santavicca, D. A. Bracco. F. V. “Measurements of the Spray Angle of Atomizing Jets” Trans. of ASME 105 406 1983
- Ruiz, F. Chigier, N. “The Effects of Design and Operating Conditions of Fuel Injectors on Flow and Atomization” SAE paper, No. 870100 1987
- Chehroudi. B. Chen, S.-H. Bracco, F. V. Onuma, Y. “On the Intact Core of Full-Cone Sprays” SAE paper, No. 850126 1985
- Arai, M. Shimizu, M. Hiroyasu, H. “Break-up Length and Spray Formation Mechanism of a High Speed Liquid Jet” Proc. of the 4th International Conference on Liquid Atomization and Spray Systems (ICLASS-88) Sendai, Japan 177 1988
- Arai, M. Kishi, T. Hiroyasu, H. “A Laser Diagnostic Technique for Sauter Mean Diameter of Fuel Oil Sprays” Proc. of the 2nd International Conference on Liquid Atomization and Spray Systems (ICLASS-82) Madison, Wisconsin, USA 309 1982
- Tabata, M. Arai, M. Hiroyasu, H. “Sauter Mean Diameter of a Diesel Spray Injected into an Environment of High Pressure” Trans. JSME 55 518 3239 11,389
- Kamimoto, T. Yokota, H. Kobayashi, H. “A New Technique for the Measurement of Sauter Mean Diameter of Droplets in Unsteady Dense Sprays” SAE paper, No. 890316 1989
- Reitz, R. D. Diwakar, R. “Structure of High-Pressure Fuel Sprays” SAE paper, No. 870598 1987
- O'Rourke, P. J. Amsden, A. A. “The Tab Method for Numerical Calculation of Spray Droplet Breakup” SAE paper, No. 872089 1987
- Cavaliere, A. Ragucci, R. D'Alessio, A. Noviello, C. Cardamone, P. “Morphological Analysis of Diesel Sprays Structures in Ignition Regimes” Proc. of Workshop and Exposition on Fluid Mechanics, Combustion and Emission in Reciprocating Engines Napoli, Italy 89 1990
- Ragucci, R. Cavaliere, A. D'Alessio, A. “Laser Assisted Diagnostics for Characterization of Condensed Phase during Diesel Combustion Processes” Proc. of International Symposium on Diagnostics and Modelling of Combustion in Reciprocating Engines (COMODIA-90) Kyoto, Japan 371 1990
- Azetsu, A. Dodo, S. Someya, T. Oikawa, C. “A Study on the Structure of Diesel Spray (2-D Visualization of the Non-Evaporating Spray)” Proc. of International Symposium on Diagnostics and Modelling of Combustion in Reciprocating Engines (COMODIA-90) Kyoto, Japan 199 1990
- Melton, L. A. “Spectrally Separated Fluorescence Emissions for Diesel Fuel Droplets and Vapor” Applied Optics 22 14 2224 1983
- Melton, L. A. “Vapor/Liquid Visualization in Fuel Sprays” Proc. of 20th Symposium (International) on Combustion The Combustion Institute 1283 1984
- Bardsley, M. E. A. Felton, P. G. Bracco, F. V. “2-D Visualization of Liquid and Vapor Fuel in an I.C. Engine” SAE paper, No. 880521 1988
- Kamimoto, T. Kobayashi, H. Matsuoka, S. “A Big Size Rapid Compression Machine for Fundamental Studies of Diesel Combustion” SAE paper, No. 811004 1981
- Kamimoto, T. Yokota, H. Kobayashi. H. “Effect of High Pressure Injection on Soot Formation Process in a Rapid Compression Machine to Simulate Diesel Flames” SAE paper. No. 871610 1987
- Hjelmfelt, A. T. Mockros, L. F. “Motion of Discrete Particles in a Turbulent Fluid” Appl. Sci. Res. 16 149 1966
- Yokota. H. “A Study on Transient Dense Sprays and Flames by Image Processing Technique” Dept. of Mech. Engnrg., Tokyo Institute of Thech. 1991
- Ito, I. “A Study of Spray Jet Injected by a Single Hole Nozzle” Trans. JSME 36 285 759 1970
- Crowe, C. T. Chung, J.-N. Troutt, T. R. “Particle Mixing in Free Shear Flows” Prog. Energy Combust. Sci. 14 171 1989