This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Simulation Model for a Methanol Fueled Turbocharged Multi-Cylinder Automotive Spark Ignition Engine
Annotation ability available
Sector:
Language:
English
Abstract
The development of a computer simulation model for an automotive turbocharged multi cylinder spark ignition engine for gasoline and methanol operations is described in this paper. The model illustrates the simulation of the thermodynamic cycle comprising of compression, combustion, expansion, exhaust and intake processes. The scheme employed for matching the turbocharger and engine is also highlighted. The computed data of the above model is validated with the available experimental data. The model predicts the brake power developed by the engine, brake specific energy consumption, the nitrogen oxide and carbon monoxide emissions for both the gasoline and methanol operations, corresponding to the original and improved manifold design configurations. The overall analysis of the results show an increase in power output, lower nitrogen oxide and carbon monoxide emissions and improved brake specific energy consumption for the methanol fueled engine as compared to the gasoline version for both the original and modified engine designs operating on naturally aspirated and turbocharged conditions.
Recommended Content
Technical Paper | A Thermodynamic Simulation Model for a Methanol Fueled Spark Ignition Engine |
Technical Paper | Superheated Sprays of Alternative Fuels for Direct Injection Engines |
Authors
Topic
Citation
Mohanan, P. and Gajendra Babu, M., "A Simulation Model for a Methanol Fueled Turbocharged Multi-Cylinder Automotive Spark Ignition Engine," SAE Technical Paper 912417, 1991, https://doi.org/10.4271/912417.Also In
References
- Gajendra Babu, M.K “Computer Modelling of Internal Combustion Engines” Proceedings XI National Systems Conference Allahabad Dec 1985
- Freeman, P.F Walsham, B.E “A guide to some Analytical Turbocharger Matching Techniques” Proceedings of I.Mech.E. 1978
- Way, R.J.B Wallace, F.J “Results of Matching Calculations for Turbocharged and Compound Engines with Reduced Heat Loss” SAE paper 860329 1986
- Assanis, D.N Heywood, J.B “Development and use of Computer Simulation of the Turbocompounded Diesel System for Engine performance and Component Heat Transfer Studies” SAE paper 860329 1986
- Watson, N Janota, M.S “Turbocharging the Internal Combustion Engine” MacMillan Publishers Ltd 1982
- Watts, P.A Heywood, J.B “Simulation Studies of the Effects of Turbocharging and Reduced Heat Transfer on Spark Ignition Engine operation” SAE paper 800029 1980
- Gajendra Babu, M. K. “A preliminary Analysis of Matching a Turbocharger to the 1.3 litre OPEL Passenger car Engine including Cam Timing” Dept of Mechanical Engineering, University of Melbourne 1982
- Hong, C.W. Watson. N. “Turbocharged S.I.Engine Simulation under Steady and Transient Conditions” SAE paper 880122 1988
- “A Newsletter on Indo-U.S Scientific Co-operation and Technological Advances in America” United States Information Service New Delhi Jan 1990
- Gajendra Babu, M.K. Murthy, B.S “Simulation and Evaluation of a Four Stroke Single Cylinder Spark Ignition Engine” SAE paper 750687 1975
- Mathur, H.B Gajendra Babu, M.K Subba Reddi, K.S. “A Thermodynamic simulation Model for a Methanol fueled Spark Ignition Engine” SAE paper 830333 1983
- Woschni, G “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” SAE paper 670931 1967
- Bracco, F.V “Modelling and Diagnostics of Combustion in Spark Ignition Engines” COMODIA Tokyo Sept 1985
- Ramos, J.I “Internal Combustion Engine Modelling” Hemisphere Publishing Corporation 1989
- Shapiro, A.H “The Dynamics and Thermodynamics of Compressible FluidFlow” Ronald Press 1953
- Benson R.S Garg R.D Woollatt D “A numerical Solution of Unsteady Flow Problems” International Journal of Mechanical Sciences 6 1964
- Gajendra Babu M.K Murthy B.S “Simulation and Evaluation of Exhaust and Intake Systems of a Four Stroke Spark Ignition Engine” SAE paper 760763 1976
- Lakshminarayanan P.A Janakiraman P.A Gajendra Babu, M.K Murthy, B.S “A Finite Difference scheme for Unsteady Pipe Flows” International Journal of Mechanical Sciences 21 1979
- Lakshminarayanan P.A Janakiraman P.A Gajendra Babu M.K Murthy B.S “Prediction of Gas Exchange Process in a Single CylinderInternal Combustion Engine” SAE paper 790359 1979
- Benson R.S Baruah P.C “Performance and Emission Predictions for a Multicylinder Spark Ignition Engine” Proc I.Mech.E 191 1977
- Benson R.S “The Thermodynamics and Gas Dynamics of Internal Combustion Engines” 1 Clarendon Press Oxford 1982
- Zinner K “Supercharging of Internal Combustion Engines” Springer-Verlag 1978
- Mohanan P. “Studies on the Turbo-Charging of a Methanol Fueled Automotive Spark Ignition Engine,” Indian Institute of Technology, Delhi June 1990
- Watson H.C “Unpublished notes on Turbocharging of OPEL 1.3 litre Four Cylinder Automotive Engine” Dept of Mechanical Engineering, University of Melbourne 1982
- Clark J.S Owen B.P “Turbocharging the 1.3 litre Metro Car” Proc I.Mech E Conference on Turbocharging and Turbochargers London April 1982