This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Diesel Deposit Forming Tendencies - Microanalysis Methods
Annotation ability available
Sector:
Language:
English
Abstract
Deposit forming tendencies of diesel lubricants are normally conducted using full scale engine tests. The use of bench tests to evaluate diesel lubricant deposit forming tendencies and two microanalysis methods, the “Two-Peak” pressurized DSC method developed at National Institute of Standards and Technology and the Penn State Thin Film Microoxidation test, are described in detail. Correlation of the two laboratory bench tests using conventional diesel lubricants and reference fluids are reported. Both methods can be utilized to evaluate diesel lubricants. The advantage of using the “Two-Peak Method” to developing high temperature liquid lubricants is demonstrated.
Recommended Content
Technical Paper | Piston Friction Force And Piston Ring Oil Film Thickness |
Technical Paper | A Study on the Tribological Performance of an Organic Cadmium Compound as a Lubricant Additive |
Technical Paper | Engine Oils and Engine Durability |
Authors
Topic
Citation
Perez, J., Pei, P., Zhang, Y., and Hsu, S., "Diesel Deposit Forming Tendencies - Microanalysis Methods," SAE Technical Paper 910750, 1991, https://doi.org/10.4271/910750.Also In
References
- U.S. DOE “Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop,” July 27-30 Castine, ME
- Proceedings of the Twenty-sixth Automotive Technology Development Contractor's Coordination Meeting SAE Publ. P-219 Dearborn, MI October 1988
- Signor, M. Steinke, R.E. “Future Trends In Diesel Engine Design and Their Impact on Lubricants,” SAE Paper No. 871271 Toronto, Canada 1987
- Richards, R. R. Sibley, J.E. “Diesel Engine Emissions Control for the 1990's,” SAE Paper No. 880346 Detroit, MI 1988
- PT-28 “The Adiabatic Engine: Past, Present and Future Developments,” Soc. of Auto. Engrs. 400 Commonwealth Drive Warrendale, PA 15096 1984
- Hsu, S.M. Cummins, A.L. Clark, D.B. “Evaluation of Automotive Crankcase Lubricants by Differential Scanning Calorimetry,” SAE Paper No. 821252 1982
- Perez, J.M. Kelly, F.A. Klaus, E.E. Bogrodian, V. “Development and Use of The PSU Microoxidation Test for Diesel Engine Oils,” SAE Paper No. 872028 Toronto, Canada 1987
- Michael M. Schmidt, G.M. Olsen, M.T. “Diesel Oil Thickening Due to the Oxidation,” SAE Paper No. 880261 Detroit, MI 1988
- Naidu, S.K. Klaus, E. E. Duda, L.J. “Kinetic Model for High Temperature Oxidation of Lubricants,” Ind. Eng Chem. Prod. Res. Dev. 1986 25 596 603
- Clark, D.B. Klaus, E.E. Hsu, S.M. “The Role of Iron and Copper in the Oxidation Degradation or Lubricating Oils,” Lubr. Engrg 41 5 280 287 1984
- Coran, A.Y. Vineyard, B.D. “Gasoline Engine Deposition: Sludge Binder,” ACS Div. of Petroleum Symposium Sept. 1969 New York
- Dimitroff, E. Quillian, R.D. “Low Temperature Engine Sludge, What? Where? and How?” Paper 951A, International Automotive Engine Congress Detroit, MI Jan. 1965
- Kreutz, K.L. Love, R.F. “Role of Fuel Sulfur in Deposit Formation and Lubricant Degradation in Diesel Operation,” ACS Div. of Petroleum Symposium Sept. 1969 New York
- Siegl, W.O. Zinbo, M. “On The Chemical Composition and Origin of Engine Deposits “ The Chemistry of Engine Combustion Deposits ,” Ebert L.B. Plenum Press 1985
- Ebert, L.B. Davis, W.H. Jr., Mills, D.R. Dennerlein, J.D. “The Chemistry of IC Engine Deposits,” Ebert L.B. Plenum Press 1985
- McGeehan, J.A. Fontana, B.J. “Effect of Soot on Piston Deposits and Crankcase Oils - Infrared Spectrometric Technique for Analyzing Soot,” SAE Paper No. 801368 1980
- Papke, B.L. Dahlstrom, P.L. Kreuz, K.L. “Surface Characterization of Model Lubricant-Derived Diesel Engine Piston Deposits,” STLE Preprint No. 89-AM-7D-1 Atlanta, GA May 1989
- Hsu, S.M. “Review of Laboratory Bench Tests in Assessing the Performance of Automotive Crankcase Oils,” Lubrication Engineering 37 12 722 731 December 1981
- SAE E-34 Propulsion Lubricants Committee Symposium on Deposits Oct. 1989 St. Louis, MO.
- Cho, L.F. Klaus, E.E. “Microoxidation Evaluation of Automotive Crankcase Oils,” SAE Paper No. 831679 San Francisco, CA 1983
- Zerla, F. Moore, R. “Thin Film Microoxidation Test for Diesel Engine Oils,” SAE Paper No. 890239 Detroit, MI 1989
- Perez, J.M. Pei, P. Zhang, Y. Hsu, S.M. “Development of a Method for the Characterization of Deposit Forming Tendencies of High Temperature Liquid Lubricants,” ACS, Div. of Petroleum Chemistry Symposium Boston, MA April 1990
- Zhang, Y. Perez, J.M. Pei, P. Hsu, S.M. “The Deposit Forming Tendencies of Diesel Engine Oils-Correlation Between the Two-Peak Method and Engine Tests,” STLE April 1991
- Hermcamp, R.D. “Premature Loss of Oil Consumption Control in a Heavy Duty Diesel Engine,” SAE Paper No. 831720 Detroit, MI 1989
- Passut, C. Aggarwal, R. “Development and Evaluation of High Performance Diesel Engine Oils,” SAE Paper No. 872032 Toronto, Canada 1987
- Ku, C.S. Hsu, S.M. “A Thin Film Oxygen Uptake Test for the Evaluation of Automotive Crankcase Lubricants,” Lubr. Engrg 40 2 75 1984
- Ku, C.S. Pei, P. Hsu, S.M. “A Modified Thin-Film Oxygen Uptake Test (TFOUT) for the Evaluation of Lubricant Stability in ASTM Sequence IIIE Test,” SAE Paper No. 902121 Tulsa, OK 1990
- Smolenski, D.J. Bergin, S.P. “Development of the ASTM Sequence IIIE Engine Oil Oxidation and Wear Test,” SAE Paper No. 881576 1988
- Zhang, Y. Pei, P. Perez, J.M. Hsu, S.M. “A New Method to Evaluate Deposit Forming Tendencies of Lubricants by Differential Scanning Calorimetry,” STLE April 1991
- Cvitkovic, E. Klaus, E.E. Lockwood, F. “A Thin-Film Test for the Measurement of the Oxidation and Evaporation of Ester-Type Lubricants,” ASLE Transactions 22 4 395 401 1978
- Klaus, E.E. Krishnamachar, V. Dang H. “Evaluation of Basestock and Formulated Lubes Using The Penn State Microoxidation Test,” NBS Spec. Publ., No. 584 Nov. 1980
- Klaus, E.E. Shah, P. Krishnamchar, V. “Development and Use of the Microoxidation Test With Crankcase Oils,” NBS Symposium on Recycled Oils Sept. 1982
- Naidu, S.K. Klaus, E.E. Duda, L.J. “Evaluation of Liquid Phase Oxidation Products of Ester and Mineral Oil Lubricants,” Ind. Eng. Chem. Prod. Res. Dev. 23 613 619 1984
- Walker, J.A. Tsang, W. “Characterization of Lubricating Oils by Differential Scanning Calorimetry,” SAE Paper No. 801383 1980
- Hsu, S.M. Lin, R.S. “Interactions of Additives and Lubricating Base Oils.” SAE Paper No. 831683 San Francisco, CA 1983
- Shellhause, H.U. Colwell, M.J. “Prediction of Long-Term Storage Stabilities of Fuels by Thermal Analysis (Pressure DSC),” SAE Paper No. 872145 Toronto, Canada 1987
- Barnes, J.R. Bell, J.C. “Laboratory Screening of Engine Lubricants for High Temperature Performance,” STLE Paper No. 88TC6C-1 Baltimore, MD Oct. 1988
- Sutor, P. Bryzik, W. “Development of Advanced High Temperature Lubricant,” SAE Paper No. 880015 Detroit, MI 1988
- Perez, J.M. Ku, C.S. Pei, P. Hegemann, B.E. Hsu, S.M. “Characterization of Tricresyl Phosphate Lubricating Films by Micro-Fourier Transform Infrared Spectroscopy” Tribology Trans. 33 1990 1 131 139