This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Evaluation of Multiplexing System for Automotive Distributed Control
Annotation ability available
Sector:
Language:
English
Abstract
On board multiplexing communication system is regarded as a necessary technology for the future of electronic system in automobiles. Many companies are developing multiplexing systems and the ISO and SAE are active in establishing standards for communication protocols. The proposed communication protocol specifications have different specifications. Consequently, no compatible evaluation standards existed, and it was difficult to compare one protocol to another.
Therefore, to assist the standardization activities of the IS0 and SAE, we have developed an evaluation method for distributed multiplexed communication systems and evaluated each of the proposed protocols using this method. These evaluations were performed from the point of view of the future users of these systems.
In this paper we present the results of the experiments on distributed multiplexed communication systems each of which consists of communication IC and the proposed physical layer. These evaluations were performed by the twelve corporate members of the JSAE serial data communication evaluation subcommittee.
Recommended Content
Technical Paper | Final Report on Evaluation of Multiplexing Systems for Automotive Distributed Control |
Aerospace Standard | Linear Token Passing Multiplex Data Bus |
Ground Vehicle Standard | Class B Data Communication Network Messages - Message Definitions for Three Byte Headers |
Authors
Citation
Fujiki, N., Isobe, T., Hiwa, N., Inoue, T. et al., "An Evaluation of Multiplexing System for Automotive Distributed Control," SAE Technical Paper 910718, 1991, https://doi.org/10.4271/910718.Also In
References
- SAE Proposed SAE Information Report, J1583 1986
- Phail F.H. et al In-Vehicle Networking - Serial Communication Requirements and Directions SAE Paper 860390 1986
- Kiencke U. et al Automotive Serial Controller Area Network SAE Paper 860391 1986
- Kiencke U. et al Application Specific Microcontroller for Multiplex Wiring SAE Paper 870515 1987
- Arnett D.J. A High Performance Solution for In-Vehicle Networking - ‘Controller Area Network (CAN)’ SAE Paper 870823 1987
- Kiencke U. et al The Impact of Bit Representation on Noise Emissions in Automotive Networks IEE Conference on Automotive Electronics 1987
- Philips CAN Specification 1987
- Kiencke U. et al Error Handling Strategies for Automotive Networks SAE Paper 880587 1988
- Phail F.H. Controller Area Network - An In-Vehicle Network Solution SAE Paper 880588 1988
- Intel Japan CAN Controller Area Network
- Zen S. CAN(Controller Area Network) JSAE “In-Vehicle Information and Control” Symposium 1988
- Intel 82526 Primer 1988
- Intel 82526 Controller Area Network Chip Architechtual Overview 1988
- Intel 82526 Controller Area Network Chip 1988
- Intel CAN 8052 Demo Board Manual 1988
- Peter C. et al Physical Layer for Vehicle Multiplex Networks SAE Paper 900694 1990
- Gupta S. CAN Facilitates In-Vehicle Networking SAE Paper 900695 1990
- Bosch CAN Specification of the Data Link Layer and Physical Layer IS0/TC22/SC3/WG1 Task Force ‘Low Speed’ N7 1990
- VOLKSWAGEN ABUS-IC phase 3 Specifications manual 8 June 1990
- VOLKSWAGEN ABUS-IC phase 3 Applications manual 8 June 1990
- VOLKSWAGEN ABUS Transceiver Specifications 8 June 1990
- Bosch Specification of the CAN-Physical Layer for Low-Speed-Application up to 125 Kbit/s Jan. 1990
- Philips PSCC-EVALUATI0N-BOARD Ver 1.1 User Manual Sep. 1989
- Philips Philips-Stand-alone-CAN-Controller Preliminary Functional Description Ver 1.0 Sep. 1989
- Philips Application of the PCA82C200 CAN- Controller Feb. 16 1990
- Philips PCA82C200 Stand-alone CAN-controller July 1990
- Philips Interfacing the CAN-Controller PCA200 with the Single-chip-Microcomputer SCC68070 April 20 1990
- Ford HOSTED BUS CONTROLLER CHIP USER'S GUIDE Version 1.5 1989
- SAE CLASS B DATA COMMUNICATION NETWORK INTERFACE DRAFT SAE J1850 DEC 89 DEVISION 2 20 90
- Mazda PALMNET Specifications
- Matsuda Y. et al Development of In-Vehicle Local Area Network Furukawa Denko Jiho No.84 1989
- Inoue T. et al Protocol for Automotive Local Area Network (PALMNET)-A Newly Developed In-Vehicle Communication System Based on SAE J1850 SAE Paper 890535 1989
- Delco Electronics CLASS2 APPLICATION HANDBOOK Nov. 7 1989
- Delco Electronics CLASS2 SERIAL DATA LINK SPECIFICATION Dec. 14 1989
- Delco Electronics Data Link Controller Data sheets DLSC Dec. 7 1989
- Delco Electronics Data Link Controller Data sheets DLC-03/04A Dec. 21 1989
- Delco Electronics class2 Bus Message Generator Operation Dec. 19 1989
- Delco Electronics DLCS Data Link Controller Serial IC Data Sheets June 25 1990
- Delco Electronics DLCS/P DATA LINK CONTROLLER SERIAL/PARALLEL IC USER'S GUIDE June 25 1990
- Delco Electronics DLCS01A USER BUG LIST July 11 1990
- Delco Electronics DLCS Data Link Controller Serial IC Data Sheets REVISION B June 25 1990
- Delco Electronics DLCS/P DATA LINK CONTROLLER SERIAL/PARALLEL IC USER'S GUIDE June 25 1990
- GE/RCA GE/RCA Products CDP68HC68S1 Advance Information 1987
- Miesterfeld F.O.R. Chrysler Collision Detection(C 2 D) - A Revolutionary Vehicle Network SAE Paper 860389 1986
- SAE Collision Detection Serial Data Communications Multiplex Bus SAE Information Report, SAE J1567 AUG 1987
- Frassnacht R.E. et al Chrysler Collision Detection (C 2 D) Bus Interface,Integrated Circuit User Manual SAE Paper 880586 1988