This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dent-Resistant Brake-Hardening Steels for Automotive Outer-Body Applications
Annotation ability available
Sector:
Language:
English
Abstract
Bake-hardening steels are finding increased usage in automotive outer-body applications to achieve an improvement in dent resistance and, in some cases, a sheet thickness reduction as well. This paper reviews (1) bake-hardening specifications and measurements, (2) processing and properties of various types of bake-hardening steels and (3) effects of pre-strain, ambient aging and baking conditions on the hardening response.
Recommended Content
Technical Paper | The Effects of Room Temperature Aging on Subsequent Bake-Hardening of Automotive Sheet Steels |
Technical Paper | Fundamental Study of Ultra Scratch Resistance Coatings |
Authors
Citation
Pradhan, R., "Dent-Resistant Brake-Hardening Steels for Automotive Outer-Body Applications," SAE Technical Paper 910290, 1991, https://doi.org/10.4271/910290.Also In
References
- Kovach I. et al SAE Technical Paper No. 900715 1990
- Mizui N. et al 85 94 Proc. of Steel in Motor Vehicle Manufacture Verlag Stahleisen mbH Düsseldorf, Germany 1990
- Cockerill-Sambre Research Report “Bake-Hardening Measurement: L Renard and F. Beco” 1987
- Zaccone D. C. et al SAE Technical Paper No. 900714 1990
- Kurosawa M. et al Kawasaki Steel Technical Report 18 1988 61 65
- N. V. Sidmar Research Report “Bake-Hardenability of Continuously Annealed Steel Sheet: U. Meers et al” 1985
- Takechi H. 117 138 Hot and Cold-Rolled Sheet Steels TMS-AIME Warrendale, PA, USA 1988
- Prum N. et al SAE Technical Paper No. 860439 1986
- Matsudo K. et al 3 36 Technology of Continuously Annealed Cold-Rolled Sheet Steel TMS-AIME Warrendale, PA, USA 1985
- Yamazaki K. et al 327 336 Microalloyed HSLA Steels ASM Materials Park, OH, USA 1988
- Bleck W. et al “Comparison of Batch and Continuously Annealed Bake-Hardening Steels” IDDRG 1987
- Pradhan R. 309 325 Metallurgy of Vacuum-Degassed Steel Products TMS-AIME Warrendale, PA, USA 1990
- Okamoto A. et al SAE Technical Paper No. 820018 1982
- Tokunaga Y. Kato H. 91 108 Metallurgy of Vacuum-Degassed Steel Products TMS-AIME Warrendale, PA, USA 1990
- Obara T. et al 201 213 Scandinavian J. Met. 13 1984
- Nakaoka K. et al 126 141 Formable HSLA and Dual-Phase Steels TMS-AIME Warrendale, PA, USA 1977
- Gupta I. Chang P. H. 263 276 Technology of Continuously Annealed Cold-Rolled Sheet Steel TMS-AIME Warrendale, PA, USA 1985
- Pradhan R. 297 317 Technology of Continuously Annealed Cold-Rolled Sheet Steel TMS-AIME Warrendale, PA, USA 1985
- Nakaoka K. et al 330 345 Structure and Properties of Dual-Phase Steels TMS-AiME Warrendale, PA, USA 1979
- McFarland W. H. 155 162 Proc. of 30th Mechanical Working and Steel Processing ISS-AIME Warrendale, PA, USA 1988
- Metalworking News July 31 1989 2 37