Review of the Cold Starting Performance of Methanol and High Methanol Blends in Spark Ignition Engines: Neat Methanol

Authors

• D.P. Gardiner - Department of Mechanical Engineering Royal Military College Kingston, Ontario
• M.F. Bardon - Department of Mechanical Engineering Royal Military College Kingston, Ontario
• V.K. Rao - Department of Mechanical Engineering Royal Military College Kingston, Ontario
• V. Battista

Topic

• Spark ignition engines
• Methanol
• Starters and starting

Citation

Also In

References

1. Freeman R.V. Goetz W.A. “Performance Evaluation and Emissions of Neat Methanol Fuelled Vehicles - Phase 1B” Final Report No. 4379 ES/CAFV/ 84-28 1985
2. Nichols R.J. “Further Development of the MethanolFuelled Escort” SAE Paper # 830900 Society of Automotive Engineers Warrendale, PA 1983
3. Laveskoy A. Gillbrand P. Nilsson O. “Experiences from Construction and Testing of a Saab 16v M100-Car” Proc. of the VIII International Symposium on Alcohol Fuels Nov. 13-16 Tokyo 387 392 1988
4. Nebolon J. et al “Multi-Point Injection of Alcohol Vapour as a Cold Starting Aid for Neat Alcohol Fuelled Vehicles,” Proc. of the Fifth International Alcohol Fuel Technology Symposium II 29 36 1982
5. Menrad H. Lee W. Bernhardt W. “Development of a Pure Methanol Fuel Car,” SAE Paper # 770790 Society of Automotive Engineers Warrendale, PA 1977
6. Pefley R.K. Browning L.H. “Research and Development of Alcohol Fuel Usage in Spark-Ignited Engines,” U.S. Department of Energy Report DOE/CE/50036-H1 April 1986
7. Blair D.M. “Effects of Cranking Speed and Finely Atomized Fuel Delivery on Minimum Cold Starting Temperature of a Methanol-Fuelled (M100) Vehicle,” U.S. Environmental Protection Agency, Technical Report EPA/AA/CTAB- 88-04 May 1988
8. Kozole K.H. Wallace J.S. “The Use of Dimethyl Ether as a Starting Aid for Methanol-Fuelled S.I. Engines at Low Temperatures,” SAE Paper # 881677 Society of Automotive Engineers Warrendale, PA 1988
9. Iwachidou K. Kawagoe M. “Transient Unburned Methanol and Formaldehyde Emission Characteristics in Cold Operation of a S.I. Engine Powered by High-Methanol-Content Fuels,” Proc. of the VIII International Symposium on Alcohol Fuels 443 448 Nov. 5-9 1988
10. Höchsmann G. “Cold Start Capability of Methanol-Fuelled Engines,” March 1989
11. Iwai N. et al “A Study on Cold Startability and Mixture Formation of High-Percentage Methanol Blends,” SAE Paper # 880044 Society of Automotive Engineers Warrendale, PA 1988
12. Ito S. Sato A. Ichimiya T. “Performance of a Methanol Fuelled Car,” SAE Paper # 811383 Society of Automotive Engineers Warrendale, PA 1981
13. Gardiner D.P. Caird S.G. Bardon M.F. “Spark-Ignition Engine Cold Starting with Methanol-Based Fuel Blends,” SAE Paper # 872067 Society of Automotive Engineers Warrendale, PA 1987
14. Bardon M.F. et al “Installation and Testing of Methanol Vehicle Engine to Examine Cold Starting Phenomena,” Mechanical Engineering Report #850301 Royal Military College of Canada Kingston, Ontario K7K 5L0 1985
15. Gardiner D.P. Bardon M.F. “The Effect of Cranking Speed on Cold Starting Performance with Methanol Fuels” Proc. of the VII International Symposium on Alcohol Fuels 191 195 1986
16. Nakajima Y. Saito T. Takayi Y. Katoh K. Iijima T. “The Influence of Fuel Characteristics on Vaporization in the S.I. Engine Cylinder During Cranking at Low Temperature,” SAE Paper # 780612 Society of Automotive Engineers Warrendale, PA 1978
17. Annand W.V.D. Gülder O.L. “Exhaust Emissions and Cold Starting of a Four-Cylinder Engine Using Methanol as Fuel,” Proc. Instn.Mech. Engrs. 194 139 143 1980
18. Browning L.H. Raghuraman G. “A Detailed Study of Alcohol Cold Starting” Proc. of the VI International Symposium on Alcohol Fuels Technology 1 63 69 1984
19. Gardiner D.P. Bardon M.F. “Cold Starting Tests on a Methanol Fuelled Spark Ignition Engine,” SAE Paper # 831175 Society of Automotive Engineers Warrendale, PA 1983
20. Bardon M.F. Rao V.K. Gardiner D.P. “An Experimental and Theoretical Comparison of Methanol and Gasoline Cold Starting Performance,” Proc. of the VI International Symposium on Alcohol Fuels Technology 1 16 22 1984
21. Siewert R.M. Groff E.G. “Unassisted Cold Starts to -29CCC and Steady-State Tests of a DirectInjection Stratified-Charge (DISC) Engine Operated on Neat Alcohols,” SAE Paper # 872066 Society of Automotive Engineers Warrendale, PA 1987
22. Jorgensen S.W. “Compression Temperatures in a Cold Cranking Engine,” SAE Paper # 880045 Society of Automotive Engineers Warrendale, PA 1988
23. Sobotowski R.A. “Evaluation of the Effect of Motor Oil Viscosity and Cranking Speed on the Cold Starting Performance of a Methanol Fueled, Spark-Ignited Engine” Sohio [BP Oil] 1986
24. Scholten J. Esch H.J. Pischinger F.F. “Cold Start Tests with a Methanol Fuelled Citybus Engine,” Proc. VI International Symposium on Alcohol Fuels Technology 1 339 343 1984
25. Rao V.K. Bardon M.F. “Computer Simulation of the Spark Ignition Engine,” Mechanical Engineering Report #87050 Royal Military College of Canada Kingston
26. Annand W.V.D. “Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines,” Proc. Inst. Mech. Engrs 177 36 1963
27. Woschni G. “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,” SAE Paper # 670931 Society of Automotive Engineers Warrendale, PA 1967
28. Rao V.K. Bardon M.F. “Convective Heat Transfer in Reciprocating Engines,” Proc. Inst. Mech. Engrs. 199 D3 1985
29. Bardon M.F. et al. “Cold Starting Performance of Spark Ignition Engines Using Methanol Based Fuels,” Mechanical Engineering Report #860301 Royal Military College of Canada Kingston 1986
30. Austen A.E.W. Lyn W.T. “Some Investigations on Cold-Starting Phenomena in Diesel Engines,” Proc.Auto.Div.Instn.Mech.Engrs. 1959-1960 5 111
31. Nightingale C.J.E. Tsatsumi V. “Improved Mixture Preparation for Better Cold Starting of S.I. Engines,” Automotive Engineer (London) 97 100 Oct./Nov. 1984
32. Nichols R.V. “Modification of a Ford Pinto for Operation on Methanol,” Proc.Alcohol Fuels Technology Third International Symposium 1 1979
33. Nichols R.J. Wineland R.J. “Techniques for Cold-Start of Alcohol-Powered Vehicles,” Proc. Fifth International Alcohol Fuel Technology Symposium II 118 123 1982
34. Browning L.H. “Alcohol Cold-Starting - A Theoretical Study,” 18th IECEC 2 586 591 1983
35. D.A Trayser et al “A Study of the Influence of Fuel Atomization, Vaporization and Mixing Processes on Pollutant Emissions from Motor Vehicle Powerplants,” Battelle Memorial Institute Report No. PB 18586 April 1986 Report No. PB209476 January 1972
36. Quader A.A. “The Axially-Stratified-Charge Engine,” SAE Paper # 820131 Society of Automotive Engineers Warrendale, PA 1982
37. Peters B.D. “Fuel Droplets Inside the Cylinder of a Spark Ignition Engine with Axial Stratification,” SAE Paper # 820132 Society of Automotive Engineers Warrendale, PA 1982
38. Chmela F. “High Compression Stratified Charge Engines and Their Suitability for Conventional and Alternate Fuels,” Paper C400/80, I.Mech.E.Conf. on Stratified-Charge Engines 25-26 Nov. 1980
39. Kroeger CA. “A Neat Methanol Direct Injection Combustion System for Heavy-Duty Applications,” SAE Paper #861168 Society of Automotive Engineers Warrendale, PA 1986
40. Lewis J.M. “UPS Multi-Fuel Stratified Charge Engine Development Program - Field Test” SAE Paper # 860067 Society of Automotive Engineers Warrendale, PA 1986
41. Dale J.D. Oppenheim A.K. “Enhanced Ignition for I.C. Engines with Premixed Gases,” SAE Paper # 810146 Society of Automotive Engineers Warrendale, PA 1981
42. Paganelli J. “PTC Ceramic Heaters in Automotive Controls,” SAE Paper # 840143 Society of Automotive Engineers Warrendale, PA 1984
43. Weber I.V. Hüttebräucker D. “Cold Starting with Methanol Fuels,”
44. Kim Y.K. et al “Improvement of Alcohol Engine Performance by Flash Boiling Injection,” JSAE Review 81 86 1980
45. Mischke A. Koerner D. Bergmann H. “The Mercedes-Benz Alcohol-Gas-Engine M407LGO,” Proc. Fifth International Alcohol Fuel Technology Symposium 11 309 316 1982
46. Pettersson L. Sjöström K. “Decomposed Methanol - An Excellent Cold Start Fuel for Spark Ignition Engines,” Proc. VII International Symposium on Alcohol Fuels 7782 1986
47. Karpuk M.E. Cowley S.W. “On Board Dimethyl Ether Generation to Assist Methanol Engine Cold Starting,” SAE Paper # 881678 Society of Automotive Engineers Warrendale, PA 1988
48. Dellis E. A. “Methanol Marathon 1989,” Automotive Engineering 97 7 28 37 1989
49. Mitchell D.K. “The Effects of Blending Agents on the Cold Weather Operations of Methanol Fuelled Automobiles,” Proc. of the VI International Symposium on Alcohol Fuels Technology 1 272 280 1984
50. Haahtela O. Decker G. “Present and Future Fuels and Lubricants in Cold Climate Operation,” SAE Paper # 890032 Society of Automotive Engineers Warrendale, PA 1989
51. Dempsey A.B. Goetz W.A. “Cold Start Testing of Methanol Powered Vehicles,” Technical Report No.5030-1 ES/CAFV/86-16 submitted to: Transport Canada Traffic Safety Standard and Research Ottawa, Ontario Sept. 30 1986
52. Pefley R. et al “Methanol Fuelled Vehicles for the Federal Government,” presented at the Tenth Annual Energy Sources Technology Conference Dallas, Texas February 1987
53. Battista V. “Performance and Safety Associated with the Use of Methanol as an Automotive Fuel,” Proc. of the VI International Symposium on Alcohol Fuels Technology 3 292 297 1984
54. Fanick E. Smith L.R. Baines T.M. “Safety Related Additives for Methanol Fuel,” SAE Paper # 841378 Society of Automotive Engineers Warrendale, PA 1984
55. Machiele P.A. “Flammability and Toxicity Trade Offs with Methanol Fuels,” SAE Paper # 872064 Society of Automotive Engineers Warrendale, PA 1987
56. Bardon M.F. et al “A Vapour Pressure Model for Methanol/Gasoline M85 Blends,” SAE Paper # 870366 Society of Automotive Engineers Warrendale, PA 1987
57. Wiens F.J. et al “California's Alcohol Fleet Test Program - Final Results,” Proc. VI International Symposium on Alcohol Fuel Technology 3 367 379 1984
58. Robinson J.E. “Methanol Fuel Primers for Cold Starting and Driveability,” Sohio [BP Oil] 1983
59. Bernstein L.S. Panzer J. “Priming Agents for Methanol as an Automotive Fuel,” Proc. Fifth International Alcohol Fuel Technology Symposium II 22 28 1982
60. Standard Specifications for Automotive Gasoline 1981 Annual Book of ASTM Standards, Part 23; Petroleum Products and Lubricants
61. Menrad H. Decker G. Bernhardt W. “Experiences with Methanol Fuel Composition,” Proc. VIII International Symposium on Alcohol Fuels, Post Proceedings 93 96 1988
62. Tsukasaki Y. et al “Methanol Fuelled Vehicle Development in Toyota,” Proc. VII International Symposium on Alcohol Fuels 154 159 1986
63. Iwai N. et al “Effects of Additive Components on Near Neat Methanol Fuels on the Cold Startability and Hot Weather Driveability,” Proc. VIII International Symposium on Alcohol Fuels 863 868 1988
64. Niwa, K. Sakai, T. Seki, H. “Feasibility Study on the Utilization of Methanol for the Autmobile in Japan” Proc. of the VIII International Symposium on Alcohol Fuels 1257 1261
65. Suga T. et al “Feasibility Study of a Methanol Fuelled Vehicle at Honda,” Proc. VIII International Symposium on Alcohol Fuels 375 380 1988
66. Freeman R.V. Goetz W.A. “Cold Start Testing of GM Dual Fuel Pontiac 6000,” Technical Report ES/CAFV/84-50 Transport Canada, Traffic Safety Standard and Research Ottawa, Ontario K1A ON5 November 28 1984
67. Montemayor A.F. Baber B.B. Owens E.C. “Cold Startability of Methanol Fuelled Chevrolet S-10 Vehicles,” Interim Report BFLRF No. 221, Belvoir Fuels and Lubricants Research Facility (SwRI) Southwest Research Institute San Antonio, Texas
68. Freeman R.J. Goetz W.A. “M100 Phase II Program - Cold Start Testing of V.W. Golf GTI,” Technical Report No.458l/II-2, ES/CAFU/85-21 Transport Canada, Traffic Safety Standard and Research Ottawa, Ontario K1A ON5 May 22 1985
69. Quader A.A. “What Limits Lean Operation in Spark Ignition Engines - Flame Initiation or Propagation?” SAE Paper # 760760 Society of Automotive Engineers Warrendale, PA 1976
70. Maekawa K. Ohsawa N. Akasaka A. “Development of a Valve Timing Control System,” SAE Paper # 890680 Society of Automotive Engineers Warrendale, PA 1989
71. Kawamura Y. et al “MBT Control Through Individual Cylinder Pressure Detection,” SAE Paper # 881779 Society of Automotive Engineers Warrendale, PA 1988
72. Anastasia C.M. Pestana G.W. “A Cylinder Pressure Sensor for Closed Loop Engine Control,” SAE Paper # 870288 Society of Automotive Engineers Warrendale, PA 1987
73. Höchsmann G. “Possibilities of Improving the ColdStarting Behaviour of Methanol-Fuelled SI Engines,” Oct. 1987
74. Viewertz S. et al “Saab Direct Ignition System and Its Cold Start Performance,” SAE Paper #89044 Society of Automotive Engineers Warrendale, PA 1989
75. Smith C.S. Nichols R.V. “Durability Experience of the Methanol-Fueled Escort Fleets,” Proc. of the VI International Symposium on Alcohol Fuels Technology III 340 346 1984
76. Wineland R. “An Update on the FORD Flexible Fuel Technology,” (Oral Only) presented at the 5th Windsor Workshop on Alternate Fuels June 12 14 1989
77. Gardiner D.P. Bardon M.F. Rao V.K. ‘Review of the Cold Starting Performance of Methanol and High Methanol Blends in Spark Ignition Engines,“ prepared for Transport Canada, Thermotech Engineering Kingston, Ontario November 1989

Cited By