This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Metal Oxide Regenerate Carbon Dioxide Removal System for an Advanced Portable Life Support System
Annotation ability available
Sector:
Language:
English
Abstract
The extravehicular activity (EVA) requirements for Space Station Freedom and future long-duration space missions demand advanced technologies for the life support subsystems in the astronaut portable life support system (PLSS). A NASA-funded program is currently underway to develop a full-scale, breadboard, regenerate metal oxide carbon dioxide (CO2) removal system. This technology is a promising concept to replace the lithium hydroxide absorber presently used for removing CO2 in the recycled breathing gas in the PLSS, but cannot be efficiently regenerated to be used for another EVA mission.
In the metal oxide carbon dioxide removal system, an “active” metal oxide compound, contained within a solid absorbent material, effectively removes the CO2 by chemically reacting to form a metal carbonate during astronaut EVA. The absorbent is then regenerated thermally, by decomposing the resulting carbonate and thereby releasing CO2, to reform the metal oxide. This regenerate CO2 removal system, which can be used for many EVA missions, will reduce expendables and logistics requirements associated with the method presently used for CO2 removal.
This paper discusses the factors which must be considered in selection of a metal oxide absorbent for CO2 removal for space applications, and the laboratory tests performed on metal oxide absorbent materials which were developed during the first phase of the program. These tests include both characterization studies and dynamic CO2 uptake and regeneration measurements. The preliminary design of the breadboard system, which performs both the absorption and regeneration functions, is also presented.
Recommended Content
Citation
Nacheff, M., Colombo, G., Chang, C., and Cusick, R., "Metal Oxide Regenerate Carbon Dioxide Removal System for an Advanced Portable Life Support System," SAE Technical Paper 891595, 1989, https://doi.org/10.4271/891595.Also In
References
- Advanced Extravehicular Protective Systems (AEPS) Study NASA CR-114321 May 1971
- Advanced Extravehicular Protective Systems (AEPS) Study 1971
- Carbon Dioxide Adsorbent Study NASA CR-114661 September 1973
- Onischak M. Baker B. “Development of a Prototype Regenerable Carbon Dioxide Absorber for Portable Life Support Systems,” J. Eng. for Industry 100 383 August 1978
- Colombo G. V. Study of CO 2 Sorbents for Extravehicular Activity NASA CR-114632 July 1973
- Culbertson, W. J. Jr. Investigation and Design of a Regenerable Silver Oxide System for Carbon Dioxide Control AMRL-TR-64-119 1964
- Colombo G. V. Mills E.S. “Regenerative Separation of Carbon Dioxide via Metallic Oxides,” Chem. Eng. Prog. Symp. Ser. 62 63 89 1966
- Wydeven T. “Reversible Thermal Phenomena in Silver Carbonate,” Aust. J. Chem. 20 2751 1967
- Wydeven T. Bassler J. Aust. J. Chem. 20 769 1967
- Wydeven T. Leban M. “Thermal Decomposition Kinetics of Silver Carbonate as Determined by the Infrared Disk Technique,” Anal. Chem. 40 2 363 1968
- Wydeven T. Leban M. “Heats of Adsorption of Carbon Dioxide on Silver (I) Oxide and Copper (II) Oxide as Determined by Gas Chromatography,” J. Chromatog. Sci. 7 445 1969
- Barnes P. A. O'Connor M. F. Stone F. S. “Reactivity of Silver Oxide in the Absorption of Carbon Dioxide,” Inorg. Phys. Theor., J. Chem. Soc A 3395 1971
- Wydeven T. Rand E. “Thermal Decomposition of Yttrium-Doped Silver Carbonate,” J. Catal. 12 271 1968
- Wydeven T. “Thermal Decomposition of Gadolinium-Doped Silver Carbonate,” J. Catal. 16 82 1970
- Flytzani-Stephanopoulos M. Gavalas G. R. Sharma P. K. Novel Sorbents for High-Temperature Regenerative H 2 S Removal DOE/MC/20417-1825 March 1985