This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Engine Vibration and Noise Reduction Using a Crank-Block System Model
Annotation ability available
Sector:
Language:
English
Abstract
A coupled engine-block and crankshaft model is developed and applied to predict the engine block vibration and radiated noise. Block surface vibration which is excited by combustion pulses and inertia loads is investigated as the source of radiated noise. The predicted response shows the dominant engine harmonics, resonant frequencies, global modes and local surfaces which participate to produce the radiated noise. A structural modification is evaluated which reduces the transmission of the loads through the bulkheads, and significant vibration and noise reduction is predicted.
Authors
Citation
Sung, S. and Nefske, D., "Engine Vibration and Noise Reduction Using a Crank-Block System Model," SAE Technical Paper 891129, 1989, https://doi.org/10.4271/891129.Also In
References
- Ochiai K. Nakano M. “Relation Between Crankshaft Torsional Vibration and Engine Noise,” SAE Paper No. 790365 , Transactions 1979 1291 1298
- Kubozuka T. Hayashi Y. Hayakawa Y. Kikuchi K. “Analytical Study of Engine Noise Caused by the Vibration of the Cylinder Block and Crankshaft,” SAE Paper No. 830346 , Transactions 1983 1191 1199
- Tyrrell R. J. Croker D. M. “Engine Noise: Practicalities and Prediction, Part 2 - Finite Element Analysis,” SAE Paper No. 870978 , Transactions 1987 229 239
- Maekawa K. Morita S. “Calculation of Radiated Noise From Cylinder Block Using Finite Element Model,” Int. J. of Vehicle Design 6 2 1985 228 239
- Nagayama I. Araki Y. Kakuta K. Usuba Y. “Engine Noise Reduction by Structural Study of Cylinder Block,” SAE Paper No. 800441 , Transactions 1980 1741 1748
- Usuba Y. Nagayama I. Araki Y. Kakuta K. “The Role of Static and Dynamic Finite Element Analysis in Designing Low-Noise Cylinder Blocks,” SAE Paper No. 830251 , Transactions 1983
- Ogawa N. Hayashi Y. Hayakawa Y. Kubozuka T. “Engine Noise Reduction by Suppression of Vibration of Main Bulkheads and Caps,” Noise Control Engineering Journal February 1988 16 21
- Ishihama M. Shibuya H. Okamura H. “An Experimental and Mathematical Study on the Vibration Phenomena in the Combined Crankshaft-Power Plant Structure Under Operating Conditions,” Proceedings of NOISE-CON 88, “Noise Control Design: Methods and Practice” Bolton J. June 1988 81 86
- Nefske D. J. Sung S. H. “Coupled Vibration Response of the Engine Crank-Block System,” December 1988 presented at the 12th ASME Conference on Mechanical Vibration and Noise Montreal, Canada Sep. 17-20 1989
- Beranek L. L. “Noise and Vibration Control,” McGraw-Hill Book Company New York 1971
- Cuschieri J. M. Richards E. J. “On the Prediction of Impact Noise, Part VIII: Diesel Engine Noise,” Journal of Sound and Vibration 102 1 1985 21 56
- Sung S. H. “Vibration and Noise Radiation Analysis of Stringer-Stiffened Panels,” The American Society of Mechanical Engineers 1986