This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermodynamic Analysis and Optimization of Two-Stroke Gasoline Engines
Annotation ability available
Sector:
Language:
English
Abstract
AVL's research program on highly fuel efficient low emission two-stroke engines initiated the development of an advanced cycle simulation program to optimize the intake and exhaust systems and the port timing, as well as the investigation of various fuel or mixture injection systems. The current paper covers the application of the engine simulation program to multi-cylinder engines and presents a summary of the latest test results with the AVL-Direct Mixture Injection System on a 250cc single-cylinder research engine.
An analysis of the gas dynamics in the exhaust system of a crankcase scavenged automotive three-cylinder engine is presented and the influence of important dimensions of the exhaust manifold on the pressure wave propagation and on the torque characteristic of the engine is discussed in detail. For an alternative blower scavenged engine configuration the influence of the blower match on the engine performance is investigated as wall as the effect of a variable port timing on the torque curve.
In case that direct injection systems employing compressed cylinder gas to premix and evaporate the fuel are considered, the high pressure cycle is obviously influenced by the characteristics of the injection system. Some important results of a detailed parametric study on this problem are presented and interpreted. Finally, the paper presents a summary of engine test results with the AVL-Direct Mixture Injection System, which demonstrate the anticipated advantages of this system with respect to low hydrocarbon emissions, stable engine operation and excellent fuel consumption.
Recommended Content
Authors
Topic
Citation
Landfahrer, K., Plohberger, D., Alten, H., and Mikulic, L., "Thermodynamic Analysis and Optimization of Two-Stroke Gasoline Engines," SAE Technical Paper 890415, 1989, https://doi.org/10.4271/890415.Also In
References
- Plohberger D. Mikulic L.A. Landfahrer K. “Development of a Fuel Injected Two-Stroke Gasoline Engine” SAE-Paper 880170
- Scherenberg H. “Rückblick über 25 Jahre Benzin-Einspritzung in Deutschland” MTZ 16 9 September 1955
- Voit W. Stoll H. “Benzineinspritzung am Fahrzeug-Ottomotor” MTZ 13 9 September 1952
- Froede W. “Benzineinspritzung für kleine Zylinder von Ottomotoren” MTZ 57 8 August 1955
- “Zweitakteinspritzung bei Gutbrod und Goliath” MTZ 13 10 Oktober 1952
- Groth K. “Das Betriebsverhalten des schnellaufenden Zweitaktottomotors mit Einspritzung und seine Ent-wicklungsmōglichkeiten” Deutsche Kraftfahrtforschung und Straβenverkehrstechnik 125 VDI 1959
- Kuentscher V. “Application of Charge Stratification, Lean Bum Combustion Systems and Anti-Knock Control Devices in small Two Stroke Cycle Gasoline Engines” SAE Paper 870171 1986
- Kuentscher V. “Ladungsschichtung und Magerkonzept-Verbrennung im Zweitakt-Ottomotor mit elektronisch gesteuerter Druckstoβeinspritzung” Wissenschaftliche Beiträge der IH Zwickau 10 1984
- Nuti R. “Direct Fuel Injection: An Opportunity for Two-Stroke SI Engines in Road Vehicle Use” SAE Paper 860170 1986
- Oschatz W. “Kraftstoffaufbereitung durch die Ein-spritzdüse” Deutsche Kraftfahrtforschung 57 VDI Verlag Berlin 1941
- Friedel “Gemischbildung und Düsenentwicklung am Einspritz-Zündmotor; II. Bericht, Die Wirkung von Luftströmen auf Kraftstoffstrahlen” Deutsche Luft-fahrtforschung, untersuchungen und Mitteilungen 6936 Dresden 1944
- Rothrock A.M. Spencer R.C. “Effect of Moderate Air Flow on Fuel Sprays after Injection Cut Off” Report National Committee for Aeronautics No. 483 1933
- Bianchi L. “Bombenversuche über Gemischbildung und Verbrennung bei Benzineinspritzung” Deutsche Kraftfahrtforschung, Zwischenbericht 94 1941
- Kühl H. “Grundlagen der Gemischregelung beim Ein-spritz-Ottomotor mit Durchspülung” Deutsche Luft-fahrtforschung, Forschungsbericht 1546 1942
- Augustin U. “Die Einspritzung von Leichtkraft-stoffen in Flugmotoren” ATZ 47 1944 3/4 30
- Brook K. Nicolls “Some Aspects of Petrol-Injections” Equipment Developments 1947/48
- Campbell J.F. “Fuel Injection as Applied to Aircraft Engines” SAE Journal 36 1935 3 77
- Dollinger “Untersuchungen an einan Zweitaktmotor mit Kraftstoffeinspritzung” Deutsche Kraftfahrtforschung, Zwischenbericht 9
- Schmidt U. Froede W. “Zweitaktmotoren rait Benzineinspritzung” Deutsche Kraftfahrtforschung, Zwischenbericht 68 1938
- Morghen K. “Die Energieumsetzung im Zweitakt-Ottomotor mit Umkehrspülung bei Benzineinspritzung” Deutsche Luftfahrtforschung, Forschungsbericht 1688 1942
- Morghen K. “Die Energieumsetzung im Zweitakt-Otto-motor bei Benzineinspritzung” ZWB Forschungsbericht 1740 1942
- Froede W. “Sonderfragen der Benzineinspritzung” Deutsche Kraftfahrtforschung, Zwischenbericht 363 1940
- Duret P. Ecomard A. Audinet H. “A New Two-Stroke Engine with Compressed-Air Assisted Fuel Injection for High Efficiency Low Emissions Application” SAE-Paper 880176 1988
- Ahmadi-Befrui B. Brandstätter W. Kratochwill H. “Multidimensional Calculation of the Flow Processes in a Loop-Scavenged Two-Stroke Cycle Engine” SAE congres Detroit 27. Feb. - 2. March, 1989