This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Powder Metal Parts for Automotive Applications–Part III
Annotation ability available
Sector:
Language:
English
Abstract
The constant challenge for automotive engineers to design vehicles with greater reliability at lower cost has brought powder metallurgy (P/M) to the foreground. This technology provides parts to or near net shape and results in savings of material, energy, capital equipment and floor space. This paper is an extension of SAE reports 850458 and 870133 and describes automotive powder metal components not previously identified. It should help engineers find cost effective applications early in the design stage so that P/M technology can be efficiently adopted. In addition, recent important technological developments in the P/M field applicable to automotive parts are highlighted. In particular, increased reliability achieved through SPC is stressed. A novel blending process is described whereby the alloying ingredients are “glued” to iron powder particles resulting in an increase in P/M quality through improved homogeneity. Also a new family of P/M parts for high strength heavy duty applications which successfully competes with castings and forgings is described.
Recommended Content
Authors
Topic
Citation
Mocarski, S., Hall, D., Khanuja, J., and Suh, S., "Powder Metal Parts for Automotive Applications–Part III," SAE Technical Paper 890409, 1989, https://doi.org/10.4271/890409.Also In
References
- Hall D. W. Mocarski S. “Powder Metal Parts for Automotive Applications” SAE paper 8540458 SAE 1985, Congress and Exposition Detroit
- Mocarski S. Hall D. W. “Powder Metal Parts for Automotive Applications, Part II” SAE Paper 870133 SAE 1987, Congress and Exposition Detroit
- Winquist L. A. “Automotive Applications of Standard P/M Parts” Modern Developments in Powder Metallurgy 6 Hausner H. H. Smith W. E. Proceedings (1973) International Powder Metallurgy Conference MPIF
- White Donald G. “The Growing Internationalism of P/M.” Proceedings of the 1988 International Powder Metallurgy Conference Orlando, Florida Gummeson P. U. Gustafson D. A. MPIF
- Meek G. E. Dunning K. A. “Implementing SPC in a P/M Operation - The Results” SAE paper 880115 SAE Int. Congress & Exposition Detroit 1988
- Hummert K. Arnhold V. “Rapid Density Determination of P/M and Ceramic Parts With The Gamma-Densomat” Metal Powder Report 41 11 Nov. 1986
- Capus J. “A New Era for Iron and Steel Powders at Quebec Metal Powders, Ltd.” The International Journal of Powder Metallurgy Jan. 1987
- Ruas C. Davison J. E. “Statistical Process Control in Iron Powder Manufacturing” Powder Metallurgy 1987
- Edgar R. L. Poirier J. P. Trudel Y. “QMP - Preparing for the Future” Metal Powder Report May 1988 310
- Gagne M. Cilogu C. Trudel Y. “Manufacturing of Clean Steel Powders for P/F Applications” Proceedings of the 1988 International Powder Metallurgy Conference Orlando, FL Gummeson P. U. Gustafson D. A. MPIF
- Gummeson P. U. Kasputis D. J. “SPC in Steel Powder Manufacturing” The International Journal of Powder Metallurgy 23 4 Oct. 1987 261
- Semel F. J. Kasputis D. J. Gummeson P. U. “Statistical Process Control in Iron Powder Production and New Product Development” SAE paper 820114 SAE 1988, Congress and Exposition Detroit
- Engstrom U. “Glued Powder Mixes for Improved Tolerance Control” Metal Powder Report January 1987 42 1 22
- Semel F. J. “Properties of Parts Made from Ancorbond Processed F-0008/Carbon Steel Mix” Proceedings of International P/M Conference, P/M 88 Orlando, Florida Gumeson P. U. Gustafson D. A. MPIF
- Semel F. J. “Properties of Parts Made from A Binder Treated 0.45% Phosphorus Containing Iron Powder Blend” Proceedings of the Annual P/M Conference Dallas, Texas 1987 MPIF
- Unkel R. Cincinnati Inc., Private Communication Nov. 11 1988
- Fischer E. “Optimisation of Compacting Process of P/M Products” Powder Metallurgy International 20 1988 32 34 27 30
- Fischer E. “Modern Forming Operation In Powder Metallurgy” Metal Powder Report 41 2 February 1986
- Pease L. F. III “Injection Molding” International Journal of Powder Metallurgy 22 3 17
- Pease L. F. III “Global Outlook for Metal Injection Molding” Journal of Metals April 1988
- Mocarski S. Hall D. W. “Changes in Microstructure of Ferrous Powder Metal Compacts During High Temperature Sintering” SAE Paper 800306 SAE Congress 1980
- Arnhold V. Beiss P. “Krebsoege, Portrait of a P/M Manufacturer” The International Journal of Powder Metallurgy 24 1 Jan. 1988 77