This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Reliable Single Cylinder Engine Test for Evaluation of Today's Heavy-Duty Diesel Oils for Oil Consumption and Piston Deposits
Annotation ability available
Sector:
Language:
English
Abstract
This paper reports a lubricant study conducted on a Caterpillar 1Y540 single-cylinder engine test equipped with a 34068 truck production piston. The sequence test, run under well controlled conditions for a large number of CE and CD+ diesel oils, shows a good discrimination of the lubricant for oil consumption and piston deposits and similar to that given by new North American multicylinder engine tests utilizing LTL pistons. Owing to its excellent reliability, adequate severity, and availability of hardware parts, this engine test provides a suitable alternative for replacement of the Caterpillar 1G2 and EMA SCOTE-1.
Citation
Benchaita, M., "A Reliable Single Cylinder Engine Test for Evaluation of Today's Heavy-Duty Diesel Oils for Oil Consumption and Piston Deposits," SAE Technical Paper 881582, 1988, https://doi.org/10.4271/881582.Also In
References
- Taylor, C. F. “The Internal Combustion Engine in Theory and Practice,” 2 Combustion, Fuels, Materials, Design The MIT Press 1985
- McGeehan, J. A. Kulkarni, A. V. “Mechanism of Wear Control by the Lubricant in Diesel Engines,” SAE paper 872029 1987
- ASTM Test Procedure ‘1-J’ 1985
- Hercamp, R. D. “Premature Loss of Oil Consumption Control in a Heavy Duty Diesel Engine,” SAE paper 831720
- Schtelich, A. Fetterman, G. P. “The Control of Piston Crown Land Deposits in Diesel Engines through Oil Formulation,” SAE paper 861517 1986
- Signer, M. Steinke, R. E. “Future Trends in Diesel Engine Design and their impact on Lubricants,” SAE paper 871271 1987
- Wilson, J. D. Calow, J. R. B. “Cylinder Bore Polishing in Automotive Diesel Engines - A Progress Report on a European Study,” SAE paper 760722 1976
- Knight, C. H. “Bore Polishing - Tornado Test Development,” SAE paper 861518 1986
- McGeehan, J. A. Fontana, B. J. Kramer, J. D. “The Effects of Piston Temperature and Fuel Sulfur on Diesel Engine Piston Deposits,” SAE paper 821216
- Schmitt, G. M. Michael, M. I. “Performance of Multigrade Oils in Off-Highway Diesel Engines,” SAE paper 801348 1980
- Davies, J. M. Walters, K. “The Rheology of Lubricants,” Davenport Tc. 1973 App. Sci. Publishers Ltd. Barking 65 80
- Hutton, J. F. Jones, B. Bates, T. W. “Effects of Isotropic Pressure on the High Temperature High Shear Viscosity of Motor Oils,” SAE paper 830030 1983
- Moore, S. L. “Piston Ring Oil Film Thickness - The Effect of Viscosity,” SAE paper 850439 1985
- Schilling, A. “Automobile Engine Lubrication,” II Scientific Publications, (G. B.) Ltd. 6.19 6.22 1972
- McGeehan, J. A. “A Single Cylinder High Bmep Engine for Evaluating Lubricant Effects on Piston Deposits, Ring Wear, Oil Consumption, and Bore Polishing,” SAE paper 800437
- Dowling, M. Pritchard, J. R. Crawley, B. W. “A Severe Single Cylinder Diesel Engine Test for European SHPD Oils,” SAE paper 872033
- Covitch, M. T. Gundic, D. T. Graf, R. T. “Microstructure of Carbonaceous Diesel Engine Piston Deposits,” Anaheim 1987
- Rounds, F. G. “Carbon: Cause of Diesel Engine Hear,” SAE paper 770829
- Rounds, F. G. “Soots from Used Diesel Engine Oils - Their effects on Wear as Measured in 4-Ball Hear Tests,” SAE paper 810499
- Kreuz, K. L. “Diesel Engine Chemistry as Applied to Lubricant Problems,” Lubrication 56 6 77 88 1970
- McGeehan, J. A. Fontana, B. J. “Effects of Soot on Piston Deposits and Crankcase Oils - Infrared Spectrometric Technique for Analyzing Soot,” SAE paper 801368
- Eyre, T. S. Dent, N. Dale, P. “Wear Characteristics of Piston Rings and Cylinder Liners,” ASLE/ASME Lubrication Conference New Orleans 1981
- Yahagi, Y. Nagasawa, Y. Hotta, S. Hizutanl, Y. “Corrosion Hear of Cast Iron under Reciprocating Lubrication,” SAE paper 861599 1986