This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Lean-Burn Catalytic Engine
Annotation ability available
Sector:
Language:
English
Abstract
Theoretical analysis of flame propagation through catalytically activated mixtures and fundamental experiments with a catalytic plug-flow reactor have shown that catalytic prereaction can increase flame velocity and can reduce minimum ignition energy requirements. These principles have been successfully applied in a prechamber for a leanburn internal combustion engine. Unlike other catalytic engine concepts, catalytic prechamber technology serves to regulate catalytic surface temperature as well as contact between the catalyst and gas phase reactants. Catalytic effects are thus properly timed and are confined to a small volume where substantial thermal activation is possible. Catalytic charge activation in a CFR engine was found to decrease cycle-to-cycle pressure variation and to increase cycle efficiency near the lean-burn limit. These effects were found to be more pronounced as the prechamber was made more adiabatic. When catalytic prereaction was more extensive the catalytic prechamber proved to be a knock-free compression-ignition source. In conjunction with these fundamental studies and parametric engine tests a physical model of in-cylinder activation has been formulated. This model has proven to be a valuable asset in understanding catalytic prechamber performance and promises to be a useful tool in optimizing catalytic prechamber design.
Recommended Content
| Technical Paper | Homogeneous-Charge Compression-Ignition (HCCI) Engines |
| Technical Paper | A Rationale for Advances in the Technology of I. C. Engines |
Authors
Topic
Citation
Beyerlein, S. and Wojcicki, S., "A Lean-Burn Catalytic Engine," SAE Technical Paper 880574, 1988, https://doi.org/10.4271/880574.Also In
References
- Murray, R. Performance and emission characteristics of a Semi-Adiabatic Engine ASME Paper 80-GDP-44 1980
- Siegla, D Plee, S. Heterogeneous catalysis in the diesel combustion chamber Combustion Science and Technology Vol 27 107 102 1982
- Haslett, R. United States patent 4,092,967 June 1978
- Thring, R. The catalytic engine-platinum improves economy and reduces pollutants from a range of fuels Platinum Metals Review Vol 27 4 126 1980
- Haskell, W. Legate, C. Exhaust hydrocarbon emissions from gasoline engines-surface phenomena SAE paper 720255 1975
- Houdry, E. United States patent 2,632,296 March 1954
- Pfefferle, W. Catalytic engine apparatus United States patent 3,923,011 December 1975
- Rychter, T. Saragih, R. Lezanski Wojcicki, S. Catalytic activation of a charge in a prechamber of a SI lean-burn engine Eighteenth Symposium (Int'l) on Combustion The Combustion Institute 1981
- Beyerlein, S. Wojcicki, S. Catalytically controlled combustion in a compression ignition engine Paper 87–80 1987
- Beyerlein, S. Catalytic Charge Activation in a Lean-Burn Internal Combustion Engine Ph.D. dissertation Washington State University 1987
- Marteney, P. Kesten, A. Kinetics of surface reactions in catalytic combustion Eighteenth Symposium (Int'l) on Combustion The Institute 1899 1981
- Schwartz, A. Holbrook, L. Wise, H. Catalytic oxidation studies with platinum and palladium Journal of Catalysis Vol 21 198 207 1971
- Collis, D. Williams, M. Two-dimensional convection from electrically heated wires at low Reynolds numbers Journal of Fluid Mechanics Vol 6 357 1959
- Harrington, J. Application of a new combustion analysis method in the study of alternative fuel combustion and emission characteristics Future Automotive Fuels Colucci J. Gallopoulus N. Plenum Press New York 1977
- Dale, J. Oppenheim, A. A rationale for advances in the technology of I.C. engines SAE paper 820047 1982