This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling of Sheet Metal Forming — A Status Report
Annotation ability available
Sector:
Language:
English
Abstract
Current computer capabilities have developed to the point where the modeling of sheet metal forming is feasible. To do so three individual elements of the process must be understood. They may be modeled or the results may be input in the form of empirical data. The three elements are: 1) binder wrap, 2) draw-bead restraining force, 3) the forming process. This paper will attempt to give an appreciation of the current level of progress in each of these areas and the extent to which these results can be integrated to accurately analyze the overall forming process.
Citation
Stevenson, R., "Modeling of Sheet Metal Forming — A Status Report," SAE Technical Paper 880523, 1988, https://doi.org/10.4271/880523.Also In
References
- Okamoto, I. Takahashi, A. Sugiura, H. Hiramatsu, T. Yamada, N. Mori, T. 1988 SAE Congress
- Triantifyllidis, N. J. Mech. Phys. Solids Vol. 33 117 1985
- Mickalich M. K. Wenner, M. L. 1988 SAE Congress
- Wenner, M. L. J. App. Metal Working Vol. 2 No. 4 277 1983
- Tang, S. C Chu E. Samanta, S. K. Proc. Int. Conf. on Numerical Methods in Industrial Forming Processing (by the Inst. of Numerical Methods in Engineering) Pitman J. F. T. et al. Swansea, United Kingdom 629 1982
- Mital, N. K. Proc. 1983 International Computers in Engineering Conference and Exhibit ASME 71 1983
- Chen, K.-K. ASME 84-WA/DE-6, ASME Winter Conference New Orleans December 1984
- Chen, K.-K Rechenbach, W. S. Vadhavkar, A. V. Assif, T. C. Proceedings of ASME Manufacturing International 88 April 17–20 1988 Atlanta, Georgia
- Nine, H. D. Mechanics of Sheet Metal Forming Koistinen D. P. Wang N.-M. 179 Plenum Press 1978
- Furubayashi, T. Misaka, H. Njihara, S. Sakamoto, T. 363 Int. Deep Drawing Research Group, 14th Biennial Congress Cologne 1986
- Levy, B. S. J. Applied Metalworking Vol. 3 38 1983
- Triantifyllidis, N. Maker B. Samanta, S. K. Trans. ASME, Jnl, Eng. Mat. and Tech. Vol. 108 321 1986
- Frey W. H. Wenner, M. W. presented at 1987 ASME Annual Winter Meeting, Boston, and published in Conference Proceedings
- Arlinghaus, F. J. Frey, W. H. Stoughton T. B. Murthy, B. K. Computer Modelling of Sheet Metal Forming Process - Theory, Verification and Application Wang N.-M. Tang S. C. 51 1985
- Gerdeen J. C. Soper, D. J. SAE Paper 851502 , 1985 International Off-Highway and Powerplant Congress and Exposition September 9–12 1985
- Lee D. Forth, C. M. Innovations in Materials Processing, Proc. 30th Sagamore Conference Bruggeman G. Weiss V. 161 Plenum Press 1985
- Ni, C.-M. presented at ASME Annual Winter Meeting December 1988 Chicago Conference Proceedings
- Chandra A. Mukherjee, S. Int. J. Sol. Struct. Vol. 20 41 1984
- Cavendish, J. C. Wenner, M. L. Burkhardt, J. Hall, C. A. Rheinbolt, W. C. Int. J. for Num. Methods in Eng. Vol. 23 847 1986
- Hora, P. Vu, T. C. Wollrab, P. M. Reissner, J. Advance Technology of Plasticity 1987 Proc. Second Int. Conf. on Tech. of Plasticity Stuttgart August 24/28 1987 Lange K. Vol. 1 633 Springer-Verlag
- Wang N.-M. Wenner, M. L. Mechanics of Sheet Metal Forming Koistinen D. P. Wang N.-M. 179 Plenum Press 1978