A New Approach to Integrating Engine Performance and Component Design Analysis Through Simulation

Authors

• Thomas Morel - Integral Technologies Inc., Westmont, IL
• Rifat Keribar - Integral Technologies Inc., Westmont, IL
• Paul N. Blumberg - Integral Technologies Inc., Westmont, IL

Topic

• Simulation and modeling
• Hardware
• Computer software and hardware

Citation

Also In

References

1. Alkidas, A. C. 1980 “Heat Transfer Characteristics of a Spark-Ignition Engine,” ASME Journal of Heat Transfer 102 May 1980 189 193
2. Annand, W. J. D. 1963 “Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines,” Proc. Inst. Mech. Eng. 177 36 973 996
3. Annand, W. J. D. Ma, T. H. 1970 “Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression-Ignition Engine,” Proceedings IMechE 1970-71 185 976 987
4. Asmus, T. W. 1982 “Valve Events and Engine Operation,” SAE Paper 820749
5. Benson, R. S. Woods, W. A. 1960 “Wave Action in the Exhaust System of a Supercharged Two-Stroke Engine Model,” Int. Journal of Mech. Sci. 1 253 281
6. Blizard, N. C. Keck, J. C. 1974 “Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engines,” SAE Paper No. 740191
7. Blumberg, P. N. Kummer, J. T. 1971 “Prediction of Nitric Oxide Emissions from Spark Ignited Engines: An Analysis of Methods of Control,” Combustion Science and Technology 4 73 95
8. Blumberg, P. N. Lavoie, G. A. Tabaczynski, R. J. 1979 “Phenomenological Models for Reciprocating Internal Combustion Engines,” Progress in Combustion and Energy Science 5 123 167
9. Borman, G. L. 1964 “Mathematical Formulation of Internal Combustion Processes and Performance Including Comparison with Experiment,” Ph.D. Thesis University of Wisconsin
10. Chapman, M. Novak, J. M. Stein, R. A. 1982 “Numerical Modeling of Inlet and Exhaust Flows in Multi-Cylinder Internal Combustion Engines,” ASME Symposium on Flows in Internal Combustion Engines November 14-19 1982 Uzkan T.
11. Fenimore, C. P. 1970 “Formation of Nitric Oxide in Premixed Hydrocarbon Flames,” Thirteenth Symposium (International) on Combustion The Combustion Institute
12. Gosnsan, A. D. 1985 “Multidimensional Modeling of Cold Flows and Turbulence in Reciprocating Engines,” SAE Paper 850344
13. Goyal, M. R. 1978 “Simulation of a Turbocharged Diesel Engine to Predict the Transient Response,” ASME Paper 78-DGP-11
14. Gulder, O. L. 1984 “Correlations of Laminar Combustion Data for Alternative S.I. Engine Fuels,” SAE Paper 841000
15. Hakim, N. S. Bennethum, J. E. 1986 “The Low Heat Rejection Reference Engine for On-Highway Applications,” Proceedings of the 24th Automotive Technology Development CCM SAE Publication P-197
16. Hardenberg, H. O. Hase, F. W. 1979 “An Empirical Formula for Computing the Pressure Rise Delay from its Cetane Number and from the Relevant Parameters of Direct-Injection Diesel Engines,” SAE Paper 790493
17. Heywood, J. B. 1976 “Modeling Combustion and Performance Characteristics of Internal Combustion Engines,” 1976 Heat Transfer and Fluid Mechanics Institute U. C. Davis
18. Hires, S. D. Tabaczynski, R. J. Novak, J. M. 1978 “The Prediction of Ignition Delay and Combustion Intervals for a Homogeneous Charge. Spark Ignition Engine,” SAS Paper 780232
19. Keribar, R Morel, T. 1986A “Methods for Thermo-Mechanical Analysis of Thermal Barrier Coatings in Diesel Engines,” Proceedings of 13th International Conference on Metallurgical Coatings April 1986 San Diego, CA
20. Keribar, R. Morel, T. Blumberg, P. N. 1986B “Coupled Methodology for Thermal Shock Calculations in i.e. Engines,” Proceedings of XXI FISITA Congress Belgrade, Yugoslavia June 1986
21. Keribar, R. Morel, T. 1987 “Thermal Shock Calculations in IC Engines,” SAE Paper. SAE Congress Detroit
22. Knight, B. E. 1955 “Communication on the Performance of a Type of Swirl Atomizer,” Proceedings of IMechE 104 105
23. Morel, T. Keribar, R. 1985 “A Model for Predicting Spatially and Time Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers,” SAE Paper 850204 SAE Congress
24. Morel, T. Keribar, R. Blumberg, P. N. 1985A “Cyclical Thermal Phenomena in Engine Combustion Chamber Surfaces,” SAE Paper 850360 SAE Congress
25. Morel, T. Fort, E. F. Blumberg, P. N. 1985B “Effect of Insulation Strategy and Design Parameters on Diesel Engine Heat Rejection and Performance,” SAE Paper 850506 SAE Congress Detroit
26. Morel, T. Keribar, R. 1986A “Heat Radiation in D.I. Diesel Engines,” SAE Paper 860445 SAE Congress
27. Morel, T. Keribar, R. Blumberg, P. N. Fort, E. F. 1986B “Examination of Key Issues in Low Heat Rejection Engine Concepts,” SAE Paper 860316 SAE Congress Detroit
28. Morel, T. Keribar, R. Sawlivala, M. Hakim, N. 1987A “Application of Several Variable-Valve-Timing Concepts to an LHR Engine,” ASME Symposium on Automotive Engine Technology Dallas, Texas February 1987
29. Morel, T. Wahiduzzaman, S. Tree, D. L. DeWitt, D. P. 1987B “Effect of Speed Load and Location on Heat Transfer in a Diesel Engine-Measurements and Predictions,” SAE Paper 870154 SAE Congress Detroit
30. Morel, T. Rackmil, C. I. Keribar, R. Jennings, M. J. 1988A “Model for Heat Transfer and Combustion in Spark Ignited Engines and Its Comparison with Experiments,” SAE Congress 1988
31. Morel, T. Wahiduzzaman, S. Fort, E. F. 1988B “Heat Transfer Experiments in an Insulated Diesel,” SAE Congress 1988
32. Namazian, M. Heywood, J. B. 1982 “Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power,” SAE Paper 820088
33. Olikara, G. Borman, G. L. 1975 “A Computer Program for Calculating Properties of Equilibrium Combustion Products with Some Applications to I. C. Engines,” SAE Paper 750468
34. Rhode, S. M. 1980 “A Mixed Friction Model for Dynamically Loaded Contacts with Application to Piston Ring Lubrication,” Proceedings of the 7th Leeds-Lyon Symposium on Tribology
35. Rhodes, D. B. Keck, J. C. 1985 “Laminar Burning Speed Measurements of Indolene-Air-Diluent Mixtures at High Pressures and Temperatures,” SAE Paper No. 850047
36. Ruddy, B. L. Dowson, D. Economou, P. N. 1981 “The Prediction of Gas Pressures Within the Ring Packs of Large Bore Engines,” J. of Mech. Eng. Sci. 23 6 295 304
37. Sher, E. 1985 “A New Practical Model for the Scavenging Process in a Two-Stroke Cycle Engine,” SAE Paper 850085
38. Sherman, R. H. Blumberg, P. N. 1977 “The Influence of Induction and Exhaust Processes on Emissions and Fuel Consumption in the Spark Ignited Engine,” SAE Paper 770880
39. Streit, E. E. Borman, G, L. 1971 “Mathematical Simulation of a Large Turbocharged Two-Stroke Diesel Engine,” SAE Paper 710176
40. Tabaczynski, R. J. Trinker, F. H. Shannon, B. A. S. 1980 “Further Refinement and Validation of a Turbulent Flame Propagation Model for Spark-Ignition Engines,” Combustion and Flame 39
41. Tanasawa, Y. 1953 “On the Combustion Rate of a Group of Fuel Particles,” Technology Reports of Tohoku University 18 1 1953 61 74
42. Ting, L. L. Mayer, J. L. 1974 “Piston Ring Lubrication and Cylinder Bore Wear Analyses, Part I - Theory,” Trans. ASME, Journal of Lubrication Technology July 1974 305 314
43. Uzkan, T. Borgnakke, C. Morel, T. 1983 “Characterization of Flow Produced by a High-Swirl Inlet Port,” SAE Paper 830266
44. VanGerpen, J. H. Huang, C-W. Boman, G. L. 1985 “The Effects of Swirl and Injection Parameters on Diesel Combustion and Heat Transfer,” SAE Paper 850265
45. Wahiduzzaman, S. Morel, T. Timar, J. DeWitt, D. P. 1987 “Experimental and Analytical Study of Heat Radiation in a Diesel Engine,” SAE Paper 870571 SAE Congress Detroit
46. Watson, S. Janota, M. S. 1982 Turbocharging the Internal Combustion Engine John Wiley-Interscience
47. Watson, N. Pilley, A. D. Marzouk, M. 1980 “A Combustion Correltion for Diesel Engine Simulation,” SAE Paper 800029
48. Watson, N. Marzouk, M. 1977 “A Non-Linear Digital Simulation of Turbocharged Diesel Engines under Transient Conditions,” SAE Paper 770123
49. Winterbone, D. E. Loo, W. Y. 1981 “A Dynamic Simulation of a Two-Stroke Turbocharged Diesel Engine,” SAE Paper 810377

Cited By