This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Lubricants Effects on Piston/Rings/Liner Friction in an Instrumented Single Cylinder Diesel Engine
Annotation ability available
Sector:
Language:
English
Abstract
Extensive measurements of oil film temperature and mainly of friction losses have been performed on an instrumented single-cylinder diesel engine. To assess the behavior of Newtonian and non-Newtonian oils in the piston/rings/liner contact, several operating conditions (running-in, motoring and firing) have been investigated. An original data processing method is proposed to evaluate the share of boundary friction in piston assembly friction loss.
Recommended Content
| Technical Paper | Piston and Ring Friction by the Fixed Sleeve Method |
| Technical Paper | Diesel Piston Debond - A Perspective |
| Technical Paper | Impingement Identification in a High Speed Diesel Engine Using Piston Surface Temperature Measurements |
Authors
Citation
Gauthier, A., Constans, B., Perrin, H., and Roux, F., "Lubricants Effects on Piston/Rings/Liner Friction in an Instrumented Single Cylinder Diesel Engine," SAE Technical Paper 872034, 1987, https://doi.org/10.4271/872034.Also In
References
- Furuhama S. Hiruma M. Yoshida H. “An increase of Engine Oil consumption at High Temperature of Piston and Cylinder.” SAE paper 810976
- Furuhama S. Hiruhama M. “Some Factors on Engine Oil Consumption through a Piston.” Proc. JSLE Trib. Conf. 8-10 July 1985 Tokyo, Japan
- Rhodes M.L.P. Parker D.A. “AEconoguide-The low Friction Piston.” SAE paper 840181
- Chin-Hsiu Li “Piston Thermal Deformation and Friction Considerations.” SAE paper 820086
- MacGeehan J.A. “A Literature Review of the Effects of Piston and Ring Friction and Lubricating Oil Viscosity on Fuel Economy.” SAE paper 780673
- Lida Y. Tanaka K. Fuse S. “Contact-Point Method for Measuring Sliding Face Temperature and its Application.” SAE paper 830311
- Hoshi M. “Reducing Friction Losses in Automobile Engines.” Trib. Int 17 o 4 Aug. 84 185 189
- Ting L.L. “A Review of Present Information on Piston Ring Tribology.” SAE paper 852355
- Parker D.A. Adams D.R. Barret D.J.S. “The Reduction of Friction in Internal Combustion Engine.” AE Symposium April 1982
- Eilon S. Saunders O.A. “A Study of Piston Ring Lubrication.” Proc. I. Mech. E. 171 427 1957
- De Farro Barros A. Dyson A. “Piston Ring Friction-Rig Measurements with Low Viscosity Oils.” Journal of Inst. of Petr. 46 o 433 Jan. 1960
- Furuhama S. Takiguchi M. “Measurement of Piston Frictional Force in Actual Operating Diesel Engine.” SAE paper 790855
- Furuhama S. Takiguchi M. Tomizawa K. “Effect of Piston and Piston Ring Designs on the Piston Friction Forces in Diesel Engines.” SAE paper 810977
- Furuhama S. Sasaki S. “New Device for the Measurement of Piston Frictional Forces in Small Engines.” SAE paper 831284
- Shin K. Tateishi Y. Furuhama S. “Measurement of Oil-Film Thickness between Piston Ring and Cylinder.” SAE paper 830068
- Furuhama S. Sasaki S. Kojima M. “Piston Friction Force and Piston Ring Oil Film Thickness.” SAE paper 845067
- Furuhama S. Suzuki K. Tateishi Y. “Effect of Friction Modifiers on Decrease in Friction and Wear of Automative Engines.” Proc. Int. Symp. Esslingen FRG Jan 1986 5.3-1 5.3-21
- Thiele E. “Aufteilung der Reibungsverluste von Dieselmotoren.” Schmier. Trib. 25 6 1978
- Krause H.H. “Schmierung, Reibung und Verschleiβ am System Kolben - Ring-Zylinder von Hubkolbenmaschinen.” Schmier. Trib. 29 3 1982
- Thiele E. “Determination of Frictional Losses in Internal-combustion Engines.” MTZ 43 6 1982
- Krause H.H. “Schmierung, Reibung und Verschleiβ am System Kolben - Ring-Zylinder von Hubkolbenmaschinen.” Trib. + Schmier. 32 4 1985
- Thiele E. “Mechanische Reibungsverluste in Hubkolbentriebwerken.” Trib. + Schmier. 33 5 1986
- Krause H.H. “Ein Beitrag zur Optimierung von Reibung, Verschleiβ und Olhaushalt an Kolben-Ring-Zylinder-Systemen.” MTZ 47 1986 4
- Mollenhauer K. Bruchner K. “Contribution to Measuring the Influence of Cylinder Pressure and Engine Speed on Internal Combustion Engine Friction Losses.” MTZ 41 1980 6
- Feuga L. Bury C. “Piston and Ring Mechanical losses.” I.Mech. E./SAE84 IME Paper C449/84 SAE paper 841296
- Richez M.F. Constans B. Winquist K. “Theoretical and Experimental Study of Ring-Liner Friction.” Proc. of Leeds-Lyon Symp. “Tribology of Reciprocating Engines,” Leeds UK Sept. 82
- Cerrato R. Gozzelino R. Ricci R. “A Single Cylinder Engine for Crankshaft Bearings and Piston Friction losses Measurement” I.Mech. E./SAE 1984 IME Paper C426/84 SAE paper 841295
- Uras H.M. Patterson D.J. “Measurement of Piston and Ring Assembly Friction Instantaneous IMEP Method” SAE paper 830416
- Uras H.M. Patterson D.J. “Effect of Some Lubricant and Engine Variables on Instantaneous Piston and Ring Assembly Friction” SAE paper 840178
- Uras H.M. Patterson D.J. “Oil and Ring Effects on Piston-Ring Assembly Friction by the Instantaneous IMEP Method” SAE paper 850440
- Goto T. et al. “Measurement of Piston and Piston Ring Assembly Friction Force” SAE paper 851671
- Rezeka S.F. Henein N.A. “A New Approach to Evaluate Instantaneous Friction and its Components in Internal Combustion Engines” SAE paper 840179
- Hoshi M. Baba Y. “A Study of Piston Friction Force in an Internal Combustion Engine” ASLE Preprint N o : 86-TC-3B-1
- Uras H.M. Patterson D.J. “Effect of Some Piston Variables on Piston and Ring Assembly Friction” SAE paper 870088
- Guichaoua J.L. “Pertes par frottement dans les moteurs et influence du lubrifiant” Pétrole et Techniques Nov. 1980
- Stewart R.M. Selby T.W. “The Relationship between Oil Viscosity and Engine Performance. A Literature Search” SAE paper 770372
- “The Relationship between High Temperature Oil Rheology and Engine Operation”
- Moore S.L. “Piston Ring Oil Film Thickness - The Effect of Viscosity” SAE paper 850439