This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Compact, Comprehensive Model of Large Turbocharged, Two-Stroke Diesel Engines
Annotation ability available
Sector:
Language:
English
Abstract
The model described here is a dynamic mean value model which is small enough to be realized on a microcomputer. Nevertheless it contains significant and very accurate information on the gross internal variables of an engine (the indicated efficiency, scavenge ratio, scavenge efficiency, etc.). This makes the model useful for control and expert system application on line and/or in parallel with an operating diesel engine. Moreover, because of its simplicity, it gives an overall picture of engine operation which is not possible with more complex single engine cycle models. Comparisons with time dependent experimental data show that the model is very accurate both for static and dynamic predictions of engine performance over a large operating range.
Recommended Content
Technical Paper | Supercharged two stroke cycle diesels |
Technical Paper | The Analysis of Mean value Engine Models |
Authors
Citation
Hendricks, E., "A Compact, Comprehensive Model of Large Turbocharged, Two-Stroke Diesel Engines," SAE Technical Paper 861190, 1986, https://doi.org/10.4271/861190.Also In
References
- Streit, E. E. Bowmen, G. L. “Mathematical Simulation of a Large Two-Stroke Diesel Engine” SAE Technical Paper, 710176 1971
- Watson, N. Marzouk, M. “A Non-Linear Digital Simulation of Turbocharged Diesel Engines Under Transient Conditions” SAE Technical Paper, 770123 1977
- Winterbone, D. E. Loo, W. Y. “A Dynamic Simulation of a Two-Stroke Turbocharged Diesel Engine” SAE Technical Paper, 810337 1981
- Watson, N. “Transient Performance Simulation and Analysis of Turbocharged Diesel Engines” SAE Technical Paper, 810338 1981
- Watson, N. “Dynamic Turbocharged Diesel Engines Simulator for Electronic Control System Development” Journal of Dynamic Systems, Measurement and Control 106 Transactions of the ASME 1984
- Blanke, M. Andersen, J. S. “On Modelling Large Two-Stroke Diesel Engines: New Results from Identification” IFAC 9th World Congress Budapest. Hungary 1984
- Wellstead, P. E. Thiruarooran, C. Winterbone, D. E. “Identification of a Turbo-Charged Diesel Engine” Control of Cars and Engines 1984
- Shamsl, S. S. “Development of a Real-Time Digital Computer Simulation of a Turbocharged Diesel Engine” SAE Technical Paper, 800521 1980
- Hendricks, E. Blenke, M. Andersen, T. S. “On Modelling Large Two-Stroke Diesel Engine” Internal Report. Servolaboratory The Danish Technical University Lyngby, Denmark 1984
- Pedersen, P. S. “Process Simulations” The Motor Ship (Supplement) Dec. 1982
- Hendricks, E. Poulsen, N. Joensen, H. “Minimum Energy Control of Large Diesel Engines” SAE Off-Highway and Powerplant Congress Mllwalkee WI, U. S. A. 1986
- Winkler, G. Steady-State and Dynamic Modelling of Englne-Turbomachinery Systems University of Bath Bath, England 1977
- Arbol, S. Forbraendlngsmotorens arbejdsproces , Teknisk Forlag, (In Danish) Copenhagen, Denmark 1965
- Benson, R. Ledger, J. D. Whltestone, N. D. “Comparison of Experimental and Simulated Responses of a Turbocharged Diesel Engine” SAE Technical Paper, 730666 1973
- Taylor, C.F. Taylor, E. S. The Internal-Combustion Engine International Textbook Company Scranton, PA, U. S. A. 1970
- Benson, R. S. Whitehouse, N. D. Internal Combustion Engines 1 and 2 Pergamon Press, Ldt. Oxford, England 1979
- Andersen, T. E. On Dynamics of Large Ship Diesel Engines Control Engineering Laboratory. The Danish Technical University Lyngby, Denmark 1974
- Sorenson, S. C. Winkler, G. Private communications 1986
- Brieghel-Muller, E. Private communication 1986
- Zinner, K. Supercharging of Internal Combustion Engines , Springer Verlag New York, NY 1978
- Kwakernaak, H. Slvan, R. Linear Optimal Control Systems Wiley-Interscience New York, NY, U. S. A. 1972
- Hendricks, E. Hoist, J. Poulsen, N. Joensen, H. “Adaptive Minimum Energy Control of Large Diesel Engines” 2nd IFAC Workshop on Adaptive Systems in Control and Signal Processing Processing Proceedings Lund. Sweden 1986