This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Zinc-Manganese Alloy Electroplated Steel for Automotive Body
Annotation ability available
Sector:
Language:
English
Abstract
Zinc-manganese alloy electroplated has been developed for automotive body panel applications. The product is manufactured on a conventional electrogalvanizing line using an electrolyte containing zinc sulfate, manganese sulfate and sodium citrate. Electroplated steel with an alloy content of 30-50% manganese exhibits excellent corrosion resistance both as-produced and after painting. Zinc-manganese coatings also show good workability and voidability. Accordingly, this product is suitable for both unexposed parts and the interior surfaces of exposed parts. Finally, zinc-manganese electroplated steel displays good wet adhesion and anti-cratering characteristics so that the product can also be used for exposed applications as automotive body panels.
Authors
Topic
Citation
Sagiyama, M., Urakawa, T., Adaniya, T., and Hara, T., "Zinc-Manganese Alloy Electroplated Steel for Automotive Body," SAE Technical Paper 860268, 1986, https://doi.org/10.4271/860268.Also In
References
- Watanabe T. Ohmura M. Honma T. Adaniya T. “Iron-Zinc Alloy Electroplated Steel for Automotive Body Panels” SAE Paper 840424
- Adaniya T. Hara H. Sagiyama M. Honma T. Watanabe T. “Zinc-Iron Alloy Electroplating on Strip Steel” Plating & Surf. Finish August 52 56 1985
- Adaniya T. Sagiyama M. Honma T. “Phase Composition and Properties of Electrodeposited Zn-Fe Alloy” Nippon Kokan Technical Report Overseas No. 43 33 39 1985
- Toda M. Kojima H. Morishita T. Kanamaru T. Arai T. “Development of Two-Layered Zn-Fe Alloy Electroplated Steel Sheet-Sew Coated Steel Sheet for Automotive Body” SAE Paper 840212
- Kojima H. Yamamoto T. Ito K. Fujiwara T. Kanamaru T. “Properties of Zn-Fe Alloy Electroplated Steel Sheets” SAE Paper 840214
- Shibuya A. Kurimoto T. Hoboh Y. Usuki N. “Development of Ni-Zn Alloy Plated Steel Sheet” Trans. ISIJ 23 11 923 929 1983
- Saito T. Wake R. Oka J. Kitayama M. “Development and Properties of Zn-Ni Alloy Electroplated Steel Sheet” Seitetsu Kenkyu 315 6 15 1984
- Shindo Y. Oka J. Yoneno M. Ejiraa M. Yamada A. “Development and Properties of Organic composite-Coated Steel Sheet” Seitetsu Kenkyu 315 25 33
- Yamashita M. Enatsu A. Adaniya T. Hara T. “Organic Composite-Coated Steel for Automotive Body with High Corrosion Resistance” Tetsu∼to-Haganè 69 13 S1103 1983
- Tsugawa S. Mohri T. Kobayashi S. Ichida T. “Newly-Developed Organic Composite-Coated Steel Sheet with High Perforation Corrosion Resistance” SAE Paper 850004
- Brenner A. “Electrodeposition of Alloys vol. II” Academic Press New York and London 1963
- Okado A. Urakawa T. Tsuchiya Y. Fukuda Y. Terasaka S. Sagiyama M. Adaniya T. to be published
- Brandes E.A. “Smithells Metals Reference Book 6th ed.” Butterworth & Co. Ltd. 1983
- Raub E. Müller K. “Fundamentals of Metal Deposition” Elsevier Publishing Company Amsterdam-London-New York 1967
- Shima Y. Terasaka S. Nakaoka K. Honma T. “Structure of Electrodeposited Zinc-Iron Alloys” Tetsu-to-Hagane 71 2 A113
- Feinknecht W. Chem. and Ind. 1102 1959
- Miyoshi Y. Oka J. Maeda S. “Fundamental Research on Corrosion Resistance of Precoated Steel Sheets for Automobiles” Trans ISIJ 23 11 974 983 1983
- Funke W. “Blistering of Paint Films and Filiform Corrosion” Progress in Organic Coatings 9 29 46 1981
- Adaniya T. Hara T. Sagiyama M. Watanabe T. Honma T. “Corrosion Resistance of Zinc-Iron Alloy Electroplated Steel” Presented at International Conference on Surface Modifications and Coatings ASM Toronto, Ontario, Canada October 1985
- Maeda S. Asal T. Okada H. “Factors that Control Paint Adhesion of Coated Metals on Water Immersion Test” Corrosion Engineering (Boshoku Gijutsu) 31 268 274 1982
- Urakawa T. Sagiyama M. Adaniya T. Hara T. to be published