This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Historical Review of the Evolution of Farm Tractors, Earth moving Machines, and Concurrent Evolution of Safety and Operator Rollover Protection
Annotation ability available
Sector:
Language:
English
Abstract
The evolution of farm tractors had its beginning at the turn of the century. The designs were limited by the preference of purchasers who made their buying decisions motivated by profit making ability. Each new generation of tractors included safety features, but these virtues were disguised and advertised as productivity improvements.
Earthmoving and material handling machines came into existence after World War II to displace the practice of adapting farm tractors. A whole new industry was created to meet the demand for immense construction and logging machines. The purchasers of these machines were employers who made their buying decisions based upon a different perspective than the former buyer-user farm tractor buyers.
Regulations and requirements pertaining to safety became a part of the logging and construction industries in the latter part of the 1960's. Regional producers came into being to provide safety devices that met these requirements. Federal regulations were promulgated in 1972, which provided uniformity of requirements and facilitated mass production of machines with standard safety features. However, pre-1969 machines were exempted and because of tractor and machine durability there still exist many machines that are not under the umbrella of regulations and consequently are lacking protective features.
Until an absolutely safe machine is produced, continued efforts are needed to stimulate the purchase of safety features and motivate the use of the devices.
Recommended Content
Technical Paper | Halogen Sealed Beam Headlamps |
Technical Paper | Update of SPC Process on Automatic Fastener Installations |
Aerospace Standard | UxS Control Segment (UCS) Architecture: UCTRACE |
Topic
Citation
Jackson, W., "A Historical Review of the Evolution of Farm Tractors, Earth moving Machines, and Concurrent Evolution of Safety and Operator Rollover Protection," SAE Technical Paper 851498, 1985, https://doi.org/10.4271/851498.Also In
References
- Military Specifications and Standards “Human Engineering Requirements for Military Systems, Equipment and Facilities” MIL-H-46855B January 1979
- “Reliability Program for Systems and Equipment, Development and Production” MIL-STD-758A March 1980
- “System Safety Program Requirements” MIL-STD-882A June 1977
- “Definition of Effectiveness Terms for Reliability, Maintainability, Human Factors and Safety” MIL-STD-721
- Federal Specifications “Loaders, Scoop Type, Four-Wheel Drive, Pneumatic Tired” Interim KKK-L-001542 October 1969 April 1970
- Interim KKK-L-001542A July 1971 October 1972 August 1973
- KKK-L-001542B November 1973 KKK-L-001542C February 1983
- “Tractor, Full-Tracked, Low Speed (Diesel-Engine-Driven” KKK-T-631E January 1980
- American National Standard Institute “Specifications for Accident Prevention Tags” 1968
- “Safety Standards for Powered Industrial Trucks” 1975
- “Powered Industrial Trucks” NFPA 505 1978
- Leach, Gordon L. “Product Safety Check List” Management Aids for Small Manufacturers U.S. Small Business Administration
- Society of Automotive Engineers
- “Minimum Performance Criteria for Roll-Over Protective Structures”
- “for Prime Movers” November 1967
- “for Wheeled Front-End Loaders and Dozers” July 1969
- “for Track Type Tractors and Front-End Loaders” July 1969
- “Critical Zone for Laboratory Evaluation of ROPS and FOPS of Construction and Industrial Vehicles” July 1969
- “Safety Considerations for the Operator” January 1970
- “Safety for Agricultural Equipment” July 1970
- “Protective Frame Test Procedures and Performance Requirements” July 1970
- “Operator Protection for Wheel Type Agricultural and Industrial Tractors” July 1970
- “Protective Enclosures - Test Procedures and Performance Requirements” July 1970
- “Terminology - Construction and Industrial Machinery” June 1964
- “Center of Gravity Test Code” February 1968
- “Rollover Protective Structure for Wheeled Agricultural Tractors” June 1977
- “Categories of Off-Road Self-Propelled Work Machines” July 1975
- “Identification Terminology of Earthmoving Machines” July 1973
- “Performance Criteria for Roll-Over Protective Structures for Construction, Earthmoving, Forestry and Mining Machines” April 1979
- “Operator Protection for Industrial Equipment” April 1980
- “Safety for Industrial Wheeled Equipment” December 1980
- “Operator Cab Environment for Heated, Ventilated and Air Conditioned Construction and Industrial Equipment” April 1976
- American Society of Agricultural Engineers
- “Protective Frame Performance Requirements” 1967
- “Safety for Agricultural Equipment” 1968
- “Improving Safety on Farm Implements” 1964
- “Operator Protection for Agricultural and Light Industrial Tractors” 1967
- “Providing Safety on Wheel and Track Laying Tractors When Used for Agricultural Applications” 1964
- Peters, George A. “The Art of Risk Prevention” Hazard Prevention Journal May/June 1983 System Safety Society
- McCormick, E. J. Human Factors in Engineering and Design McGraw-Hill Book Co. 1976
- Woodson, W. E. Human Factors Design Handbook
- Nichols, H. L. Jr. Moving the Earth North Castle Books Second 1962
- Michigan Farmer July 6 1968 “Unpopular Lifesavers: Roll Bars”
- Woodward Associates I July 15 1974 (Under contract for U.S. Department of Labor) Study to Determine The Engineering and Economic Feasibility of Retrofitting ROPS on Pre-July 1, 1969 Construction Equipments
- Secretary of Transportation Report to Congress January 1971 Agricultural Tractor Safety on Public Roads and Farms
- Iowa State University, Cooperative Extension Service March 1969 Operating Farm Tractors and Machinery
- Clyde, A. W. “Mechanics of Farm Machinery” Professor of Agricultural Engineering, Pennsylvania State College Farm Implement News
- John Deere Co. “Fundamentals of Machine Operation” Agricultural Machinery Safety
- Construction Industry Manufacturers Association Safety Manual for Operating and Maintenance Personnel Crawler Tractors/Wheeled Loaders
- Lhatka, Donald C. “The Seat Belt Story” Traffic Safety November 1964
- Code of Federal Regulations
- 29 Labor
- Part 1926 Safety and Health Regulation for Construction
- Part 1928 Safety and Health Regulation for Agriculture
- Part 1975 Coverage of Employees Under the Williams-Steiger Occupational Safety and Health Act of 1970
- Subpart R Special Industries
- Part 1910.266 Pulpwood Logging
- 30 Mineral Resources
- Part 55 (1975) and (1982) Health and Safety Standards - Metal and Non-Metal Open Pit Mines
- Part 56 (1975) and (1982) Health and Safety Standards - Sand, Gravel and Crushed Stone Operations
- Ringham, Rodger F. Sullivan, H. D. Rollover Protective Structures and Overhead Protection December 13 1971 Comments and recommendations of International Harvester Company on 29 CFR Part 1518
- Corps of Engineers Safety Requirement Manual March 1967
- State of California Safety Orders of California - Industrial Section Construction Safety Orders
- State of Washington Safety Standards for Logging Operations
- State of Oregon Safety Code for Places of Employment
- National Safety Council
- Accident Prevention Manual for Industrial Operations 5th 1967
- Accident Prevention Manual for Industrial Operations 7th 1977
- Tractor Operation and Anti-Roll Bars 1966
- Farm Tractor Safety 1978
- Tractor Operation and Roll Over Protective Structures 1978
- Front End Loaders 1966
- Tractor Operation and Protective Frames 1967
- Tractor Operation and Rollover Protective Structures 1972
- Shapiro, P. P. “How Front End Loader Operators Become Casualties” National Safety News September 1969
- Pynnone, R. O. “Lessons From Some Recent Front-End Loader Accidents” National Safety Council 1965
- Hansen, M. Roll Guards For Tractors SAE 660583 1966
- Close, G. L. Engineering Basics of Protective Structures SAE 690569 1969
- Staab, J. Development of ROPS Criteria for Construction and Industrial Vehicles SAE 719693 1971
- Prosek, J. R. SAE Role in ROPS Criteria and Continued Development SAE 800936 1980
- Arndt, J. F. Rollover Protective Structures for Farm and Construction Tractors - A 50 Year Review SAE 710508 1971
- Woodward, J. L. Swan S. ROPS Field Performance - A Status Report SAE 800679 1980
- Ross, Bernard DiMartino, Michael “Rollover Protective Structures - Their History” Professional Safety May 1982
- Lockie, Daniel A. “The ROPS Saga: OSHA Says Rollovers Must Be Safe” Machine Design March 21 1974
- MacCollum, D. V. “Lessons from 25 Years of ROPS” Professional Safety January 1984
- Hansen, M. “The Evolution of Tractor Design and Safety Features on Farm Tractors” Report to U.S. Department of Transportation & National Highway Safety Bureau A-95 September 12 1970
- Howard, Charles W. Results of Tractor Canopy Tests September 1968
- Chitwood, J. N. Graham, J. Study and Evaluation of Tractor Canopies in Rollover Accidents Corps of Engineers March 1958
- Stevenson, D. L. Gustin, W. E. Development of Protective Frames and Cab, Recommended Practice for Agricultural and Light Industrial Tractors in the United States 1968
- Contractors and Engineers Spotlight on Safety July 1972
- E & R Development Company, Redding, California Tractor Canopy Impact Tests July 1956
- University of California - Davis, Agricultural Extension Service Driver Safety Frames 1957
- de Stwolinski, L. W. A Survey of the Safety Environment of the Construction Industry Technical Report No. 114 October 1969 Department of Civil Engineering, Stanford University
- American Society of Agricultural Engineers Symposium Tractor Roll Bars , Winter Meeting December 13 1962
- National Swedish Testing Institute Tractor Safety Cabs, Test Methods and Experience Gained During Ordinary Farm Work 1962
- Radian Corp. Safety information Profile, Mobile Earthmoving Equipment - Non-Mining National for Institute for Occupational Safety and Health (NIOSH), U.S. Department of Commerce, National Technical Information Service April 1969
- Mine Enforcement Safety Administration (MESA) Analysis of Fatal Accidents Involving Front End Loaders at Metal and Non-Metal Mines Information Report IR 1019 U.S. Department of Interior 1975
- Society of Automotive Engineers A Historical Perspective of Farm Machinery SP-470 September 1980
- McKinley, Marvin Wheels of Farm Progress American Society of Agricultural Engineers 1980
- Gray, R. B. The Agricultural Tractor, 1855-1950 American Society of Agricultural Engineers
- Larsen, Lester Farm Tractors, 1950-1975 American Society of Agricultural Engineers
- McKibben, E. G. The Kinematics and Dynamics of the Wheel Type Farm Tractor Research in Agricultural Engineering, I through VII 1927