This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Performance and Combustion Modeling of Heterogeneous Charge Engines
Annotation ability available
Sector:
Language:
English
Abstract
This paper reviews the phenomoneological modeling of the combustion processes for the diesel and fuel-injected stratified charge engines. Distinctions are made between phenomenological and multi-dimensional finite-difference approaches. The modeling methodologies and the basic components in these models are described. These include characterization of the fuel spray, fuel-air mixing, ignition, burning and heat transfer processes. An attempt is made in the paper to highlight the similarities and contrasts of various models and relate to their utility in addressing emission research and engine performance development objectives.
Recommended Content
Citation
Primus, R. and Wong, V., "Performance and Combustion Modeling of Heterogeneous Charge Engines," SAE Technical Paper 850343, 1985, https://doi.org/10.4271/850343.Also In
References
- Rivard, W. C. Farmer, O. A. Butler, I. D. “RICE: A Computer Program for Multi-Component Chemically Reactive Flows at All Speeds” Los Alamos Scientific Laboratories Report LA-5812 1975
- Bracco, F. V. Gupta, H. C. Krishnamurtly, L. Santavicca, D. A. Steinberger R. L. Warshaw, V. “Two-Phase Two-Dimensional Unsteady Combustion in Internal Combustion Engines: Preliminary Theoretical — Experimental Results” SAE Paper 760114 1976
- Westbrook, C. K. “Three-Dimensional Numerical Modeling of Liquid Fuel Sprays” XVI Symposium International on Combustion Cambridge 1976
- Bracco, F. V. “Modeling of Two-Phase, Two-Dimensional Unsteady Combustion for Internal Combustion Engines” I. Mech. E. Paper C171-177 167 1977
- Gorman, A. D. Johns, R. J. R. “Development of a Predictive Tool for In-cylinder Gas Motion in Engines” SAE Paper 780315 1978
- Haselman, L. C. Westbrook, C. K. “A Theoretical Model for Two-Phase Fuel Injection in Stratified Charge Engines” SAE Paper 780318 1978
- Butler, T. D. Cloutman, L. D. Dukowicz, J. K. Ramshaw, “CONCHAS: An Arbitrary Lagrangian-Eulerian Computer Code for Hulti-component Chemically Reactive Fluid Flow at All Speeds” Los Alamos Scientific Laboratories Report LA-8129-MS 1979
- Butler, T. D. Cloutman, L. D. Dukowicz, J. K. Ramshaw, J. D. Krieger, R. B. “ Toward a Comprehensive Model for Combustion in a Direct-Injection Stratified-Charged Engine” Combustion Modeling in Reciprocating Engines 231 Mattavi J. N. Amann C. A. Plenum Press 1980
- Gorman, A. D. Johns, R. J. R. Watkins, A. P. “Development of Prediction Methods for In-Cylinder Processes in Reciprocating Engines” Combustion Modeling in. Reciprocating Engines 69 Mattari J. N. Amann, C. A. Plenum Press 1980
- Diwakar, R. “Multidimensional Modeling Applied to the Direct-Injection Stratified-Charge Engine Calculation Versus Experiment” SAE Paper 810225 1981
- McAulay, K. J. Wu, I. Chen, S. K. Borman, G. L. Myers, P. S. Uyehara, O. A. “Development and Evaluation of the Simulation of the Compression-Ignition Engine” SAE Paper 650451 1965
- Benson, R. S. “A Comprehensive Digital Computer Program to Simulate a Compression Ignition Engine Including Intake and Exhaust Systems” SAE Paper 710173 1971
- Mizushima, K. Nagai, M. Asada, T. “Some Analyses of Diesel Engine Performance by Means of Computer Simulation” J. MES J. 1 5 35 1972
- Garg, R. D. Agarwal, K. K. Desikachari, R. “Computer Simulation of a Diesel Engine” IE (India) Journal ME 55 67 1974
- Watson, N. Marzouk, M. “A Non-Linear Digital Simulation of Turbocharged Diesel Engine Simulation” SAE Paper 770123 1977
- Winterbone, D. E. Loo, W. V. “A Dynamic Simulation of a Two-Stroke Turbocharged Diesel Engine” SAE Paper 810337 1981
- Austen, A. E. Lyn, W. T. “Relation Between Fuel Injection and Heat Release in a Direct-Injection Engine and The Nature of the Combustion Processes” I. Mech. E. 1960
- Lyn, W. T. “Study of the Burning Rate and Nature of Combustion in Diesel Engines” Ninth (International) Symposium on Combustion 1962
- Shipinski, J. Uyehara, O. A. Myers, P. S. “Experimental Correlation Between Rate-of-Injection and Rate-of-Heat Release in a Diesel Engine” ASME Paper 68-DGP-11 1968
- Woschni, G. Anisits, F. “Experimental Investigation and Mathematical Presentation of Rate of Heat Release in Diesel Engines Dependent Upon Engine Operating Conditions” SAE Paper 740086 1974
- Watson, N. Pilley, A. D. Marzouk, M. “A Combustion Correlation for Diesel Engine Simulation” SAE Paper 800029 1980
- Grigg, H. C. Syed, M. H. “The Problem of Predicting Rate of Heat Release in Diesel Engines” Symp. on Diesel Engine Combustion London 1970
- Whitehouse, N. D. Way, R. J. B. “A Simple Method for the Calculation of Heat Release Rates in Diesel Engines Based on the Fuel Injection Rate” SAE Paper 710134 1971
- Whitehouse, N. D. Sareen, B. K. “Prediction of Heat Release in a Quiescent Chamber Diesel Engine Allowing for Fuel/Air Mixing” SAE Paper 740084 1974
- Whitehouse, N. D. Baluswamy, N. “Calculation of Gaseous Products of Combustion in a Diesel Engine Using a Four-Zone Model” SAE Paper 770410 1977
- Kau, C. J. Heap, M. P. Tyson, T. J. Wilson R. P. “The Prediction of Nitric Oxide Formation in a Direct Injection Diesel Engine” Combustion Institute, 16th Int. Symp. p. 337 1976
- Bastress, E. K. Chng, K. M. Dix, D. M. “Models of Combustion and Nitric Oxide Formation in Direct and Indirect Injection Compression Ignition Engines” SAE Paper 719053 1971
- Hiroyasu, H. Kadota, T. Arai, M. “Development and Use of a Spray Combustion Modeling to predict Diesel Engine Efficiency and Pollutant Emissions (Part I Combustion Modeling)” Bulletin of the JSME 26 214 1983
- Hiroyasu, H. Kadota, T. “Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines” SAE Paper 760129 1976
- Dent, J. C. Mehta, P. S. “Phenomenological Combustion Model for a Quiescent Chamber Diesel Engine” SAE Paper 822135 1981
- Shahed, S. M. Chiu, W. S. Lyn, W. T. “A Mathematical Model of Diesel Combustion” I. Mech. E. Conference on Combustion in Engines, Cranfield 1975
- Blizard, N. C. Keck, J. C. “Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engines” SAE Paper 740191 1974
- Meguerdichian, M. Watson, N. “Prediction of Mixture Formation and Heat Release in Diesel Engines” SAE Paper 780225 1978
- Chapman, M. Friedman, M. C. Aghan, A. “A Time-Dependent Spatial Model for Radiant Heat Transfer in Diesel Engines” SAE Paper 831725 1983
- Blumberg, P. Kummer, J. K. “Prediction of NO Formation in Spark-Ignition Engines — An Analysis of Methods of Control” Combustion Sci., and Tech. 4 73 1971
- Hires, S. D. Ekchian, J. A. Heywood, J. B. Tabaczynski, R. J. Wall, J. C. “Performance and NOx Emissions Modeling of a Jet Ignition Prechamber Stratified Charge Engine” SAE Paper 760161 1976
- Jain, B. C. Rife, J. M. Keck, J. C. “A Performance Model for the Texaco Controlled Combustion Stratified Charge Engine” SAE Paper 760116 1976
- Mansouri, S. H. Heywood, J. B. Radhakrishnan, K. “Divided Chamber Diesel Engine, Part I: A Cycle Simulation Which Predicts Performance and Emissions” SAE Paper 820273 1982
- Wall, J. C. Heywood, J. B. Woods, W. A. “Parametric Studies of Performance and NOx Emissions of the Three-Valve Stratified Charge Engine Using a Cycle Simulation” SAE Paper 780320 1978
- Hiraki, H. Rife, J. M. “Performance and NOx Model of a Direct Injection Stratified Charge Engine” SAE Paper 800050 1980
- Chigier, N. A. “The Atomization and Burning of Liquid Fuel Sprays” Progress in Energy and Combustion Science 2 97 1976
- Natarajan, R. “Combustion of Fuel Droplets in Oxidizing Atmospheres” Journal of the Aeronautical Society of India 23 125 1971
- Newman, J. A. Brzustowski, T. A. “Behavior of a Liquid Jet Near the Thermodynamic Critical Region” AIAA Journal 9 1595 1971
- Natarajan, R. “A Shadowgraphic Investigation of High Pressure Droplet Vaporization” Combustion and Flame 26 407 1976
- Altenkirch, R. A. Shahed, S. M. Sawyer, R. F. “Nitric Oxide Formation Around Droplets Burning at Elevated Pressures” Combustion Science & Technology 5 147 1972
- McCreath, C. G. Chigier, N. A. “Liquid Spray Burning in Wake of a Stabilizer Disc” XIV Symposium (International) on Combustion 1972
- Onuma, Y. Ogarawara, M. “Studies on the Structure of a Spray Combustion Flame” XV Symposium (International) on Combustion 453 1974
- Onuma, Y. Ogarawara, M. Inoue, T. “Further Experiments on the Structure of a Spray Combustion Flame” XVI Symposium (International) on Combustion 561 1976
- Adler, D. Lyn, W. T. “The Evaporation and Mixing of a Liquid Fuel Spray in a Diesel Air Swirl” Proc. I. Mech. E. 171 1970
- Kuo, T. W. Yu, R. C. Shahed, S. H. “A Numerical Study of the Transient Evaporating Spray Mixing Process in the Diesel Environment” SAE Paper 831735 1983
- Shipinski, J. H. Myers, P. S. Uyehara “A Spray-Droplet Model for Diesel Combustion” Proc. I. Mech. E. 28 1970
- Igura, S. Kadota, T. Hiroyasu, H. “Spontaneous Ignition Delay of Fuel Sprays in High Pressure Gaseous Environments” Trans. Japan soc. Mech. Engrs. 41 345 1970
- Hiroyasu, H. Kadota, T. Senda, T. Imamoto, T. “Evaporation of a Single Droplet at Elevated Pressures and Temperatures (Experimental Study)” Trans JSME 40 3147 1974
- Kadota, T. Hiroyasu, H. Oya, H. “Spontaneous Ignition Delay of a Fuel Droplet in High Pressure and High Temperature Gaseous Environments” Trans. Japan Soc. Mech. Eng. 41 348 1975
- Shroff, H. D. “The Simulation and Optimization of the Thermodynamic Processes of a Diesel Engine” SAE Paper 740194 1974
- Khan, I. M. Greeves, G. “A Method of Calculating Emissions of Soot and Nitric Oxide from Diesel Engines” SAE Paper 730169 1973
- Chiu, W. S. Shahed, S. M. Lyn, W. T. “A Transient Spray Mixing Model for Diesel Combustion” SAE Paper 760128 1976
- Kadota, T. Hiroyasu, H. “Evaporation of a Single Droplet at Elevated Pressures and Temperatures (Theoretical study)” Trans. JSME 42 356 1216 1976
- Dent, J. C. Salama, N. S. “The Measurement of Turbulence Characateristics in an I.C. Engine Cylinder” SAE Paper 750886 1975
- Lancaster, D. R. “Effects of Engine Variables on Turbulence in a SI Engine” SAE 760159 1976
- Witze, P. O. “Measurements of the Spatial Distribution and Engine Speed Dependence of Turbulent Air Motion in an IC Engine” SAE 770220 1977
- Tippelman, G. “A New Method of Investigation of Swirl Ports” SAE Paper 770404 1977
- Tindall, M. J. Williams, T. J. “An Investigation of Cylinder Gas Motion in the DI Diesel Engine” SAE Paper 770405 1977
- Jagadeesan, T. R. Murthy, B. S. “Study of Air Motion in a Compression Ignition Engine Cylinder” SAE Paper 770406 1977
- Ohigashi, S. Hamamoto, Y. Tanabe, S. “New Digital Method for Measuring Gas Flow Velocity By Electric Discharge” SAE Paper 690180 1969
- Chen, L. L. Myers, P. S. Uyehara, O. A. “Air Velocity Measurements in Engines by Vortex Shedding” SAE Paper 741057 1974
- Wigley, G. Hawkins, M. “Three Dimensional Velocity Measurements by Laser Anemometry in a Diesel Engine Cylinder Under Steady State Inlet Mow Conditions” SAE Paper 780060 1978
- Flagan, R. C. Appleton, J. P. “A Stochastic Model of Turbulent Mixing with Chemical Reaction: Nitric Oxide Formation in a Plug-Flow Burner” Combustion and Flame 23 249 267 1974
- Dent, J. C. Derham, J. A. “Air Motion in a Four Stroke Direct Injection Diesel Engine” Inst, of Mech. Eng. 1973
- Patrick, M. A. “Experimental Investigation of Mixing and Flow in a Round Turbulent Jet Injected Perpendicularly into a Main Stream” Sheffield University Fuel Soc. Bulletin 1965
- Wolfer, H. H. “Ignition Lag in the Diesel Engine” VDI-Forschungsheft No. 392 1938
- Tsso, K. C. Myers, P. S. Uyehara O. A. “Gas Temperature During Compression in Motored and Fired Diesel Engines“” Trans. SAE 70 1962 136 145
- Bauer, S. G. “Ignition Lag in Compression Ignition Engines” Engineering 148 8 1939 368
- Lyn, W. T. Valdmanis, E. “The Effects of Physical Factors on Ignition Delay”” Papers IME (London) Automotive Division 1966
- Sitkei, G. “Uber den dieselmotorischen Zundverzug” M.T.Z 24 6 190 194 1963
- Henein, N. A. Bolt, J. A. “Correlation of Air Charge Temperature and Ignition Delay for Several Fuels in a Diesel Engine” SAE 690252 1969
- Hardenberg, H. O. Hase, F. W. “An Empirical Formula for Computing the Pressure Rise Delay of a Fuel from Its Cetane Number and from the Relevant Parameters of Direct-Injection Diesel Engines” SAE 790493 1979
- Ilmari, E. J. “The Spray Impingement Theory of Ignition Delay in Small Swirl Chamber Diesel Engines” Ph.D. Thesis, Inst. of Tech., Helsinki 1965
- Kamel, M. Watson, N. “Heat Release and Ignition Delay in an Indirect Injection Diesel Engine” FISITA Conference 1980
- Temple-Pediani, R. W. “The Ignition Delay and Combustion of a Drop Under Pressure on a Hot Surface” SAE Paper 700502 1970
- Wiebe, I. “Halbempirischl Formel Fur die Verbiennugs-geschwindigkeit” verlag der Akademie der Wissenschaften der VdSSR Moscow 1956
- Eichelberg, G. “Some New Investigation of Old Combustion-Engine Problems” Engineering 148 1939
- Pflaum, U. “Heat Transfer in Internal Combustion Engines” Paper presented at Conferenzia Internazionale di Termolernica Milan, Italy 1962
- Sitkei, G. “Contribution to the Theory of Heat Transfer in the Internal Combustion Engine” Translated from Konstruktion 14 67 1962
- Henein, N. A. “Instantaneous Heat Transfer Rates and Coefficients Between the Gas and Combustion Chamber of a Diesel Engine” SAE Paper 969B 1965
- Woschni, G. “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” SAE Paper 670931 1967
- LeFeuvre, T. Myers, P. S. Uyehara, O. A. “Experimental Instantaneous Heat Fluxes in a Diesel Engine and Their Correlation” SAE Paper 690464 1969
- Nusselt, W. “Der Warmenbergang in Verbrennungskraftmaschinen” VDI Forsch-Heft, 264 1923
- Belinskiy, L. M. “Heat Measurements in the Chamber of a High Speed Compression Ignition Engine” Investigation of the Working Processes in a High-Speed Diesel Engine Research Laboratory Mashgiz 1955
- Annand, W. J. D. “Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines” Proceedings of I. Mech. E. 177 973 1963
- Ebersole, G. D. Myers, P. S. Uyehara, O. A. “The Radiant and Convective Components of Diesel Engine Heat Transfer” SAE Paper 701C 1963
- Sitkei, G. Ramanaiah, G. V. “A Rational Approach for Calculation of Heat Transfer in Diesel Engines,” SAE Paper 720027 1972
- Dent, J. C. Sulaiman, S. J. “Convective and Radiative Heat Transfer in DI Diesel Engines,” SAE Paper 770407 1977
- Flynn, P. F. Mizusawa, M. Uyehara, O. A. Myers, P. S. “An Experimental Determination of the Instantaneous Potential Radiant Heat Transfer Within an Operating Diesel Engine” SAE Paper 720022 1972
- Kunimoto, T. Matsuoka, K. Oguri, T. “Prediction of Radiative Heat Flux in a Diesel Engine” SAE Paper 750786 1975
- Chang, S. L. Rhee, K. T. “Computation of Radiation Heat Transfer in Diesel Combustion” SAE Paper 831332 1983
- Bard, S. Pagni, P. J. “Carbon Particulates in Small Pool Fire Flame” ASME Trans. J. of Heat Transfer 103 357 362 1981
- Edward, D. K. Balakrishnan, A. “Thermal Radiation by Combustion Gases” J. of Heat Mass Transfer 16 525 1973
- Newhall, H. K. Shahed, S. M. “Kinetics of Nitric Oxide Formation in High Pressure Flames” XIII Symposium (International) on Combustion 1970
- Tuteja, A. D. “The Formation of Nitric Oxide in Diffusion Flames” PhD Thesis, University of Wisconsin 1972
- Lavole, G. A. Heywood, J. B. Keck, J. C. “Experimental and Theoretical Study of Nitric Oxide Formation in IC Engines” Combustion Science and Technology 1 313 1970
- Williams, T. J. Whitehouse, N. D. “Investigation into Some Aspects of the Computation of Diesel Engine Combustion” Proceeding of I. Mech. E. 1976
- Uyehara, O. A. Rhee, K. T. Myers, P. S. “Time and Space Resolved Species Determination in Diesel Combustion Using Continuous Flow Gas Sampling” SAE Paper 780226 1978
- Khan, I. M. Duggal, V. K Priede, T. “A Study of Pollutant Formation Within the Combustion Space of a Diesel Engine” SAE Paper 780227 1978
- Borman, G. L. Voiculescu, I. A. “An Experimental Study of Diesel Engine Cylinder Averaged NOx Histories” SAE Paper 780228 1978
- Radcliffe, S. W. Appleton, J. P. “Shock Tube Measurement of Carbon to Oxygen Atom Ratios for Incipient Soot Formation with C 2 H 2 , C 2 H 4 and C 2 H 6 Flames” MIT Report 1971
- Crookes, R. J. Janota, M. S. Tau, K. J. “A Study of Soot and Gaseous Pollutant Formation in a Diesel Type Burning Fuel Spray” Combustion Institute European Symposium 1973
- McFarlane, J. J. “Carbon Formation in Premixed Methane Oxygen Flames Under Constant Volume Conditions” Combustion and Flame 14 67 1970
- Cullis, C. F. Hucknall, D. J. Shepherd, J. V. “Studies of Radical Reactions Leading to Carbon Formation” Combustion Institute European Symposium 1973