This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of TS 980MPa Grade Cold-Rolled, High-Strength Steel Sheet with High Ductility
Annotation ability available
Sector:
Language:
English
Abstract
In response to an increasing demand of high strength steel sheets for automobiles, study was carried out to develop TS 980MPa (100kgf/mm2) grade cold rolled dual phase steel sheet which can be used for the manufacturing of, for instance, bumper reinforcement and door impact beams.
First, the process conditions of water-quenching-type continuous annealing were investigated to establish the concepts on the optimum dual phase microstructure which guarantees high strength and good ductility.
Secondly, solution hardening by typical chemical elements: carbon, silicon, manganese and phosphorus, was discussed to find the most beneficial way to maintain good ductility in the strengthening of the steel sheet.
Mill production of the TS 980MPa grade steel sheet proved to have good ductility which now can replace the conventional TS 784MPa grade steel sheet.
Authors
Citation
Tanaka, Y., Shirasawa, H., and Miyahara, M., "Development of TS 980MPa Grade Cold-Rolled, High-Strength Steel Sheet with High Ductility," SAE Technical Paper 850117, 1985, https://doi.org/10.4271/850117.Also In
References
- Rashid M. S. SEA Paper 76020(1 Detroit. Michigan 1976
- Bally D. J. SEA Paper 760715 Dearborn. Michigan 1976
- Fine T. E. et al. SEA Paper 780136 Detroit 1978
- Pradham R. R. Metallurgy of continuous-Annealed Sheet Steel AIME Annual Meeting in Dallas 1982 203 228
- Goodman S. R. Metallurgy of continuous-Annealed Sheet Steel AIME Annual Meeting in Dallas 1982 229 250
- Messien P. Herman J. C. Greday T. Metallurgy of continuous-Annealed Sheet Steel AIME Annual Meeting in Dallas 1982 271 286
- Nakaoka K. Araki K. Kurihara K. Formable HSLA and Dual-Phase Steels TSM-AIME in Chicago Illinois 1977 126 141
- Takade Y. Hosoya Y. Nakaoka K. Metallurgy of continuous-Annealed Sheet Steel AIME Annual Meeting in Dallas 1982 251 270
- Furukawa T. Morikawa H. Takechi H. Koyarma K. Structure and Properties of Dual-Phase Steels AIME Annual Meeting in New Orleans 1979 281 303
- Okamoto A. Nagao N. Takahashi M. Metallurgy of continuous-Annealed Sheet Steel AIME Annual Meeting in Dallas 1982 287 300
- Special G. R. Miller R. L. Structure and Properties of Dual-Phase Steels AIME Annual Meeting in New Orleans 1979 145 182
- Rigsbee J. M. Vanderend P.J. Formable HSLA and Dual-Phase Steels TSM AIME Meeting in Chicago Illinois 1977 56 86
- Takahashi N. Abe M. Akisue O. Katoh H. Metallurgy of continuous-Annealed Sheet Steel AIME Annual Meeting in Dallas 1982 51 98