This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Calculation Model For The Optimization Of A Variable Distribution (Reduction Of The Pump-Losses)
Annotation ability available
Sector:
Language:
English
Abstract
It exists the possibility of adopting variable valve timings to reduce pump-losses in spark-ignition engines. With this method, engine load regulation can be achieved mainly by acting over the total time that the inlet valve remains open, and eliminating the throttle valve in an ideal case. The timing diagram (total opening valve and angular phase) should depend on the engine speed and load desired in each moment.
The mechanical system for the proposed regulation system is a four-bar mechanism which is now in a stage of final adjustment for a monocylinder engine.
In order to get the valve timing, a calculation model for the inlet and exhaust processes has been developed and is presented in this article, as well as the results obtained.
Authors
Topic
Citation
Payri, F., Desantes, J., and Boada, F., "Calculation Model For The Optimization Of A Variable Distribution (Reduction Of The Pump-Losses)," SAE Technical Paper 845065, 1984, https://doi.org/10.4271/845065.Also In
References
- Eyzat M. P. “Amelioration des rendements des moteurs thermiques actuels” Ing. de L'Automobile” Febr. 1977
- Tuttle J. H. “Controlling engine load by means of early intake valve closing” SAE Paper 820408
- Payri F. Desantes J. M. Boada F. “Vías de mejora del rendimiento de los motores térmicos alternativos: Reducción de las pérdidas de bombeo” Energias Alternativas 13 1982
- Payri F. Desantes J. M. Boada F. “Sistema de adquisición de datos para determinar diagramas de indicador” I Coloquio sobre técnicas experimentales e instrumentación, E.T.S.I.I Tarrasa December 1983
- Albertos P. et al “Microprocessor-Based Control of Engine Valve Timing” IEEE Trans. on Industrial Electronics IE-30 2 113 117 1983
- Fuenmayor F. Suarez O. Camarena E. “Synthesis of a Four Bar Mechanism with Variable Parameters. Application to the Total Admition Angle Variation in an Internal Combustion Engine” IFTo MM Congress on Theory of Machines and Mechanisms December 1983
- Benson R. S. “The Thermodynamics and gas Dynamics of Internal Combustion Engines” Oxford Unviersity Press 1983
- Payri F. et al “Aumento de rendimiento de un motor térmico alternativo median te el empleo de una distribución variable. Método de cálculo” Jornadas de Motores Térmicos. Proceso de Renovación de la Carga, E.T.S.I.I Valencia 1982
- Woschni G. “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” . SAE Paper 670931
- McAdams W. H. “Review and Summary of Developments in Heat Transfer by Conduction and Convection” Trans. A.I.Ch.E 36 1940
- Sieder E. N. Tate G. E. “Heat Transfer and Pressure Drop of Liquids in Tubes” Ind. Eng. Chem 28 1936