This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Stress Analysis
Annotation ability available
Sector:
Event:
Fatigue Conference
Language:
English
Abstract
The basic concepts of elastic and inelastic behavior are presented. The elevation of stresses at notches, the stress concentration factor, Kt and fatigue notch factor, Kf, and sources of differences between Kt and Kf are introduced. Inelastic stress-strain response at a notch, Neuber’s rule, residual stresses subsequent to notch yielding, and reduction of stress concentration are discussed.
Recommended Content
Technical Paper | Automotive Body Fatigue Analysis – Inertia Relief or Transient Dynamics? |
Technical Paper | Accounting for Scatter in Strain-Life Fatigue Testing |
Technical Paper | Evaluation of Fatigue Life Regression Models |
Authors
Topic
Citation
Reemsnyder, H., "Stress Analysis," SAE Technical Paper 820683, 1982, https://doi.org/10.4271/820683.Also In
References
- Timoshenko S. MacCullough G. H. 3rd Edition “Elements of Strength of Materials,” D. Van Nostrand and Co. New York 1949
- Popov E. P. “Mechanics of Materials,” Prentice-Hall, Englewood Cliffs N. J. 1952
- Panlilo F. “Elementary Theory of Structural Strength,” John Wiley & Sons New York 1963
- Timoshenko S. Goodier J. N. “Theory of Elasticity,” McGraw-Hill New York 1951
- Sokolnikoff I. S. “Mathematical Theory of Elasticity,” McGraw-Hill New York 1956
- Prager W. Hodge P. G. “Theory of Perfectly Plastic Solids,” John Wiley & Sons New York 1951
- Mendelson A. “Plasticity: Theory and Application,” MacMillan New York 1968
- Neuber H. “Theory of Notch Stresses,” 2nd Edition Springer Berlin 1958
- Savin G. N. “Stress Concentration Around Holes,” Pergamon Press New York 1961
- Peterson R. E. “Stress Concentration Factors,” 2nd Edition John Wiley & Sons New York 1974
- Mowbray D. F. McConnelee J. E. “Applications of Finite Element Stress Analysis and Stress-Strain Properties in Determining Notch Fatigue Specimen Deformation and Life,” “Cyclic Stress-Strain Behavior,” ASTM Philadelphia 1973
- Holister G. S. “Experimental Stress Analysis,” Cambridge University Press Cambridge 1967
- Heywood R. B. “Photoelasticity for Designers,” Pergamon Press New York 1969
- Durelli A. J- Phillips E. A. Tsao C. H. “Introduction to the Theoretical and Experimental Analysis of Stress and Strain,” McGraw-Hill New York 1958
- Corteg, W. V. Brines R. S. George, R. J. “Designing More Durable Automotive Body Structures Using Plastic Models and Damage Analysis,” SAE Paper 790700 , SAE, Warrendale, Pa June 1979
- Heywood R. B “Designing Against Fatigue of Metals,” Reinhold New York 1962
- Peterson R. E. “Stress Concentration Design Factors,” John Wiley & Sons New York 1953
- Krempl, E. “The Influence of State of Stress on Low-Cycle Fatigue of Structural Materials,” STP 549, ASTM, Philadelphia 1974
- Stowell, E. Z. “Stress and Strain Concentration at a Circular Hole in an Infinite Plate,” April 1950
- Neuber, H. “Theory of Stress Concentration for Shear Strained Prismatical Bodies with Arbitrary Non Linear Stress-Strain Law,” Transactions ASME, Journal of Applied Mechanics 38 December 1961 544 550
- Kotani, S. Koibuchi K. Kasai, K. “The Effect of Notches on Cyclic Stress-Strain Behavior and Fatigue Crack Initiation,” Proceedings, 2nd International Conference on Mechanical Behavior of Materials, Boston 1976 606 610
- Peterson R. E. “Notch-Sensitivity,” “Metal Fatigue,” Sines G. Waisman J. L. McGraw-Hill New York 1959
- SAE “Fatigue Design Handbook,” SAE New York 1968 29
- Kuguel, R. “A Relation Between Theoretical Stress Concentration Factor and Fatigue Notch Factor Deduced from the Concept of Highly Stressed Volume,” Proceedings ASTM 61 1961 732 748
- Raske, D. T. “Fatigue Failure Predictions for Plates with Holes and Edge Notches,” Journal of Testing and Evaluation 1 September 1973 394 404
- Heindlhofer K. “Evaluation of Residual Stresses,” McGraw-Hill New York 1948
- Baldwin, W. M. “Residual Stresses in Metals,” Proceedings ASTM 49 1949 539 583
- Treuting, R. G Lynch, J. J. Wishart H. B. Richards, D. G. “Residual Stress Measurements,” American Society for Metals Cleveland 1952
- Osgood W. R. “Residual Stresses in Metals and Metal Construction,” Reinhold New York 1954
- Rassweiler G. M. Grube W. L. “Internal Stresses and Fatigue in Metals,” Elsevier New York 1959
- Alraen J.O. Black P. H. “Residual Stresses and Fatigue in Metals,” McGraw-Hill New York 1963
- Lipson C. Juvinall R. C. “Handbook of Stress and Strength,” McMillan New York 1963
- Fuchs H. O. Stephens, R. I. “Metal Fatigue in Engineering,” Wiley-Interscience New York 1980
- Madayag A. F. “Metal Fatigue: Theory and Design,” John Wiley & Sons New York 1969
- Osgood C. C. “Fatigue Design,” Wiley-Interscience New York 1970
- Collins, J. A. “Failure of Materials in Mechanical Design,” Wiley-Interscience New York 1981