This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Heat Transfer and Stress Analyses of Engine Heads and Evaluation of Methods of Preventing Head Cracks
Annotation ability available
Sector:
Language:
English
Abstract
The problem of engine head thermal stresses which may cause its cracking is discussed in both quantitative terms and in the methods of crack circumvention. It is pointed out that in the present state of the art only scarce knowledge exists on thermal boundary conditions in both the combustion chamber and in the coolant side. Effective relieving schemes include cylinders decoupling and introduction of thermal barriers. The need is pointed out for further research in augmentation of heat transfer schemes on the coolant side.
Recommended Content
| Technical Paper | Heat Transfer/Thermal Analysis for Cylinder Head |
| Technical Paper | Effect of Coolant Type on Engine Operating Temperatures |
Authors
Citation
Blech, J., "Heat Transfer and Stress Analyses of Engine Heads and Evaluation of Methods of Preventing Head Cracks," SAE Technical Paper 820504, 1982, https://doi.org/10.4271/820504.Also In
References
- Fitzgeorge D. Pope, J.A. “An Investigation of the Factors Contributing to the Failure of Diesel Engine Pistons and Cylinder Covers” Trans. N.E. Coast Institute of Engin. and Shipbuilders 71 1955 163 236
- Dearden: A. Residual Thermal Stresses in Compression Ignition Engines” B.C.I.R.A.- E1 1961 9 (july) p. 540
- Irmler: C. Wärmespannungen in Zylinderköpfen von Viertakt-Dieselmotoren” VDI-Forschungsheft 495 B 29 1963
- Bertodo R. Carter: T.J. “Stress Analysis of Diesel Engine Cylinder Heads” J. of Strain Analysis 6 1 1971 1 12
- Kama: R. “Adiabatic Turbocompound Engine Performance Prediction” SAE Trans. Sec 1 87 1978 213 223
- Stang: J.H. “Designing Adiabatic Engine Components” SAE Technical Paper No. 780069 1978
- Eichelberg: G. “Some New Investigations on Old Combustion-Engine Problems” Engineering 148 1939
- Seale W.J. Taylor: D.H.C. “Spatial Variation of Heat Transfer to Pistons and Liners of Some Medium Speed Diesel Engines” Proc. Instn. Mech. Eng4s 185 17/71 1970–71 203 218
- Annand: W.J.D. “Heat Transfer in the Cylinders of Reciprocating INternal Combustion Engines” Proc. Inst. Mech. Engrs. 177 36 1963 973 990
- Brock E. K. et al. “The Precition of Diesel Engine Performance and Combustion Chamber Component Temperatures using Digital Computers” Proc. Instn. Mech. Engrs. 182 (Pt3L) 1967–68
- Woschni: G. “Die Berechnung der Wandverluste und der termischen Belastung der Bauteile vor Dieselmotroen” MTZ 31 1970 120 491 499
- French: C.C.J. “Taking the Heat off teh Highly Boosted Diesel” SAE 690463 1969
- Pattas: K. “Thermische Belastung des Zylinderkopfes von Hockleistungs-Dieselmotroen” MTZ 35 10 1974 314 318
- McAdams W. H. “Heat Transmission” McGraw-Hill Third Edition 1954
- Smith, L.W.L. Angus H.T. Lamb: A.D. “Cracking in Cast Iron Diesel Engine Cylinder Heads” Proc. Instn. Mech. Engrs. 185 58/71 807 823 D317 D319
- Moore, C.N. Hohenstein H.L. Gehres: E. “Heat Transfer and Engine Cooling - Aluminum vs. Cast Iron” SAE 494E 1962
- Gehres E. “An Analysis of Engine Cooling in Modern Passenger Cars” SAE 660c 1963
- Roshenow W.M. Hartnett J.P. “Handbook of Heat Transfer” McGraw-Hill 1973