This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Electromagnetic Compatibility Recommendations for Electric Vehicles
Annotation ability available
Sector:
Language:
English
Abstract
This paper provides an overview of electromagnetic compatibility considerations between battery powered, automotive type, electric vehicles and other electrical and electronic services. A brief historical background is provided along with a review of test data and available standards. The paper recommends that despite procedural difficulties, SAE J551 should be used to measure and compare electromagnetic radiation from electric vehicles. Similarly, SAE J1113 should be used to measure electromagnetic susceptibility. The paper also recommends that acceptable procedures for determining electromagnetic compatibility of electric vehicles and other services be more fully developed.
Recommended Content
Technical Paper | 240 VDC Electric Vehicle System |
Technical Paper | Development of a Hybrid Electric Vehicle for the US Marine Corps |
Authors
Citation
McBrien, E., "Electromagnetic Compatibility Recommendations for Electric Vehicles," SAE Technical Paper 820402, 1982, https://doi.org/10.4271/820402.Also In
References
- Society of Automotive Engineers Inc. “Electromagnetic Susceptibility Procedures for Vehicle Components (Except Aircraft) -SAE J1113a.” 1981 SAE Handbook
- Bauer F. Doty, A. C. “The Search for a Truly International Radio Frequency Interference Standard.” SAE Paper 800015 presented at the SAE Congress and Exposition, Detroit 1980
- Society of Automotive Engineers Inc. “Limits and Methods of Measurement of Radio Interference Characteristics of Vehicles and Devices (20 - 1000 MHz) - SAE-J551 Jun 79.” 1981 SAE Handbook
- Dowgiallo, E. J. Bailey, C. E. Snellings, I. R. Blake W. H. Sherwood, D. “Baseline Tests of the EVA Metro Electric Passenger Vehicle.” United States Department of Energy report number CONS/0421-1. May 1978
- Reimers, E. “EVA Metro Sedan Electric Propulsion System - Test and Evaluation.” United States Department of Energy report DOE/CS/1042-1 1979
- Department of Defense “Electromagnetic Interference Characteristics Requirements for Equipment.” MIL-STD-461A 1968
- Corporate Research and Development of the General Electric Company “Near Term Electric Vehicle Phase II Final Report.” SRD-79-076 General Electric Company, Schenectady New York 1980
- Southern California Edison Co. “EPRI/SCE Testing and Evaluation of Electric Work Vehicles: Jet 500, Volkswagen Type 2, Daug Type GM2, and Battronic Minivan.” Electric Power Research Institute report EM-1245 1979
- The Institute of Electrical and Electronic Engineers Inc. “Standard for Measurement of Radio Noise Generated by Motor Vehicles and Affecting Mobile Communications Receivers in the Frequency Range 25 to 1000 Megacycles per Second.” IEEE STD 263 1965
- Society of Automotive Engineers Inc. “Electric Vehicle Test Procedure - SAE J227a” 1981 SAE Handbook
- The Institute of Electrical and Electronic Engineers Inc. “IEEE Standard Dictionary of Electrical and Electronics Terms.” ANSI/IEEE STD 100-1977, John Wiley & Sons Inc.