The Effect of Fuel Injection Rate and Timing on the Physical, Chemical, and Biological Character of Particulate Emissions from a Direct Injection Diesel

Authors

• J. Campbell - Michigan Technological Univ.
• J. Scholl - Michigan Technological Univ.
• F. Hibbler - Michigan Technological Univ.
• S. Bagley - Michigan Technological Univ.
• D. Leddy - Michigan Technological Univ.
• D. Abata - Michigan Technological Univ.
• John H. Johnson - Michigan Technological Univ.

Topic

• Particulate matter (PM)
• Fuel injection
• Chemicals
• Combustion and combustion processes
• Biological sciences

Citation

Also In

References

1. Jambekar A. B. Johnson J. H. “The Effect of Dieselization on Truck Usage,” SAE Paper No. 810022 1981
2. “Standard for Emissions of Particulate Regulation for Diesel-Fueled Light-Duty Vehicles and Light-Duty Trucks,” Federal Register Vol. 45 45 14496 14525 March 5 1980
3. “Control of Air Pollution from New Motor Vehicle Engines; Particulate Regulation for Heavy-Duty Diesel Engines,” Federal Register 46 4 1910 1967 January 7 1981
4. Barth D. J. Blacker S. M. “The EPA Program to Assess the Public Health Significances of Diesel Emissions,” JAPCA 28 8 769 1978
5. Vuk C. T. Jones M. A. Johnson J. H. “The Measurement and Analysis of the Physical Character of Diesel Particulate Emissions,” SAE Paper No. 760131 , SAE Transactions 85 1976
6. Truex T. J. Pierson W. R. McKee D. E. “Sulfate in Diesel Exhaust,” Environment al Science and Technology 14 1118 1980
7. Hunter G. Scholl J. Hibbler F. Bagley S. Leddy D. Abata D. Johnson J. “The Effect of an Oxidation Catalyst on the Physical, Chemical, and Biological Character of Diesel Particulate Emissions,” SAE Paper No. 810263 , SAE special publication SP-484 1981
8. Broome D. Khan I. M. “The Mechanism of Soot Release from Combustion of Hydrocarbon Fuels with Particular Reference to the Diesel Engine,” Institute of Mechanical Engineers, paper C-140 1971
9. Amann C. A. Stivender D. L. Plee S. L. MacDonald J. S. “Some Rudiments of Diesel Particulate Emissions,” SAE Paper No. 800251 , SAE special publication P-86 1980
10. Khan I. M. Wang C. H. T. “Factors Affecting Emissions of Smoke and Gaseous Pollutants from Direct Injection Engines,” Instn. Mech. Engrs. paper C151 1971
11. Watson N. Pilley A. D. Marzouk M. “A Combustion Correlation for Diesel Simulation,” SAE Paper No. 800029 , SAE special publication P-86 1980
12. Uyehara O. A. “Diesel Combustion Temperature on Soot,” SAE Paper No. 800969 , SAE special publication SP-468 1980
13. Hiroyasu H. Arai M. Nakaniski N. “Soot Formation and Oxidation in Diesel Engines,” SAE Paper No. 800252 , SAE special publication P-86 1980
14. Aoyagi Y. Kamimoto T. Matsui Y. Matsuoka S. “A Gas Sampling Study on the Formation Processes of Soot and NO in a DI Diesel Engine,” SAE Paper No. 800254 , SAE special publication P-86 1980
15. Porter G. “The Mechanism of Carbon Formation,” Combustion Research and Reviews -AGARDOGRAPH 9 AGARD 1955
16. Khan I. M. Greeves G. Wang C. H. T. “Factors Affecting Smoke and Gaseous Emissions from a Direct Injection Engine and Method of Calculation,” SAE Paper No. 780169 , SAE Transactions 82 1973
17. Uyehara O. A. “Effect of Burning Zone A/F, Fuel H/C on Soot Formation and Thermal Efficiency,” SAE Paper No. 800252 , SAE special publication P-86 1980
18. Khan I. M. “Formation and Combustion of Carbon in a Diesel Engine,” Symposium on Diesel Engine Combustion Processes, Instn. Mech. Engrs. paper 184, (Pt 3J) 1969-1970
19. Dent J. C. “Turbulent Mixing Rate -Its Effect on Smoke and Hydrocarbon Emissions from Diesel Engines,” SAE Paper No. 800092 , SAE special publication P-86 1980
20. Greeves G. Khan I. M. Wang C. H. T. Fenne I. “Origins of Hydrocarbon Emissions from Diesel Engines,” SAE Paper No. 770259 , SAE Transactions 86 1977
21. Yu R. C. Wong V. W. Shahed S. M. “Sources of Hydrocarbon Emissions from Direct Injection Diesel Engines,” SAE Paper No. 800048 1980
22. Mayer W. J. Lechman D. C. Hilden D. L. “The Contribution of Engine Oil to Diesel Exhaust Particulate Emissions,” SAE Paper No. 800256 , SAE special publication P-86 1980
23. Greeves G. Wang C. H. T. “Origins of Diesel Particulate Mass Emissions,” SAE Paper No. 810260 , SAE special publication SP-484 1981
24. Zeldovich Y. B. Sadovnikov P. Y. Frank-Kamenetski D. A. “Oxidation of Nitrogen in Combustion,” Academy of Sciences, USSR, Moscow-Leningrad 1947
25. Newhall H. K. Shahed S. M. “Kinetics of Nitrogen Oxide Formation in High Pressure Flame,” Paper presented at 13th Symposium on Combustion, The Combustion Institute 1971
26. Khan I. M. Greeves G. Probert D. M. “Predictions of Soot and Nitric Oxide Concentrations in Diesel Engine Exhaust,” Symposium on Pollution Control in Transport Engines, Instn. Mech. Engrs London 1971
27. Caretto L. S. Muzio L. J. Sawyer R. F. Starkman E. S. “The Role of Kinetics in Engine Emission of Nitrogen Oxide,” Combustion Science Technology 3 2 1961
28. Nightingale D. R. “A Fundamental Investigation into the Problem of NO Formation in Diesel Engines,” SAE Paper No. 810022 , SAE Transactions 84 1975
29. Whitehouse N. D. Clough E. Uhunmwangho S. O. “The Development of Some Gaseous Products during Diesel Engine Combustion,” SAE Paper No. 800028 , SAE special publication P-86 1980
30. Shahed S. M. Chiu W. S. Yumlu V. S. “A Preliminary Model for the Formation of Nitric, Oxide in Direct Injection Diesel Engines and Its Application to Parametric Studies,” SAE Paper No. 730083 , SAE Transactions 82 1973
31. Hiroyasu H. Kadota T. “Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines,” SAE Paper No. 760129 , SAE Transactions 85 1976
32. Khan I. M. Wang C. H. T. Longridge B. E. “Effects of Air Swirl on Smoke and Gaseous Emissions from Direct Injection Diesel Engines,” SAE Paper No. 770102, SAE Transactions 81 1972
33. British Department of Employment “Threshold Limit Values for 1971,” H. M. Factory Inspectorate Technical Note 2 1971
34. Pitts J. N. Jr. Van Cauwen-berghe K. A. Grosjean D. Schmidt J. P. Fritz D. R. Belsen W. L. Jr. Knudson G. B. Hynds P. M. “Atmospheric Reactions of Polycyclic Aromatic Hydrocarbons: Facile Formation of Mutagenic Nitro Derivatives,” Science 202, 5/5 1978
35. Hillard J. C. Wheeler R. W. “Nitrogen Dioxide in Engine Exhaust,” SAE Paper No. 790691 , SAE Transactions 88 1979
36. Henein N. A. Patterson D. S. Emissions from Combustion Engines and Their Control, Chapter 8 - Diesel Combustion Emissions and Their Control Ann Arbor Science Publishers 1972
37. Burman P. G. DeLuca F. Fuel Injection and Controls for Internal Combustion Engines, Library of Congress Catalog Card Number: 62-12020, American Bosch Arma Corporation 1962
38. Hinze J. O. “Critical Speeds and Sizes of Liquid Globules,” Appl. Sci. Res. Al 1949
39. Greeves G. “Response of Diesel Combustion Systems to Increase of Fuel Injection Rate,” SAE Paper No. 790037 1979
40. Schweitzer P. H. “Penetration of Oil Sprays,” Bulletin No. 46, Engineering Experiment Station, Pennsylvania State College 1937
41. Parke M. V. Polonski C. Toye R. “Penetration of Diesel Fuel Sprays in Gases,” SAE Paper No. 660747 1976
42. Shahed S. M. Flynn P. F. Lyn W. T. “A Model for the Formation of Emissions in a Direct Injection Diesel Engine,” General Motors Symposium on Combustion Modeling in Reciprocating Engines, Plenum Press, New York 1978
43. Brysik W. Smith C. O. “Relationships Between Exhaust Smoke and Operating Variables in Diesel Engines,” SAE Paper No. 770718 , SAE Transactions 86 1977
44. Carpenter K. A. “The Design and Development of a Dilution Tunnel for the Physical and Chemical Characterization of Diesel Particulate Material,” M.S. Thesis, Michigan Technological University 1979
45. Khatri N. J. Johnson J. H. Leddy D. G. “The Characterization of the Hydrocarbon and Sulfate Fractions of Diesel Particulate Matter,” SAE Paper No. 780111 , SAE Transactions 87 1978
46. Huisingh J. Bradow R. Jungers R. Claxton L. Zweidinger R. Tejada S. Bum-garner J. Duffield F. Waters M. Simmon V. F. Hare C. Rodriguez C. Snow L. “Application of a Mutagenicity Bioassay to Monitoring Light-Duty Diesel Particulate Emissions,” Presented at the Symposium on Application of Short-Term Bioassays in the Fractionation and Analysis of Complex Environmental Mixtures, Williamsburg 1978
47. Funkenbusch E. F. Leddy D. G. Johnson J. H. “The Characterization of the Soluble Organic Fraction of Diesel Particulate Matter,” SAE Paper No. 79418, SAE Transactions” 88 1979
48. Ames B. N. McCann J. Yamasa-ki E. “Methods of Detecting Carcinogens and Mutagens with the Salmonella /Mamma1ian-Microsomal Mutagenicity Test,” Mutat. Res. 33 374 1975
49. Wei E. T. Wang Y. Y. Rappa-port S. M. “Diesel Emissions and the Ames Test: A Commentary,” J. Air Poll. Control Assoc. 30 267 1980
50. Kido H. Wakuri Y. Ono S. Murase E. “Prediction of In-Cylinder Gas Motion in Engines by an Energy. Method,” SAE Paper No. 800985 , SAE special publication SP-468 1980
51. Allen J. R. Learn J. M. “REGAN 2: A Multiple Linear Regression Analysis,” Academic Computing Center, University of Wisconsin - Madison 1971
52. Stull D. R. Prophet H. et al “JANAF Thermochemical Tables” Second Edition NSRDS-NBS 37, National Bureau of Standards 1971
53. Personal communication, J. Kimberly, American Bosch Diesel Products 1980
54. Kuniyashi H. Tanabe H. Takeshi Sato G. Fujimoto H. “Investigation on Characteristics of Diesel Fuel Spray,” SAE Paper 800968 , SAE special publication SP-468 1980

Cited By