This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Glass Fibre-Reinforced Plastics in European Passenger Cars Requirements and Applications
Annotation ability available
Sector:
Language:
English
Abstract
Over the last decade an unstable situation in the energy and raw material sectors has had a no-ticable influence on the use of plastics in European automotive engineering. New approaches to the raw material and energy situation indicated that plastics would be the materials of the future. It became clear that plastomers, duromers and elastomers can be used not only for the body and external components but also for parts subjected to heavy mechanical stresses.
This paper discusses the extent to which light-weight constructions using composite materials are realistic and whether high polymers can help to save energy to the extent dictated by economic requirements or whether the step from proven technical feasibility to high-volume production constitutes a stumbling block.
There are many examples showing that glass fibre and carbon fibre reinforced high polymers, in both solid and foamed form, can be very successfully put to use.
Authors
Topic
Citation
Johnke, K., "Glass Fibre-Reinforced Plastics in European Passenger Cars Requirements and Applications," SAE Technical Paper 810742, 1981, https://doi.org/10.4271/810742.Also In
References
- Haferkamp H. Ehrenstein G.-W. “Torsionsmessungen an glasfaserverstarkten Kunststoffen” Schiff und Hafen, H. 9, S. 867 1969
- Luz E. “Gedämpfte Schwingungen konti-nuierlicher Gebilde bei Annahme eines nichtline-aren Stoffgesetzes” Dissertation TH Stuttgart 1966
- Oberst H. “Schwingungsdämpfende Kunst-stoffe aus optimal eingestellten Polymeren” Kolloid-Zeitschrift und Zeitschrift fur Polymere, Band 216 bis 217, 64 1967
- Schulz A.B. Warwick D.N. “Vibration Response: A Non-Destructive Test for Fatique Crack Damage in Filament-Reinforced Composites” Journal of Composite Materials 5 394 1971
- Di Benedetto A.T. Gauchel J.V Thomas R.L. Barlow J.W. “Non-Destructive Determination of Fatique Crack Damage in Composites using Vibration Tests” Journal of Materials 7 211 1972
- Menges G. Hesselt F. Vordruck zum 4. Kunststofftechnischen Rolloquium des IKV Aachen 1968 Plastverarbeiter
- Johnke K.-D. “Untersuchungen an glasfaser verstärkten Kunststoffen mittels Biegeschwingungs-versuch” Unveröffentlichte Forschungsarbeit - TU Hannover
- Bergmann L. “Der Ultraschall” Auflage Stuttgart S. Hinzel-Verlag 1949
- Houwink R. Stavermann A.J. “Chemie und Technologie der Kunststoffe” Band 3, Kap. 9.1 und 9.2, 4. Auflage Leipzig: Akademische Verlagsgesell-schaft 1964
- Puck A. “Zum Deformationsverhalten und Bruchmechanisraus von unidirektionalem und orthogo-nalem Glasfaser Kunststoff” Kunststoffe 55 1965 Nr. 12, S. 913/22
- Johnke K.-D. Behr P. “Kunststoffe im Automobilbau unter Berucksichtigung sicherheits-technischer Aspekte” Teil 1 - “Hochpolymere bei der Innenausstattung von Fahrzeugen”; ATZ 82 1980
- Hablitzel H. Johnke K.-D. “New pressures and alternative plastics” Plastics for external car components; VDI-Verlage GmbH, Düssel-dorf 1980
- Johnke K.-D. Behr P. “Kunststoffe im Automobilbau unter Berucksichtigung sicherheitstech-nischer Aspekte” Teil 2 - “Hochpolymere für AulSen-teile im Automobilbau”; ATZ 82 1980
- Johnke K.-D. “Kunststoffe auch als Auto-mobil-Außenteile” Korrosionsgefa'hrdete Stellen der Karosserie werden besser geschützt; 1. Teil, VDI-Wachrichten, Jahrgang 34, Nr. 12 1980
- Hablitzel H. Johnke K.-D. “The use of Plastics on European cars - an Update” SAE-Paper 800813 SAE-Passenger Car Meeting Dearborn 1980
- McLeod D.G. “Grundsatzuntersuchungen für KarosserieauBenteile des ” Rabbit Pick-up”. VWoA-Engineering 1980
- Hablitzel H. Johnke K.-D. “Der Leicht-bau bestinant die Werkstoffauswahl” Im Automobilbau substituieren Kunststoffe immer häufiger herkömm-liche Materialmen; VDI-Nachrichten, Jahrgang 34, Nr. 42 1980
- Schäper S. “Grundsatzuntersuchungen an einem großflächigen Karosserieteil für den “Audi Quattro”. Audi-Technische Entwicklung” 1980