This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Aerodynamic Surface Cooling for Laminar Flow Control for Hydrogen-Fueled Subsonic Aircraft
Annotation ability available
Sector:
Language:
English
Abstract
Cryogenic-fueled aircraft offer an excellent potential for laminar flow control by use of the sensible heat of the stored fuel to cool aerodynamic surfaces. Cooling the boundary layer below adiabatic wall conditions delays transition to the turbulent region and reduces frictional drag. For the liquid hydrogen fuel case, preliminary design calculations, using gaseous nitrogen as the coolant, will result in a 20-percent reduction in fuel requirement (wings plus nacelles cooling) to 28-percent reduction (addition of fuselage cooling) for a M = 0.85 cruise wide body-type aircraft on a 12,000-km flight. The added costs associated with liquefying hydrogen for use as a fuel can be offset by the improved flight performance (and lower operating costs). Implementation of surface cooling increases aircraft dry weight through addition of heat exchangers, pumps, control subsystems, etc. These must be factored into aircraft performance to realistically evaluate fuel savings. Also, assessment of the cool down cycle is a nontrivial problem because of the large variability in local heating rates and temperatures which must be evaluated in conjunction with structural and operational constraints. Results of a preliminary study of a conceptual cooling system for the M = 0.85, 12,000-km range aircraft are presented and potential problem areas discussed. Cooling of wing and nacelle surfaces appears feasible and within the current state of technology.
Recommended Content
Authors
Citation
Cunnington, G. and Parmley, R., "Aerodynamic Surface Cooling for Laminar Flow Control for Hydrogen-Fueled Subsonic Aircraft," SAE Technical Paper 801155, 1980, https://doi.org/10.4271/801155.Also In
References
- Brewer G. D. Morris R. E. Lange R. H. Moore J. W. “Study of the Application of Hydrogen Fuel to Long-Range Subsonic Transport Aircraft.” NASA CR-132559 January 1975
- Brewer G. D. “LH 2 Aircraft Requirements Study.” NASA CR-2700 March 1976
- Witcofski R. D. “Alternate Aircraft Fuels Prospects and Operational Implications.” NASA TMS 74036 May 1977
- Mikolowsky W. T. Noggle L. W. Stanley W. L. “The Military Utility of Very Large Airplanes and Alternative Fuels.” Astronautics and Aeronautics 15 9 September 1977
- Brewer G. D. et al. “Study of Fuel Systems for LH 2 Fueled Subsonic Transport Aircraft.” NASA CR-145369 July 1978
- Brewer G. D. et al. “Study of Methane Fuel for Subsonic Transport Aircraft.” Final Report, Contract NASI-15239 1980
- Leeds L. “The Stability of the Laminar Boundary Layer in a Compressible Fluid.” NACA Report 876 1947
- Reshotko E. “Drag Reduction by Cooling in Hydrogen Fueled Aircraft.” Congress of International Council for the Aeronautical Sciences (ICAS) Lisbon, Portugal September 1978
- Touloukian Y. S. Ho C. Y. “Thermophysical Properties of Selected Aerospace Materials.” Purdue University West Lafayette, Indiana October 1976
- American Society of Heating, Refrigerating and Air-Conditioning Engineers “Handbook of Fundamentals.” ASHRAE New York 1967
- Schlicting H. “Boundary Layer Theory.” McGraw-Hill New York 1960
- Kays W. M. London A. L. “Compact Heat Exchangers.” 2nd McGraw-Hill New York 1964