This content is not included in your SAE MOBILUS subscription, or you are not logged in.
The Use of Plastics on European Cars–an Update
Annotation ability available
Sector:
Language:
English
Abstract
In recent years thanks to the continuous improvements in production techniques the use of high polymers - plastomers, duromers, elastomers - has found ever-increasing justification in automobile design in Europe. The improved comfort of vehicle interiors, the reduction in weight of the automobiles and the associated energy savings, which the use of such materials guarantees, will continue to remain powerful sales arguments favouring the use of plastics despite the recent price increases.
The revised situation in the energy and raw material sectors, coupled with the growing desire for comfort and simpler operation, as well as new safety and statutory regulations, have forced the motor industry to consider the use of a wider range of materials. Most of the plastics used at the moment can be found inside the vehicle. Future percentage growth rates in the high polymer field will, however, be concentrated on those plastics which will find use in the coachwork and external car components. This will lead to reductions in the weight of the cars themselves and contribute towards reducing the number of parts subject to corrosion.
It is also clear that use of plastics does not always result in a reduction of vehicle weight, but nevertheless represents the best potential solution to a problem in terms of the minimum proportion of weight.
For the future, however, plastics demonstrate far more important properties than simply that of being lighter than other materials. They are being increasingly used today in automobile design for other reasons.
Recommended Content
| Journal Article | Development of Bio-Based Plastics for Injection Molding |
| Technical Paper | Weight Reduction with Sandwich Material on Front End Carrier Application |
| Technical Paper | Painting Today's Thermoplastic Olefins |
Authors
Citation
Hablitzel, H. and Johnke, K., "The Use of Plastics on European Cars–an Update," SAE Technical Paper 800813, 1980, https://doi.org/10.4271/800813.Also In
References
- Hablitzel H., “The Plastic Fuel Tank for the VW-Passat.” SAE-Paper 740 289.
- Hablitzel H., “Plastics in the Automobile Industry in Europe.” SAE-Paper 760 173.
- Kannebley G., “Glasfaserverstärkte Duromere für den Automobilbau.” Kunststoffberater, Heft 1 (1978).
- Kusik A., “Die Anwendung von Kunststoffen.” VDI-Z 121 (1979) Nr. 3.
- Diament A., “Vorgefertigte Dachhimmel.” Kunststoffe bei der Innenausstattung von Fahrzeugen; VDI-Verlag GmbH, Düsseldorf.
- Giugiaro G., “Zukunftsgedanken zum Gestalten der Inneneinrichtung.” Kunststoffe bei der Innenausstattung von Fahrzeugen; VDI-Verlag GmbH, Düsseldorf 1979.
- Schriever H., “Verkleidungsteile aus holzmehlgefülltem Polypropylen.” Kunststoffe bei der Innenausstattung von Fahrzeugen; VDI-Verlag GmbH, Düsseldorf 1979.
- K.-D. Johnke, “Kunststoffe erhöhen Fahrzeugkomfort.” VDI-Nachrichten, Jahrgang 33, Nr. 12, 1979.
- H. Hablitzel and K.-D. Johnke, “Interior Use of Plastics on European Automobiles.” Plastics: The Answer to Transportation in the 80's; SPE-NATEC, Detroit 1979.
- Hablitzel H., “Gewichtseinsparung im Automobil durch Einsatz von Kunststoffen.” Automobil-Industrie (1979) Heft 4.
- K.-D. Johnke and P. Behr, “Kunststoffe im Automobilbau unter Berücksichtigung sicher-heitstechnischer Aspekte.” Teil 1 - “Hochpolymere bei der Innenausstattung von Fahrzeugen.” ATZ 82 (1980) Heft 1.
- Hablitzel H. and Johnke K.-D., “Die neuen Zwänge und die Alternative Kunststoff.” Kunststoffe für Außenteile im Automobilbau; VDI-Verlag GmbH, Düsseldorf 1980.
- K.-D. Johnke and P. Behr, “Kunststoffe im Automobilbau unter Berücksichtigung sicher-heitstechnischer As pekte.”, Teil 2 - “Hochpolymere für Außenteile im Automobilbau.” ATZ 82 (1980) Heft 3.