This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Metal Stamping Presses Noise Investigation and Abatement
Annotation ability available
Sector:
Language:
English
Abstract
Noise generating mechanisms connected with steel-blanking operation has been identified and their engineering treatments developed and tested. Use of rubber-metal laminates proved to be successful for cushioning impacts in kinematic pairs and joints. Use of plastic for the stripper plate construction was recommended. The “die stiffener” concept was developed to reduce main noise peak associated with punch breakthrough. Screening of the die cavity by a transparent curtain of overlapping PVC strips was shown to be effective. A pulse load simulator with adjustable load rate and amplitude has been developed to facilitate testing of presses.
Recommended Content
Authors
Citation
Rivin, E. and Shmuter, S., "Metal Stamping Presses Noise Investigation and Abatement," SAE Technical Paper 800495, 1980, https://doi.org/10.4271/800495.Also In
References
- Rivin E. “Noise Abatement of Vibration-Stimulated Material Handling Equipment” Proceedings of Noise-Con 79 Purdue University 1979
- Loo M. Rivin, E. “Noise Abatement of Sliding Chutes for Metal Stamping Production” SAE Paper 800493
- Huang B. Rivin, E. “Noise Abatement of In-Plant Trailers” SAE Paper 800494
- The Quiet Press Manufacturing Engineering February 1979
- Quiet Giant Stamping Press Metal Fabricating News March–April 1979
- The Fine-Blanking News American Feintool, Inc. 1976
- Saaek M. M. Tobias S. A. “Research on Noise Generated in Impact Forming Machines at the University of Birmingham” Int. Conf. Forging Noise Control Atlanta, GA October 1976
- Osman, A. Knight W. Sadek, M. “Determination of Dynamic Characteristics of an Impact Forming Machine Structure” Transactions of ASME 100 November 1978
- Osman, A. Sadek, M. Knight, W. “Noise and Vibration Analysis of an Impact Forming Machine” Journal of Engineering for Industry February 1974
- Vajpayee S. Sadek, M. “Effects of Structural and Forming Parameters on the Efficiency of Energy Transfer in Impact Forming Machines” Journal of Engineering for Industry May 1978
- “Investigation of Sound Radiation from Mechanical Press Structures” Anatrol Corporation Cincinnati, Ohio August 1978
- Shinaishin O. A. “On Punch Press Diagnostics and Noise Control” Inter-Noise 72 Conference Proceedings Washington, DC October 1972
- Shinaishin, O. “Impact-Induced Industrial Noise” Noise Control Engineering 2 30 36 1974
- Koss L. “Vibrational Analysis of a Punch Press” Noise, Shock, and Vibration Conference Melbourne 1974
- Rechlin B. Humbent G. “Noise Reduction of Forming Machines, Illustrated by Forge Hammers” Hannover University Germany March 1974
- Koss L. Alfredson, R. “Identification of Transient Sound Sources on a Punch Press” Journal of Sound and Vibration 34 1 1974
- Sahlin S. “Origins of Punch Press Noise” Inter-Noise 74 Conference Proceedings Washington, DC October 1974
- Koss, L. “Damping of Punch Press Vibrations” Noise Control Engineering 13 No. 1 July 1979
- Ecker W. Rotthaus D. “Arbeitskraft und Schallabstrahlung von Pressen und Hämmern” Metall. 27 Juni 1973
- Hoffman, H. “Possibilities for Noise Reduction on Mechanical Blanking Presses” Sheet Metal Industries May 1973
- Stewart V. Daggerhart J. Bailey J. “Identification and Reduction of Punch Press Noise” Inter-Noise 74 Conference Washington, DC October 1973
- Stewart, N. Bailey J. Daggerhart, J. “Study of Parameters Influencing Punch Press Noise” Noise Control Engineering September–October 1975
- Ghee, K. “Punch Press Noise Characteristics” Sheet Metal. Industries October 1978
- Korytko, M. “Damping High-Pressure Low-Flow Energy Instantaneously” Hydraulics and Pneumatics April 1978
- Boip, T. A. “Snap-Through Arrestor for High Speed Blanking Presses” Paper by E. W. Bliss Division, Presented to Ford Motor Company World wide Stamping Conference April 1978
- Bramberger C. “Noise Reduction at Punch Presses by Means of Shock Absorber” Noise-Con 79 Purdue University Indiana
- Koss, L. “Punch Press Load-Radiation Characteristics” Noise Control Engineering January 1977
- Engstrom, J. “Noise Reduction by Covers” Noise Control 1 2 1955
- Allen C. Ison, R. “A Practical Approach to Punch Press Quieting” Noise Control Engineering July 1974
- Bruce R. D. “A Review of Noise and Vibration Control for Impact Machines,” Inter-Noise 72 Conference Proceedings Washington, DC October 1972
- Richards I. I. “A Review of Manipulative Machinery Noise Source Mechanisms” I. Mech. E. 1977
- Rivin E. I. Gus’atinskaya N. S. “Experimental Investigation of Static Characteristics of Thin Layer Rubber-Metal Laminates” “Antyvibratzionnye Elementy dlya Technolo-gitcheskogo oborudovanya” Anti-vibration Elements for Production Machinery Moscow 1974
- Harris C. M. Crede C. E. “Shock and Vibration Handbook” 2nd Edition McGraw-Hill Book Company N.Y.
- Freakley P. K. Payne, A. R. “Theory and Practice of Engineering with Rubber” Applied Science Publishers, Ltd. London 1978