This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study on the Selection of High Strength Steel Sheets for Auto-Body Panels
Annotation ability available
Sector:
Language:
English
Abstract
In search for thinner auto-body panels, investigation has been made on the level of yield strength of high strength steel sheets in view of the fact that the dent resistance must be at least equal to that of today's mild steel panels. Dent resistance should be evaluated for slight dent, and loss of the dent resistance caused by thinning is most remarkably seen in this case. Rephosphorized aluminum killed steel with bake-hardenability is most favourable, taking the necessary resistance to slight dent and the formability into consideration.
Recommended Content
Citation
Kojima, M. and Hayashi, Y., "A Study on the Selection of High Strength Steel Sheets for Auto-Body Panels," SAE Technical Paper 800369, 1980, https://doi.org/10.4271/800369.Also In
References
- Timoshenko S. “Theory of Plates and Shells.” McGRAW HILL BOOK COMPANY 1959
- DiCello J. A. George R. A. “Design Criteria for the Dent Resistance of Auto Body Panels.” Paper 740081 presented at SAE Automotive Engineering Congress 1974