This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Schlieren Visualization of the Flow and Density Fields in the Cylinder of a Spark-Ignition Engine
Annotation ability available
Sector:
Language:
English
Abstract
The design and operating characteristics of a single-cylinder transparent spark-ignition engine for Schlieren flow visualization are described. The engine is built on a CFR engine crankcase using the CFR piston and cylinder as a crosshead for the square cross-section piston and cylinder assembly. The square cross-section assembly has two parallel steel walls and two parallel quartz glass walls to permit optical access to the entire cylinder volume over the complete engine operating cycle. The CFR head and valve mechanism completes the assembly. It is shown that the engine operates satisfactorily with propane fuel under typical engine operating conditions.
Schlieren short time-exposure photographs and high speed movies were taken to define details of the flow and density fields through the engine cycle. Photographs which illustrate key features of these fields are presented and described. Important features identified are: Jet flow through the intake valve; large scale rotating motion in the cylinder during intake and compression; details of ignition, flame kernel development, flame structure, flame propagation; the extent of cycle-by-cycle variations; flow out of the crevices behind and beneath the piston rings during expansion; flow out of the spark plug crevice, and boundary layer entrainment during blowdown; the growth of the vortex in the piston cylinder-wall corner during the exhaust stroke; thermal boundary layer thicknesses.
Recommended Content
Technical Paper | Nodular cast iron pistons for Medium Duty Applications |
Technical Paper | Measurement of Piston and Piston Ring Assembly Friction Force |
Technical Paper | HVOF Cermet Coatings for High Horse Power Diesel Engines |
Authors
- M. Namazian - Sloan Automotive Laboratory, Massachusetts Institute of Technology, Cambridge, MA
- S. Hansen - Sloan Automotive Laboratory, Massachusetts Institute of Technology, Cambridge, MA
- E. Lyford-Pike - Sloan Automotive Laboratory, Massachusetts Institute of Technology, Cambridge, MA
- J. Sanchez-Barsse - Sloan Automotive Laboratory, Massachusetts Institute of Technology, Cambridge, MA
- John B. Heywood - Sloan Automotive Laboratory, Massachusetts Institute of Technology, Cambridge, MA
- J. Rife - Sloan Automotive Laboratory, Massachusetts Institute of Technology, Cambridge, MA
Topic
Citation
Namazian, M., Hansen, S., Lyford-Pike, E., Sanchez-Barsse, J. et al., "Schlieren Visualization of the Flow and Density Fields in the Cylinder of a Spark-Ignition Engine," SAE Technical Paper 800044, 1980, https://doi.org/10.4271/800044.Also In
References
- Rassweiler, G.M. Withrow, L. “Motion Pictures of Engine Flames Correlated with Pressure Cards” SAE Transactions 42 No. 5 1938
- Nakanishi, K. Hirano, T. Inoue, T. Ohigashi, S. “The Effects of Charge Dilution on Combustion and Its Improvement -- Flame Photograph Study” SAE Paper 750054 , SAE Transactions 84 352 1975
- Alcock, J.F. Scott, W.M. “Some More Light on Diesel Combustion” Proc. Inst. Mech. Engrs. (A.D.) No. 5 179 200 1962–63
- Taylor, C.F. Taylor, E.S. Livengood, J.C. Russel, W.A. Leary, W.A. “The Ignition of Fuels by Rapid Compression” paper presented at the SAE Annual Meeting, Detroit, Michigan January 9–13 1950
- Matekunas, F.A. “A Schlieren Study of Combustion in a Rapid Compression Machine Simulating the Spark Ignition Engine”, S” eventeenth Symposium (International) on Combustion 1283 1978
- Oppenheim, A.K. Chong, R.K. Teichman, K. Smith, O.T. Sawyer, R.F. Hom, K. Stewart, H.E. “A Cinematographic Study of Combustion in an Enclosure Fitted with a Reciprocating Piston” Conference on Stratified Charge Engines”, Inst. Mech. Engrs. London, England 1976
- Ishikawa, N. Daily, J.W. “Observation of Flow Characteristics in a Model I.C. Engine Cylinder” SAE Paper 780230 1978
- Iinuma, K. Iba, Y. “Studies of Flame Propagation Process” JARI Technical Memorandum 10 59 78 December 1972
- Iinuma, K. Iba, Y. “Studies of Flame Propagation (Structure of Flame Zone and Burning Velocity)” JARI Technical Memorandum 15 44 51 December 1973
- Heywood, J.B. “Pollutant Formation and Control in Spark-Ignition Engines” Progress in Energy and Combustion Science 1 135 164 1976
- Ekchian, A. Hoult, D.P. “Flow Visualization Study of the Intake Process of an Internal Combustion Engine” SAE Paper 790095 1979
- Holman, J.P. “Experimental Methods for Engineers” 2nd edition McGraw-Hill 1971
- Lancaster, D.R. Krieger, R.B. Lienesch, J. H. “Measurement and Analysis of Engine Pressure Data” SAE Paper 750026 1975
- LoRusso, J.A. “Combustion and Emissions Characteristics of Methanol, Methanol-Water and Gasoline-Methanol Blends in a Spark-Ignition Engine” Mech. Eng. Dept, M.I.T. 1976
- Blizard, N.C. Keck, J.C. “Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engines” SAE Paper 740191 , SAE Transactions 83 1974
- Tabaczynski, R.J. Ferguson, C.R. Radhakrishnan, K. “A Turbulent Entrainment Model for Spark-Ignition Engine Combustion” SAE Paper 770647 1977
- Metghalchi, M. “Laminar Burning Velocity of Mixtures of Air with Indolene, Isooctane, Methanol and Propane” Mech. Eng. Dept. M.I.T. 1980
- Weinberg, F.J. “Optics of Flames” Butterworth and Co. Ltd. 1963
- Wentworth, J.T. “Piston and Ring Variables Affect Exhaust Hydrocarbon Emissions” SAE Paper 680109 1968
- Furuhama, S. Tateishi, Y. “Gases in Piston Top-Land Space of Gasoline Engine” Transactions of the Society of Automotive Engineers of Japan, Inc. 4 1972
- Tabaczynski, R.J. Heywood, J.B. Keck J.C. “Time Resolved Measurements of Hydrocarbon Mass Flowrate in the Exhaust of a Spark Ignition Engine” SAE Paper 720112 , SAE Transactions 81 1972
- Ekchian, A. Heywood, J.B. Rife, J.M. “Time Resolved Measurements of the Exhaust from a Jet Ignition Prechamber Stratified Charge Engine” SAE Paper 770043 , SAE Transactions 86 1977
- Tabaczynski, R.J. Hoult, D.P. Keck, J.C. “High Reynolds Number Flow in a Moving Corner” J. Fluid Mech. 42 249 255 1970
- Daneshyar, H. Fuller, D.E. Deckker, B.E.L. “Vortex Motion Induced by the Piston of an Internal Combustion Engine” Int. J. Mech. Sci. 15 381 390 1973
- Weis, P. “A Parametric Study of Quench Layer properties by Rapid Sampling in a Spark Ignition Engine” Mech. Eng. Dept., M.I.T. 1980
- Heywood, J.B. Higgins, J.M. Watts, P.A. Tabaczynski, R.J. “Development and Use of a Cycle Simulation to Predict SI Engine Efficiency and NO x Emissions” SAE Paper 790291 1979