This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A REVIEW OF BASIC DESIGN PRINCIPLES FOR LOW-NOISE DIESEL ENGINES
Annotation ability available
Sector:
Language:
English
Abstract
In accordance with the main efforts of research and development in noise control of diesel engines measures which are essential for a noise reduction of more than 10 dB(A) and results achieved with an advanced direct injection combustion system are described. In general the noise of external engine parts can be reduced to a large extent only by vibration isolation or sound reducing shells. Considering economic aspects the attenuation of the total engine noise by more than 10 dB(A) requires a complete encapsulation of the engine which can with newly designed engines at least be partly integrated into the engine structure. Outgoing from some fundamentals about sound reducing shells the different approaches for low noise engines based on these principles and developed in the last decade are discussed. Specific measures applied with the advanced D.I. combustion system are discussed resulting, in comparison with optimized I.D.I. combustion systems, in equivalent exhaust emission, acceptable combustion noise and, regarding small diesel engines, in the same power output and speed maintaining the big advantage in fuel consumption.
Authors
Topic
Citation
Thien, G., "A REVIEW OF BASIC DESIGN PRINCIPLES FOR LOW-NOISE DIESEL ENGINES," SAE Technical Paper 790506, 1979, https://doi.org/10.4271/790506.Also In
References
- Shah K.S. “Geräuschuntersuchungen an Dieselmotoren.” (“Noise Investigations of Diesel Engines.”) Graz Dissertation Techn. University 1960
- Thien G.E. “Methods and Problems in Noise Reduction of High Speed Diesel Engines.” SAE Transactions 77 1968 Paper 680407
- Thien G.E. Fachbach H.A. “Geräuschverminderung an Dieselmotoren durch Änderung äuβerer Bauteile und schalldämmendes Verkleiden.” (“Noise Reduction on Diesel Engines by Modification of External Engine Parts and Sound Reducing Enclosures.”) MTZ 32 5 May 1971 145 152
- Thien G.E. Nowotny B. “Untersuchungen über den Einfluβ von Körperschallvorgängen auf das Gerausch von Dieselmotoren.” (“Investigations into the Influence of Structure Vibrations on Noise of Diesel Engines.”) MTZ 32 6 1971 186 193
- Thien G.E. “Ein Beitrag zur Geräuschverminderung bei schnellaufenden Dieselmotoren.” (“A Contribution to the Noise Reduction of High Speed Diesel Engines.”) FISITA London 1972
- Thien G.E. “The Use of Specially Designed Covers and Shields to Reduce Diesel Engine Noise.” SAE Paper 730244 Detroit Jan. 1973
- Thien G.E. Fachbach H.A. “Geräuscharme Dieselmotoren in neuartiger Bauweise.” (“A New Design Concept of Low Noise Diesel Engines.”) MTZ 35 8 1974
- Thien G.E. Fachbach H.A. “Design Concepts of Diesel Engines with Low Noise Emission.” SAE Paper 750838 Milwaukee Sept. 1975
- Fachbach H.A. Thien G.E. “Musterausführungen geräuscharmer Dieselmotoren.” (“Prototype Models of Quiet Diesel Engines.”) MTZ 36 10 1975
- Thien G.E. Fachbach H.A. “Quiet Automobiles - A Realistic Objective.” FISITA Tokyo 1976
- Fachbach H.A. Thien G.E. “Körperschallausbreitung bei Dieselmotoren.” (“Structure Vibration with Diesel Engines.”) MTZ 37 7 8 1976
- Thien G.E. “Elemente zur Abminderung der Schallemission von Verbrennungsmotoren heute üblicher Bauart.” (“Elements Reducing the Sound Emission of I. C. Engines of Conventional Design.”) Dissertation Technical University Graz Sept. 1977
- Fachbach H.A. “Entwicklung von neuartigen geräuscharmen Dieselmotoren.” (“Development of Newly Designed Diesel Engines with Low Noise.”) Dissertation Technical University Graz Sept. 1977
- Fachbach H.A. Thien G.E. “Ein neuer Weg zum geräuscharmen Dieselmotor.” (“A New Approach for a Low Noise Diesel Engine.”) FISITA Budapest 1978 11 23
- Thien G.E. “Beurteilung der geräuscherregenden Eigenschaften der Verbrennung an Diesel- und Ottomotoren mittels Frequenzanalyse des Brennraumdruckes.” (“Assessment of Noise Inducing Characteristics of Combustion with Diesel and Gasoline Engines by Frequency Analysis of Cylinder Pressure.”) MTZ 25 7 1964
- List H. Pachernegg S. “Developing High Speed Direct Injection Diesel Engines.” SAE Paper 978 B Detroit Jan. 1965
- Thien G.E. 8 1965
- Pischinger R. Cartellieri W. “Combustion System Parameters and their Effect upon Diesel Engine Exhaust Emissions.” SAE Paper 720756
- Schreiber E. Cichocki R. “Der Entwicklungsstand schadstoffarmer Fahrzeug-Dieselmotoren.” (“State of Development of Automotive Diesel Engines with Low Exhaust Emissions.”) ATZ 77 3 1975
- Pachernegg S.J. “Efficient and Clean Combustion.” SAE Paper 750787 Milwaukee Sept. 1975
- Freyn F. “Verbrennungsmotoren der AVL - Ein Rückblick auf 25 Jahre Entwicklung.” (“I.C. Engines of AVL - a Retrospect of 25 Year Development.”) MTZ 36 6 7 8 1975
- Tritthart P. Cartellieri W.P. “Ein Beitrag zur zuverlässigen Messung der aliphalischen Aldehyde - Teil 1 und Teil 2.” (“A Contribution to Reliable Measurement of Aliphatic Aldehydes - Part 1 and Part 2.”) MTZ 38 2 3 1977
- Cartellieri W.P. Cichocki R. Thien G.E. Fachbach H.A. “The Swirl Supported Direct Injection Diesel Combustion System - Its Potential of Meeting Economical and Environmental Requirements.” Conf. on Land Transp. Engines, Instn. Mech. Engrs, Paper C11/77 1977
- Cartellieri W.P. Schukoff B. “Die direkte Einspritzung als Verbrennungs ver fahren für leichte Dieselmotoren.” (“The Direct Injection as a Combustion System for Light Diesel Engines.”) FISITA Budapest 1978 1 10
- Lotze E. Berlin 1971 329 372
- Jackson R.S. “The Performance of Acoustic Hoods at Low Frequencies.” Acustica 12 1966 139 152
- Lotze E. Berlin 1971 411 435
- Priede T. “Relation between Form of Cylinder Pressure Diagram and Noise in Diesel Engines.” Proc. Instn. Mech. Engrs. (A.D.) 1 1960-61 63 77
- Föller D. Frankfurt/M 1972
- Wodiczka E. Frankfurt/M 1972
- Anderton D. Priede T. “The Influence of Automotive Diesel Engine Design on Combustion, Noise and Performance.” DOT Conference Sept. 7-9 1977