This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Test Procedures for Studying Vehicle Dynamics in Lane-Change Maneuvers
Annotation ability available
Sector:
Language:
English
Abstract
The use of both closed- and open-loop test procedures for evaluating the performance of motor vehicles in lane-change maneuvers is reviewed. It is found that (a) variations in driver skill, (b) differences in the amount of information imparted to the driver by the layout of the test course, (c) the asymmetry in response between right and left lane-changes, and (d) the lack of understanding of the connection between open- and closed-loop performance present difficulties in evaluating lane-change performance. Further study is recommended using a particular form of evasive performance test to seek identifiable ergonomic and vehicle dynamics bounds on driver-vehicle system performance.
Recommended Content
Technical Paper | Commercial vehicle pedal feeling comfort ranges definition |
Technical Paper | Electromechanical Suspension Performance Testing |
Ground Vehicle Standard | Laboratory Testing Machines for Measuring the Steady State Force And Moment Properties of Passenger Car Tires |
Authors
Topic
Citation
Fancher, P., Segel, L., Bernard, J., and Ervin, R., "Test Procedures for Studying Vehicle Dynamics in Lane-Change Maneuvers," SAE Technical Paper 760351, 1976, https://doi.org/10.4271/760351.Also In
References
- Hildebrandt T.J. Poskocil A.R. “Objective Testing in Handling Research.” SAE Paper No. 680015 January 1968
- Dugoff H. Segel L. Ervin R. “Measurement of Vehicle Response in Severe Braking and Steering Maneuvers.” SAE Paper No. 710080 January 1971
- Ervin R.D. Fancher P.S. Segel L. “Refinement and Application of Open-Loop Limit-Maneuver Response Methods.” SAE Paper No. 730491 May 1973
- Hayes G.G. Koppa R.J. White J.T. “Determination of Motor Vehicle Characteristics Affecting Driver Handling Performance.” NTIS Springfield, Va. March 1975
- McRuer D.T. Klein R.H. “Automobile Controllability-Driver/Vehicle Response for Steering Control.” I II NTIS Springfield, Va. February 1975
- “Test Procedures for Severe Lane-Change Manoeuvre.” May 1971
- “Comments to ISO - Test for Lane-Change Manoeuvre.”
- “Road Vehicles-Test Procedure for a Severe Lane-Change Manoeuvre.” 1975
- Chidini L. Schieppati A. “Further Research on the Driver-Vehicle System.” Report on the Fourth International Technical Conference on Experimental Safety Vehicles 417 424
- Montanari V. “Progress Report of ESV Development at Fiat.” Report on the Fourth International Technical Conference on Experimental Safety Vehicles 443 475
- Hirota A. et al. “Research on Task Performance for Evaluation of Vehicle Stability.” Traffic Safety and Nuisance Research Institute March 1974
- Rosenkrands J. “Remarks at the Accident Avoidance Seminar - Steering, Handling, Braking.” Report on the Fourth International Conference on Experimental Safety Vehicles 497 501
- Dugoff H. Ervin R. Segel L. “Vehicle Handling Test Procedures.” November 1970
- Ervin R. Grote P. Fancher P. MacAdam C. Segel L. “Vehicle Handling Performance.” NTIS Springfield, Va. November 1972
- Weir D. Teper G. Hoh H. Humes R. Sihilling C. Hofmann L. “Analysis of Truck and Bus Handling.” NTIS Springfield, Va. June 1974
- Roland R.D. Rice R.S. Dell'Amico F. “The Influence of Tire Properties on Passenger Vehicle Handling.” NTIS Springfield, Va. January 1975
- Bernard J.E. Fancher P.S. Gupta R. Moncarz H. Segel L. “Vehicle-In-Use Limit Performance and Tire Factors-The Tire In Use.” NTIS Springfield, Va. March 1975
- “Evaluation and Correlation of Driver/Vehicle Data.” NHTSA, Office of Contracts and Procurement Washington, D.C. April 21 1975
- Klein R. McRuer D. Weir D. “Test Procedures and Performance Measures Sensitive to Automobile Steering Dynamics.” Paper No. 171 11th Annual on Manual Control NASA Ames Research Center May 21 23 1975
- Bergman W. “Considerations in Determining Vehicle Handling Requirements.” SAE Paper No. 690234 January 1969
- Bergman W. “Measurement and Subjective Evaluation of Vehicle Handling.” SAE Paper No. 730492 May 1973
- General Motors Engineering Staff “Development of Task Performance Handling Tests.” General Motors Technical Center Engineer Publication A-2591 March 10 1969
- Bundorf R.T. “Driver-Vehicle Control Performance.” Automotive Safety Seminar General Motors Training Center June 20 21 1973