This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
New Developments in Piston Rings for the Modern Diesel Engine
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents unpublished data on new coating developments, new piston ring designs, and design considerations for the modern diesel engine. Data on the current state of the art of compression ring coatings along with technical data on new generation coatings are included as well as data on ring designs and/or design considerations which may be used to improve engine performance and life with respect to blow-by and oil control.
Recommended Content
Technical Paper | MoS 2 Coated Piston Ring to Prevent Piston's Aluminum Sticking |
Technical Paper | Experimental Analysis of an Inwardly-Opposed Piston Engine |
Technical Paper | Piston Rings for Diesel Engines - Effect of Keystone Angle on Oil Consumption |
Authors
Citation
McCormick, H., Anderson, R., Mayhew, D., and Rychlewski, W., "New Developments in Piston Rings for the Modern Diesel Engine," SAE Technical Paper 750769, 1975, https://doi.org/10.4271/750769.Also In
References
- Prasse Herbert F. McCormick Harold E. Anderson Roy D. “Heavy Duty Piston Rings--1968” SAE Technical Paper No. 680238 SAE Baltimore Section Meeting Feb. 18 1968
- Hyde G. F. Cromwell J. E. Arnold W. C. “Piston Ring Coating for High Performance Diesel Engines” SAE Technical Paper 670935 SAE meeting in Pittsburgh Pennsylvania Oct 30 Nov. 3 1967
- Prasse H. F. McCormick H. E. Anderson R. D. “New Developments in Piston Rings for High BMEP Engines” SAE Technical Paper 690753 National Powerplant Meeting Cleveland, Ohio Oct. 27-29 1969
- Presentations made at Conference on Piston Ring Scuffing The Institution of Mechanical Engineers London, England May 13-14 1975
- Stareck J. E. Seyb E. J. Tulumello A. C. “The Effect of Different Chromium Deposits on the Fatigue Strength of Hardened Steel” 42nd Annual AES Convention Cleveland, Ohio
- Wiegand H. Kaiser H. R. “Effect of Hard Chromium Plating on the Fatigue Strength of [High and Low] Alloy Steels and Gray Cast Irons” METALLOBERFLACHE 19 1965 1 1 8 Henry Brutcher Translation No. 6476
- Ting L. L. Mayer, J. E. Jr. “Piston Ring Lubrication and Cylinder Bore Wear Analysis, Part I--Theory” and “Part II--Theory Verification” ASME Paper No. 73-Lub-27
- Strasser E. Sander W. “The Influence of the Piston on the Operational Functioning and Reliability of Petrol Engines and Compressors” Karl Schmidt GmbH 7107 Neckarsulm
- Brown S. R. Hamilton G. M. “Pressure Measurements between the Rings and Cylinder Liner of an Engine” Paper C72/75 Conference on Piston Ring Scuffing London, England May 13-14 1975
- Bishop G. R. Leavitt A. H. “Performance Simulation of a Diesel Piston and Ring System” SAE Technical Paper 750768 SAE Off Highway Vehicle Meeting and Exhibition Milwaukee, Wisconsin Sept. 8-11 1975
- Eweis M. VDI-Verlag Berlin 1935
- Mitchell M. R. “Effects of Graphite Morphology, Matrix Hardness, and Structure on the Fatigue Resistance of Gray Cast Iron” SAE Technical Paper 750198 Automotive Engineering Congress and Exposition Detroit, Michigan Feb. 24-28 1975
- Tucker Lee Downing Stephen Camillo Louis “Accuracy of Simplified Engine Prediction Methods” SAE Technical Paper 750043 Automobile Engineering Congress and Exposition Detroit, Michigan Feb. 24-28 1975
- Tanikawa M. Kishi K. “Heat Treatment in Relation to Fatigue Strength of Nodular Cast Iron” IMONO 41 1969 4 296 297 Henry Brutcher Translation No. 8062
- Terada H. Suzukawa Y. Fukusima M. “Effect of the Graphite Structure on the Thermal Fatigue of Cast Iron” IMONO 41 1969 4 237 238 Henry Brutcher Translation No. 8020