This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Graphite Composite Materials Applications in Aircraft Structures
Annotation ability available
Sector:
Language:
English
Abstract
Graphite fiber-reinforced composite materials have been evaluated for use in aircraft structural components, primarily as a means of reducing the weight of selected metal parts. Control surfaces, fairings, internal structures, and landing gear have been manufactured, laboratory tested, and, in many cases, flight tested. Weight savings of 15-30% have been demonstrated; and, through less conservative design estimates, savings in excess of 40% appear feasible. Raw material cost has been the pacing item in approaching business aircraft applications; however, current trends show strong potential for cost competitive use.
Recommended Content
Authors
Topic
Citation
Cross, S., "Graphite Composite Materials Applications in Aircraft Structures," SAE Technical Paper 750533, 1975, https://doi.org/10.4271/750533.Also In
References
- Personal Communication with Mr. L. Vosteen NASA, Langley Research Center January 8 1975
- Wada J. “Cost Effective Applications of Graphite Composites on the YF-17 Prototype Fighter.” Air Force Conference on Fibrous Composites in Flight Vehicle Design Dayton, Ohio May 22-24 1974
- Browning C.E. “The Effects of Moisture on the Properties of High Performance Structural Resins and Composites.” Composite Materials; Testing and Design (Third Conference) American Society for Testing Materials 1974 284 302
- Scow A.L. et al. “Advanced Development of Not-Critical-to-Flight-Safety Advanced Composite Aircraft Structures.” Final Technical Report, AFML-TR-74-38 March 1974
- Dexter P.F. Shumaker G.C. “Graphite/Epoxy Landing Gear Environmental Tests.” November 1974
- Green R.H. “Developing GFRP Sandwich Structures for Transverse Impact Loads.” 26th Annual Conference of SPI February 1971
- Fogg L.O. “Hybrid Composite Design for Damage Tolerance.” Air Force Conference on Fibrous Composites in Flight Vehicle Design Dayton, Ohio May 22-24 1974
- Stansbarger D.L. et al. “Low Cost Manufacturing Concepts of Advanced Composite Primary Aircraft Structures.” Northrop Corporation, Second Quarterly Progress Report, IR-406-4(11) October 1974
- Swazey E.H. “Manufacturing Methods for Low Cost Tooling for Advanced Composite Shell Type Structure.” General Dynamics, Interim Technical Report IR-474-3(IV) June 1974
- Scow A.L. “Design/Cost Considerations for Graphite Structures.” Air Force Conference on Fibrous Composites in Flight Vehicle Design Dayton, Ohio May 22-24 1974
- Littlefield J.E. “Design of a Graphite/Epoxy S-3A Spoiler.” Air Force Conference on Fibrous Composites in Flight Vehicle Design Dayton, Ohio May 22-24 1974
- Foreman C.R. “Design of an Advanced Composite Outer Wing for the A-70 Aircraft.” Air Force Conference on Fibrous Composites in Flight Vehicle Design Dayton, Ohio May 22-24 1974
- Hart-Smith L.J. “Influence of Joint Details on Design of Composite Structures.” Air Force Conference on Fibrous Composites in Flight Vehicle Design Dayton, Ohio May 22-24 1974