This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Some Problem Areas in Engine Simulation
Annotation ability available
Sector:
Language:
English
Abstract
Problem areas in engine simulation where the required information is lacking are discussed. The need for improved heat transfer, combustion, friction, and turbocharger models is discussed as are instrumentation needs for measurements of accurate pressure, radiant heat transfer, time-varying cylinder velocities, and instantaneous mass flow rates.
Authors
Topic
Citation
Borman, G., Myers, P., and Uyehara, O., "Some Problem Areas in Engine Simulation," SAE Technical Paper 710172, 1971, https://doi.org/10.4271/710172.Also In
References
- McAulay K. J. Wu Tang Chen Simon K. Borman G. L. Myers P. S. Uyehara O. A. “Development and Evaluation of the Simulation of Compression Ignition Engines.” SAE Transactions 74 1965 paper 650451
- Krieger R. B. Booy R. R. Myers P. S. Uyehara O. A. “Simulation of a Crankcase Scavenged, Two Stroke, SI Engine and Comparisons with Experimental Data.” Paper 690135 SAE International Automotive Engineering Congress Detroit January 1969
- Benson R. S. ASME paper 69-WA/DGP-9 1969
- Alyea J. W. Myers P. S. Uyehara O. A. “The Development and Evaluation of an Electronic Indicated Horsepower Motor.” Paper 690181 SAE International Automotive Engineering Congress Detroit January 1969
- Brown W. L. “Methods for Evaluating Requirements and Errors in Cylinder Pressure Measurement.” SAE Transactions 76 paper 670008
- Matsuoka S. 1967
- Overbye V. D. Bennethum J. E. Uyehara O. A. Myers P. S. “Unsteady Heat Transfer in Engines SAE Transactions 69 1961 paper 201-C
- LeFeuvre T. L. Myers P. S. Uyehara O. A. “Experimental Instantaneous Heat Fluxes in a Diesel Engine and Their Correlation.” Paper 690464 SAE Mid-Year Meeting Chicago May 1969
- Ebersole George D. Myers P. S. Uyehara O. A. “The Radiant and Convective Components of Diesel Engine Heat Transfer.” Paper 701 -C SAE International Summer Meeting Montreal June 1963
- Flynn Patrick F. Mech. Engr. Dept., Univ. of Wisc. 1970
- Ohigashi S. Hamamoto Y. Tanabe S. “A New Digital Method for Measuring Gas Flow Velocity by Electric Discharge.” Paper 690180 SAE International Automotive Engineering Congress Detroit January 1969
- Nakajima K. et al. Bul. JSAE 1969
- Huffaker R. M. “Application of Laser Doppler Velocity Instrumentation to the Measurement of Jet Turbulence.” Paper 690266 SAE International Automotive Engineering Congress Detroit January 1969
- Shipinski J. H. Mech. Engr. Dept., Univ. of Wisc. 1967
- Annand W. J. D. Proc. Inst. of Mech. Eng. 177 36 1963
- Myers P. S. Uyehara O. A. “Flame Temperature Measurements-Electronic Solution of the Temperature Equations.” SAE Quarterly Transactions 1947
- Uyehara O. A. Myers P. S. “Diesel Combustion Temperatures-Influence of Fuels of Selected Composition.” SAE Quarterly Transactions 1949
- Pfriem H. Forschung, Geb. Eng. 13 150 164 1942
- Elser K. Mitt 15 Inst. Thermodyn. Verbrennungs-motorenbrau, ETH, Zurich 1954
- Oguri T. Bul. Jap. Soc. Mech. Engrs. 3 363 370 1960
- Goluba R. W. Borman G. L. Int. J. Heat Mass Transfer 12 1281 1293 September 1969
- Wendland D. W. Mech. Engr. Dept., Univ. of Wisc., 1968
- Semenov E. S. Sokolik A. S. IZV. An SSR Otd. Tehn. n. 8 130 1958
- Woschni G. “A University Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine.” SAE Transactions 76 paper 670931
- Schweitzer P. H. Penn. State Univ. Engr. Expt. Station Bul. 35 September 1926
- Pischinger A. Pischinger F. Die Verbrennungskraft maschine Band 7 Springer-Verlag Vienna 1957
- Whitehouse N. E. et al. I.M.E. 176 195 217 1962
- Krieger R. B. Borman G. L. ASME paper 66-WA/DGP-4 November 1966
- Goudie G. D. Eleventh Int. Sym. on Comb. 1966
- Weber H. Borman G. L. “Parametric Studies Using a Mathematically Simulated Diesel Engine Cycle.” SAE Transactions 76 paper 670480
- Wiebe I. Verlag der Akademie der Wissenchaften der VdSSR Moscow 1956
- Lange W. Woschni G. 1965
- Shipinski J. H. Uyehara O. A. Myers P. S. ASME paper 68-DGP-11 1968
- Austen A. E. W. Lyn W. T. Proc. I.M.E. 1960-61 47 62
- Held G. 1966 480 484
- Nagao F. Ikegami M. Oshima K. Bul. JSME 10 39 1967 532 542
- Cook H. A. “Diesel Engine Cycle Analysis of Relationships of Fuel Injection to Fuel Compression Ignition Characteristics and Best Fuel Utilization.” Paper 650449 SAE Mid-Year Meeting Chicago May 1965
- Borman G. L. Mech. Engr. Dept., Univ. of Wisc. 1964
- Gish R. E. McCullough J. D. Retzloff J. B. Mueller H. T. “Determination of True Engine Friction.” SAE Transactions 66 1958
- Bishop I. “Effect of Design Variables on Friction and Economy.” SAE Transactions 73 1965
- Blair L. W. Midwestern Simulation Council Meeting-NASA Cleveland 1965
- Benson R. S. Scrimshaw K. H. Proc. I.M.E. 1965-66 180
- Wallace F. J. Blair G. P. ASME paper 65-GTP-21 1965
- Horlock J. H. Benson R. S. Proc. Sixth Int. Cong. Combustion Engines Copenhagen 1962
- Benson R. S. Whitfield A. Proc. I.M.E. 1965-66 180