This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Metal Forming by Electrical Energy Release - Trends and Applications
Annotation ability available
Sector:
Language:
English
Abstract
The evaluation of electrohydraulic and electromagnetic forming at General Dynamics/Fort Worth is discussed. Particular attention is given to current trends and applications of the two processes at GD/FW. Parts formed by EHF and EMF ranging in size from 3/4 in. diameter to 8–1/2 in. diameter are described.
Recommended Content
Aerospace Standard | SEAL, TYPE I AND II STANDARD AND LOW PROFILE |
Aerospace Standard | Identification Marking Methods |
Aerospace Standard | Top Visual Quality (TVQ) O-ring Packings and Gaskets - Surface Inspection Guide and Acceptance Standard |
Authors
Topic
Citation
Smith, K., "Metal Forming by Electrical Energy Release - Trends and Applications," SAE Technical Paper 650190, 1965, https://doi.org/10.4271/650190.Also In
References
- Feddersen E. W. “Production Application of High Energy Rate.” SAE Paper No. 160C 1960
- Strohecker D. E. Sabroff A. M. “High Velocity Forming Metals.” Englewood Cliffs, New Jersey Prentice-Hall, Inc 1964 4
- Schwinghamer R. J. “Electrical and Diagnostic Aspects of Electrohydraulic and Magnetic Forming.” SAE Paper No. 672C April 1963
- Pfanner Gunther et al. “Metal Forming by Capacitor Discharge.” Republic Aviation, Farmingdale Long Island, New York 1963
- Cadwell G. C. “Spark Forming Goes to Work,” November 13 1961 126 129
- Restreake W. M. “Now Non-Chemical Explosions Shape Hard-to-Form Metal,” October 26 1961 88 89
- “Spark Forming Takes Place on the Line,” November 13 1961 172 173
- Brower D. F. “Magnetic-Pulse Forming,” SAE Journal February 1962 38 40
- Wagner H. J. Dunleavy J. G. “Hydrospark Forming - Evolution of the Process,” March 1960 83 86
- Martin Edward A. “The Underwater Spark: An Example of Gaseous Conduction at about 10,000 Atmospheres.” Ann Arbor, Michigan ASTIA AD-105473, Arlington Hall Station July 1956
- LeGrand Rupert “Underwater Lightning Sparks New Metal Forming Process,” October 19 1959 123 124
- Berdsall D. H. Ford F. C. Furth H. P. Riley R. E. “Magnetic Forming! What is it?,” March 20 1961 117 121
- Brower D. F. “Forming with Magnetic Pulses,” April 12 1962 144 146 148
- Cadwell G. C. “Electrical Discharge Forming on a Practical, Production Basis,” May 1963 40 45
- Chace William G. “Bibliography of Electrically Exploded Wire Phenomenon,” November 1958
- Chace William G. Moore Howard K. “Exploding Wires.” New York Plenum Press, Inc. 1959
- Courtis W. F. “Electrical Discharge Metal Forming.” Paper No. 62-MD-23, American Society of Mechanical Engineers February 2 1962
- DerDerian A. R. “Direct Conversion of Electrical Energy Into Work, Electro-Hydraulic Forming.” 1960
- “Electrohydraulic Forming,” June 13 1962 1347 1349
- Eshelman R. H. “New Metalforming Techniques Brighten Future Designs,” December 28 1961 48 49
- Feddersen E. W. “Electro-Hydraulic Process of High Energy Rate Forming.” 1960
- Felts Robert “Application of the Electrohydraulic Effect to Metal Forming.” 1962
- Furth H. P. Waniak R. W. “Some New Ideas in Magnetic Metal Forming,” SAE Journal February 1962 38 40
- Hanley Fiske “High Energy Rate Forming at General Dynamics/Fort Worth.” 1962
- Herchenroeder L. W. “Electrohydraulic Forming,” August 1960 302 303
- “Hydrospark Forming Offers Control, High Accuracy,” July 11 1960 92 94
- Kegg Richard L. Kalpakcioglue Serope “Research in Electric Discharge Forming of Metals,” 1962
- Langlois A. P. “Electromagnetic Metal Forming,” May 1961 105 108
- Langlois A. P. “Metal Forming with Electromagnetics,” 1960
- “Magnetic Forming,” October 3 1960 95 96
- “Magnetic-Pulse Forming,” April 1962 112 114
- Martin Edward A. “Experimental Investigation of a High-Energy Density, High-Pressure Arc Plasma,” Journal of Applied Physics February 1960 253 267
- May R. K. “High Energy Rate Forming Production Applications,” ASTME Technical Paper October 1962
- “Packaged Lightning Dynamites Successor in High-Energy Forming?,” April 18 1960 104 105
- Schrom E. C. “Metal Forming with Capacitor Discharge Electro-Spark,” ASTME Seminar Paper 1962
- Schwinghamer R. J. “Electrical and Diagnostic Aspects of Electrohydraulic and Electromagnetic Forming,” SAE Paper No. 672C April 1963
- Schwinghamer R. J. “Electrohydraulic Forming,” September 1963 85 89 115
- “The Shape of Electroshape,” January 1962 46 49
- Smith Kenneth F. “Forming of Tubular Aircraft Parts Simplified by Electrohydraulic Shot,” September 1964 114 117
- “Spark Bomb Method Promises In-Plant Explosive Forming,” February 1960 99 101
- Wagner H. J. Boulger F. W. “High-Velocity Metal working Processes Based on the Sudden Release of Electrical Energy,” October 27 1960
- Wood W. W. “High-Energy Rate Forming,” September and October 1963 89 95 83 90
- Wood William W. “High-Energy Forming Methods - A Critical Review,” June 15 1960 93 105