This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Moisture Adsorption on Low-Speed and Moderate-Speed Braking: Effect on In-Stop Friction Coefficient and Low Frequency Noise
Technical Paper
2023-01-1862
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Copper-free NAO disc pads of passenger cars were investigated for a combination of prior braking conditions and moisture adsorption influencing in-stop friction and noise during low-speed stops, and in-stop-friction during moderate-speed stops. Prior braking conditions and moisture adsorption strongly influence subsequent in-stop friction behavior and noise at room temperature. The low-speed in-stop friction behavior looks totally different from that of moderate-speed stops. The low-speed in-stop friction increasingly oscillates with increasing moisture adsorption and goes down towards the end of a stop, which is accompanied by increasing low-frequency noise.
The moisture content needs to be quantified/specified to obtain repeatable/reproducible brake test results as the moisture is an unintended and uncontrolled ingredient of a friction material. As the disc surface roughness increases due to prior braking conditions, the friction coefficient of low-speed stops is found to decrease. The changing friction coefficient is explained by the nature of the friction film and its interactions with moisture.
Authors
- Meechai Sriwiboon - King Mongkut's University of Technology North Bangkok
- Saiprasit Koetniyom - King Mongkut's University of Technology North Bangkok
- Seong Kwan Rhee - SKR Consulting Inc.
- Jittrathep Sukultanasorn - Compact International (1994) Co., Ltd.
- Kritsana Kaewlob - Compact International (1994) Co., Ltd.
- Jitpanu Kunthong - Compact International (1994) Co., Ltd.
Citation
Sriwiboon, M., Koetniyom, S., Rhee, S., Sukultanasorn, J. et al., "Effect of Moisture Adsorption on Low-Speed and Moderate-Speed Braking: Effect on In-Stop Friction Coefficient and Low Frequency Noise," SAE Technical Paper 2023-01-1862, 2023, https://doi.org/10.4271/2023-01-1862.Also In
References
- Grochowicz , J. , Agudelo , C. , Reich , A. , Wollenweber , K.-H. et al. Brake Dynamometer Test Variability Part 2 – Descrition of the Influencing Factores SAE Technical Paper 2011-01-2374 2011 https://doi.org/10.4271/2011-021-2374
- Rhee , S.K. , Rathee , A. , Singh , S.R. , and Sharma , D.K. Kinetics of Moisture Adsorption and Its Impact on Brake Pad Compression Modulus and Compressibility: Static Modulus of Compression vs. Dynamic Modulus of Compression vs. Hardness vs. Friction Coefficient SAE Technical Paper 2022-01-1165 2022 10-4271/2022-01-1165
- Sriwiboon , M. , Koetniyom , S. , Rhee , S.K. , Sukultanasorn , J. et al. A Study of Moisture Sorption-Desorption and Its Influence on the Dynamic Modulus and Friction Coefficient of Copper-Free Brake Pads SAE Technical Paper 2022-01-1173 2022 10-4271/2022-01-1173
- Kim , S.W. , Lee , S.J. , Park , B.K. , and Rhee , S.K. A Comparative Study of Humidity Effects on Friction, Pad Wear, Disc Wear, DTV, Brake Noise and Physical Properties of Pads SAE Technical Paper 2011-01-2371 2011 https://doi.org/10.4271/2011-01-2371
- Kim , S.W. , Lee , S.J. , Park , B.K. , Kim , S.W. et al. A Comparative Study of Non-Asbestos Organics vs. Low Steel Lomets for Humidity Sensitivity SAE Technical Paper 2012-01-1788 2012 https://doi.org/10.4271/2012-01-1788
- Rhee , S. , Sharma , D. , Singh , S.R. , and Rathee , A. An Investigation of the Role of Wear and Friction Film Influencing the Friction Coefficient of Brakes: Mechanism of Brake Fade SAE Technical Paper 2020-01-1630 2020 https://doi.org/10.4271/2020-01-1630
- Petrova , D. , Weber , B. , Allain , C. , Audebert , P. et al. Fluoresence Microscopy Visualization of the Roughness-Induced Tansition between Lubrication Regimes Amer. Ass. for the Adv. of Sci., Science Advances 5 2019 eaaw4761
- Sedlacek , M. , Podgornik , B. , and Vizintin , J. Influence of Surface Preparation on Rough Parameters, Friction and Wear Wear 266 2009 482 487
- Khaday , S. , Li , K.-W. , Peng , L. , and Chen , C.-C. Relationship between Friction Coefficient and Surface Roughness of Stone and Ceramic Floors Coatings 11 10 2021 1254 10.3390/coatings11101254
- Rhee , S.K. and Thesier , P.A. Effects of Surface Roughness of Brake Drum on Coefficient of Friction and Lining Wear SAE Technical Paper 720449 1972 https://doi.org/10.4271/720449
- Johnson , R.L. and Sliney , H.E. High Temperature Friction and Wear Properties of Bonded Solid Lubricant Films Containing Lead Monoxide Lubrication Engineering 15 1959 487 491
- Yang , L. , Sega , M. , and Harting , J. Capillary-Bridge Forces between Solid Particles: Binsight from Lattice Olzmann Simulations AIChE Journal 67 9 2021 doi.org/10.1002/aic.17350
- Kumari , D. 2009
- Liu , T. , Rhee , S.K. , and Lawson , K.L. A Study of Wear Rates and Transfer Films of Friction Materials Wear 60 1980 1 12
- Jacko , M.G. , Tsang , P.H.S. , and Rhee , S.K. Wear Debris Compaction and Friction Film Formation of Polymer Composites Ludema , K.C. Wear of Materials New York ASME 1989
- Nosko , O. , Alemani , M. , and Olofsson , U. 2015
- Oroumiyeh , F. and Zhu , Y. Brake and Tire Particles Measured from on-Road Vehicles: Effects of Vehicle Mass and Braking Intensity Atmospheric Environment: X 12 2021 10.1016/j.aeaoa.2021.100121
- Kukutschova , J. , Moravec , P. , Tomasek , V. , Matejka , V. et al. Airborne Nano/Micro-Sized Wear Particles from Low-Metallic Automotive Brakes Environmental Pollution 159 2011 998 1006
- Wikipedia
- Zheng , Y.-N. , Hai-Feng , L. , Guo , X.-L. , and Gong , X. Study on the Effect of Nanoparticles on the Bulk and Flow Properties of Granular Systems Fuel Processing Technology 177 2018 doi.org/10.1016/j.fuproc.2018.04.002
- Teteja , A. , MacKay , M.E. , Hawker , C.J. , and Van Horn , B. Effect of Ideal, Organic Nanoparticles on the Flow Properties of Linear Polymers: Non-Einstein-like Behavior Macromolecules 38 19 2005 8000 8011
- Islam , M.N. , Siddika , A. , Hossain , M.B. , Rahman , A. Asad , M.A. Effect of Particle Size on the Shear Strength Behavior of Sands Austalian Geomechanica 46 3 2011
- Amidon , G.E. and Houghton , M.E. The Effect of Moisture on the Mechanical and Powder Flow Properties of Microcrystalline Cellulose Pharmaceutical Research 12 1996 923 929
- Dacanal , G.C. and Menegalli , F.C. Experimental Study of Fuidized Bed Agglomeration of Acerola Powder Brazilian Journal of Chemical Engineering 25 1 2008 51 58
- Johnston , P.K. , Doyle , E. , and Orzel , R.A. Phenolics: A Literature Review of Thermal Decomposition Products and Toxicity J. of Amer. College of Toxicology 7 2 1988
- Lenin Singaravelu , D. , Vijay , R. , and Fiip , P. Influnce of Various Cashew Friction Dusts on the Fade and Recovery Characteristics of Non-Asbestos Copper Free Rake Friction Composites Wear 426-427 2019 10.1016/j.wear.2018.12.036
- Menon , A.R.R. , Pillai , C.K.S. , and Nando , G.B. Thermal Degradation Characteristics of Natural Rubber Vulcaniztes Modified with Phosphorylated Cashew Nut Shell Liquid Polymer Degration and Stability 52 3 1996 10.1016/0141-3910(96)00007-9
- Mews , J. and Wagner , N.J. Thixotropy Advances in Colloid and Interface Science 147-148 2009 214 227 doi/10.1016/j.cis.2008.09.005
- Rhee , S. , Sharma , D. , Singh , S.R. , and Rathee , A. An Investigation of the Role of Wear and Friction Film Influencing the Friction Coefficient of Brakes: Mechanism of Brake Fade SAE Technical Paper 2020-01-1630 2020 https://doi.org/10.4271/2020-01-1630
- Rhee , S.K. , Sriwiboon , M. , Kaewlob , K. , and Tiempan , N. A Contribution to the Understang of Friction and Squeal of Automotive Brakes: Wear Particle Generation and Deformation of Sliding Surface Region Influencing the Friction Coefficient of Copper-Free Disc Pads SAE Technical Paper 2021-01-1288 2021 https://doi.org/10.4271/2021-01-1288
- Popova , E. and Popov , V. The Research Woks of Coulomb and Amontons and Generalized Laws of Friction Friction 3 2 2015 10.1007/s40544-015-0074-6
- Desplanques , Y. Amontons-Coulomb Friction Laws: A Review of the Original Manuscript SAE Technicaql Paper 2014-01-2489 2014 https://doi.org/10.4271/2014-01-2489