This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Investigation on the Effect of Fuel Injection Timing on Soot Particle Size and Number Characteristics of Diesel Engine
Technical Paper
2022-01-1053
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Diesel engines are lucrative in terms of high thermal efficiency and low specific fuel consumption. The major drawbacks of these engines are high NOx and particulate matter (PM) emissions due to heterogeneous combustion. In the current emissions norms (BS-VI), a limit for particle number concentration is also introduced. There are few numerical studies investigating the soot particle size and number characteristics at different engine operating conditions. In this work, a parametric numerical study is conducted to investigate the effect of engine operating parameters on PM characteristics such as number density, size, and volume fraction. Simulations were performed using the Reynolds Averaged Navier Stokes equation with renormalization group K-ε turbulence model available in ANSYS FORTE CFD software. A detailed reaction mechanism consisting of 243 species and 1765 reactions with 66.8/33.3 weight percent of n-decane / alpha methyl napthalene diesel surrogate is employed to simulate diesel combustion and emissions. Method of the moment has been employed for predicting soot particle number and size for closed cycle simulations in ANSYS FORTE CFD software. Results indicate that an advanced injection timing reduces the peak particle number density and mean PM average diameter due to reduced soot formation rates and increased oxidation rates. An increase in injected fuel mass enhances the particle number density, mean PM average diameter and PM volume fraction due to surface growth and polycyclic aromatic hydrocarbons (PAH) coagulation reactions in the presence of high acetylene concentration and pyrene. Additionally, results indicate that the formation of polyaromatic hydrocarbon species decreased with an increase in engine speed, thereby decreasing the PM number density, mean PM average diameter and PM volume fraction.
Recommended Content
Authors
Topic
Citation
Rana, S., Saxena, M., Maurya, R., and Shukla, P., "Numerical Investigation on the Effect of Fuel Injection Timing on Soot Particle Size and Number Characteristics of Diesel Engine," SAE Technical Paper 2022-01-1053, 2022, https://doi.org/10.4271/2022-01-1053.Also In
References
- Crolla , D. Encyclopedia of Automotive Engineering John Wiley & Sons 2015
- Rodríguez , F. , Bernard , Y. , Dornoff , J. , and Mock , P. Recommendations for Post-Euro 6 Standards for Light-Duty Vehicles in the European Union Communications 49 30 2019 847129 847102
- Lähde , T. , Giechaskiel , B. , Pavlovic , J. , Suarez-Bertoa , R. et al. Solid Particle Number Emissions of 56 Light-Duty Euro 5 and Euro 6 Vehicles Journal of Aerosol Science 159 2022 105873
- Eastwood , P. Particulate Emissions from Vehicles John Wiley & Sons 2008
- Williams , M. and Minjares , R. 2016
- Donaldson , K. , Tran , L. , Jimenez , L.A. , Duffin , R. et al. Combustion-Derived Nanoparticles: A Review of their Toxicology Following Inhalation Exposure Particle and Fibre Toxicology 2 1 2005 1 14
- Tree , D.R. and Svensson , K.I. Soot Processes in Compression Ignition Engines Progress in Energy and Combustion Science 33 3 2007 272 309
- Omidvarborna , H. , Kumar , A. , and Kim , D.S. Recent Studies on Soot Modeling for Diesel Combustion Renewable and Sustainable Energy Reviews 48 2015 635 647
- Frenklach , M. Reaction Mechanism of Soot Formation in Flames Physical Chemistry Chemical Physics 4 11 2002 2028 2037
- Richter , H. and Howard , J.B. Formation of Polycyclic Aromatic Hydrocarbons and their Growth to Soot—A Review of Chemical Reaction Pathways Progress in Energy and Combustion Science 26 4-6 2000 565 608
- Wang , H. Formation of Nascent Soot and Other Condensed-Phase Materials in Flames Proceedings of the Combustion Institute 33 1 2011 41 67
- Sander , M. , Patterson , R.I. , Braumann , A. , Raj , A. et al. Developing the PAH-PP Soot Particle Model using Process Informatics and Uncertainty Propagation Proceedings of the Combustion Institute 33 1 2011 675 683
- Rana , S. , Saxena , M.R. , and Maurya , R.K. A Review on Morphology, Nanostructure, Chemical Composition, and Number Concentration of Diesel Particulate Emissions Environmental Science and Pollution Research 2022 1 58
- Tao , F. , Reitz , R.D. , Foster , D.E. , and Liu , Y. Nine-Step Phenomenological Diesel Soot Model Validated Over a Wide Range of Engine Conditions International Journal of Thermal Sciences 48 6 2009 1223 1234
- Liu , Y. , Tao , F. , Foster , D.E. , and Reitz , R.D. Application of a Multiple-Step Phenomenological Soot Model to HSDI Diesel Multiple Injection Modeling SAE Transactions 2005 829 844
- Hiroyasu , H. and Kadota , T. Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines SAE Transactions 1976 513 526
- Flynn , P.F. , Durrett , R.P. , Hunter , G.L. , zur Loye , A.O. et al. Diesel Combustion: An Integrated View Combining Laser Diagnostics, Chemical Kinetics, and Empirical Validation SAE Transactions 1999 587 600
- Dec , J.E. A Conceptual Model of DI Diesel Combustion based on Laser-Sheet Imaging SAE Transactions 1997 1319 1348
- Hiroyasu , H. , Kadota , T. , and Arai , M. Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions: Part 1 Combustion Modeling Bulletin of JSME 26 214 1983 569 575
- Tesner , P.A. , Smegiriova , T.D. , and Knorre , V.G. Kinetics of Dispersed Carbon Formation Combustion and Flame 17 2 1971 253 260
- Khan , I.M. and Greeves , G. A Method for Calculating the Formation and Combustion of Soot in Diesel Engines Heat Transfer in Flames 25 1974
- Kazakov , A. and Foster , D.E. Modeling of Soot Formation during DI Diesel Combustion using a Multi-Step Phenomenological Model SAE Transactions 1998 1016 1028
- Tao , F. , Golovitchev , V.I. , and Chomiak , J. A Phenomenological Model for the Prediction of Soot Formation in Diesel Spray Combustion Combustion and Flame 136 3 2004 270 282
- Tao , F. , Foster , D.E. , and Reitz , R.D. Characterization of Soot Particle Distribution in Conventional, Non-Premixed DI Diesel Flame using a Multi-Step Phenomenological Soot Model Proceedings of the Combustion Institute 31 2 2007 2991 2998
- Mosbach , S. , Celnik , M.S. , Raj , A. , Kraft , M. et al. Towards a Detailed Soot Model for Internal Combustion Engines Combustion and Flame 156 6 2009 1156 1165
- Fraioli , V. , Beatrice , C. , and Lazzaro , M. Soot Particle Size Modelling in 3D Simulations of Diesel Engine Combustion Combustion Theory and Modelling 15 6 2011 863 892
- Patterson , M.A. , Kong , S.C. , Hampson , G.J. , and Reitz , R.D. Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions SAE Transactions 1994 836 852
- Micklow , G.J. and Gong , W. A Multistage Combustion Model and Soot Formation Model for Direct-Injection Diesel Engines Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 216 6 2002 495 504
- Cheng , X. , Chen , L. , Yan , F. , and Dong , S. Study on Soot Formation Characteristics in the Diesel Combustion Process based on an Improved Detailed Soot Model Energy Conversion and Management 75 2013 1 10
- Cheng , X. , Chen , L. , Hong , G. , Yan , F. et al. Modeling Study of Soot Formation and Oxidation in DI Diesel Engine using an Improved Soot Model Applied Thermal Engineering 62 2 2014 303 312
- Cheng , X. , Jv , H. , and Wu , Y. Application of a Phenomenological Soot Model for Diesel Engine Combustion Internal Combustion Engine Division Spring Technical Conference 2008, January 205 214
- Kong , S.C. , Sun , Y. , and Rietz , R.D. 2007
- Tao , F. , Liu , Y. , RempelEwert , B.H. , Foster , D.E. et al. Modeling the Effects of EGR and Injection Pressure on Soot Formation in a High-Speed Direct-Injection (HSDI) Diesel Engine using a Multi-Step Phenomenological Soot Model SAE Transactions 2005 263 283
- Vishwanathan , G. and Reitz , R.D. Development of a Practical Soot Modeling Approach and its Application to Low-Temperature Diesel Combustion Combustion Science and Technology 182 8 2010 1050 1082
- Balthasar , M. and Kraft , M. A Stochastic Approach to Calculate the Particle Size Distribution Function of Soot Particles in Laminar Premixed Flames Combustion and Flame 133 3 2003 289 298
- Singh , J. , Balthasar , M. , Kraft , M. , and Wagner , W. Stochastic Modeling of Soot Particle Size and Age Distributions in Laminar Premixed Flames Proceedings of the Combustion Institute 30 1 2005 1457 1465
- Netzell , K. , Lehtiniemi , H. , and Mauss , F. Calculating the Soot Particle Size Distribution Function in Turbulent Diffusion Flames using a Sectional Method Proceedings of the Combustion Institute 31 1 2007 667 674
- Aubagnac-Karkar , D. , El Bakali , A. , and Desgroux , P. Soot Particles Inception and PAH Condensation Modelling Applied in a Soot Model Utilizing a Sectional Method Combustion and Flame 189 2018 190 206
- Frenklach , M. and Wang , H. Detailed Modeling of Soot Particle Nucleation and Growth Symposium (International) on Combustion 23 1 1991, January 1559 1566
- Frenklach , M. Method of Moments with Interpolative Closure Chemical Engineering Science 57 12 2002 2229 2239
- Lee , J. , Sung , N.W. , and Huh , K.Y. Prediction of Soot Particle Size Distribution for Turbulent Reacting Flow in a Diesel Engine International Journal of Engine Research 12 2 2011 181 189
- Duvvuri , P.P. , Sukumaran , S. , Shrivastava , R.K. , and Sreedhara , S. Modeling Soot Particle Size Distribution in Diesel Engines Fuel 243 2019 70 78
- Aubagnac-Karkar , D. , Michel , J.B. , Colin , O. , Vervisch-Kljakic , P.E. et al. Sectional Soot Model Coupled to Tabulated Chemistry for Diesel RANS Simulations Combustion and Flame 162 8 2015 3081 3099
- Frenklach , M. Computer Modeling of Infinite Reaction Sequences: a Chemical Lumping Chemical Engineering Science 40 10 1985 1843 1849
- McGraw , R. Description of Aerosol Dynamics by the Quadrature Method of Moments Aerosol Science and Technology 27 2 1997 255 265
- Hong , S. , Wooldridge , M.S. , Im , H.G. , Assanis , D.N. et al. Development and Application of a Comprehensive Soot Model for 3D CFD Reacting Flow Studies in a Diesel Engine Combustion and Flame 143 1-2 2005 11 26
- Zhong , B.J. , Dang , S. , Song , Y.N. , and Gong , J.S. 3-D Simulation of Soot Formation in a Direct-Injection Diesel Engine based on a Comprehensive Chemical Mechanism and Method of Moments Combustion Theory and Modelling 16 1 2012 143 171
- Wu , S. , Zhou , D. , and Yang , W. Implementation of an Efficient Method of Moments for Treatment of Soot Formation and Oxidation Processes in Three-Dimensional Engine Simulations Applied Energy 254 2019 113661
- Ibrahim , F. , Mahmood , W.M.F.W. , Abdullah , S. , and Mansor , M.R.A. Comparison of Simple and Detailed Soot Models in the Study of Soot Formation in a Compression Ignition Diesel Engine SAE Technical Paper 2017-01-1006 2017 https://doi.org/10.4271/2017-01-1006
- Karlsson , A. , Magnusson , I. , Balthasar , M. , and Mauss , F. Simulation of Soot Formation under Diesel Engine Conditions using a Detailed Kinetic Soot Model SAE Transactions 1998 1430 1440
- Wu , S. , Lao , C.T. , Akroyd , J. , Mosbach , S. et al. A Joint Moment Projection Method and Maximum Entropy Approach for Simulation of Soot Formation and Oxidation in Diesel Engines Applied Energy 258 2020 114083
- Saxena , M.R. and Maurya , R.K. Influence of Fuel Injection Pressure and Injection Timing on Nanoparticle Emission in Light-Duty Gasoline/Diesel RCCI Engine Particulate Science and Technology 39 5 2021 641 650
- Beale , J.C. and Reitz , R.D. Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model Atomization and Sprays 9 6 1999
- Abani , N. and Reitz , R.D. Unsteady Turbulent Round Jets and Vortex Motion Physics of Fluids 19 12 2007 125102
- Hou , S. and Schmidt , D.P. Adaptive Collision Meshing and Satellite Droplet Formation in Spray Simulations International Journal of Multiphase Flow 32 8 2006 935 956
- Ra , Y. and Reitz , R.D. A Vaporization Model for Discrete Multi-Component Fuel Sprays International Journal of Multiphase Flow 35 2 2009 101 117
- Han , Z. and Reitz , R.D. A Temperature Wall Function Formulation for Variable-Density Turbulent Flows with Application to Engine Convective Heat Transfer Modeling International Journal of Heat and Mass Transfer 40 3 1997 613 625
- Yakhot , V. and Orszag , S.A. Renormalization Group Analysis of Turbulence, I. Basic Theory Journal of Scientific Computing 1 1 1986 3 51
- Han , Z. and Reitz , R.D. Turbulence Modeling of Internal Combustion Engines using RNG κ-ε Models Combustion Science and Technology 106 4-6 1995 267 295
- Duan , X. , Xu , Z. , Sun , X. , Deng , B. et al. Effects of Injection Timing and EGR on Combustion and Emissions Characteristics of the Diesel Engine Fuelled with Acetone-Butanol-Ethanol/Diesel Blend Fuels Energy 231 2021 121069
- Li , X. , Xu , Z. , Guan , C. , and Huang , Z. Effect of Injection Timing on Particle Size Distribution from a Diesel Engine Fuel 134 2014 189 195
- He , C. , Ge , Y. , Tan , J. , You , K. et al. Characteristics of Polycyclic Aromatic Hydrocarbons Emissions of Diesel Engine Fueled with Biodiesel and Diesel Fuel 89 8 2010 2040 2046
- Appel , J. , Bockhorn , H. , and Frenklach , M. Kinetic Modeling of Soot Formation with Detailed Chemistry and Physics: Laminar Premixed Flames of C2 Hydrocarbons Combustion and Flame 121 1-2 2000 122 113
- Fenimore , C.P. and Jones , G.W. Oxidation of Soot by Hydroxyl Radicals The Journal of Physical Chemistry 71 3 1967 593 597
- Tao , F. et al. Nine-Step Phenomenological Diesel Soot Model Validated over a Wide Range of Engine Conditions International Journal of Thermal Sciences 48 6 2009 1223 1234