This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Simulation of Advanced Bipolar Plates Materials for Hydrogen-Fueled PEM Fuel Cell
Technical Paper
2022-01-0683
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Hydrogen-fueled Proton Exchange Membrane Fuel Cells (PEMFC) are considered one of the most promising technologies for a fully sustainable power generation in the transportation sector, thanks to the direct conversion of chemical-electrical energy, the absence of harmful emissions, the optimal power density, and the allowable long-distance driving range. A current technological issue preventing their large-scale industrialization is the thermal management of PEMFC stacks, due to the absence of the heat removal action operated by exhaust gases in internal combustion engines, the low-temperature generated heat and the limited exchange areas in mobile applications. A relevant role in heat dissipation is played by bipolar plates, being the components with the largest volume occupation and greatly contributing to the PEMFC weight and cost. This motivated the recent research on advanced materials for these components, aiming at simultaneous elevated electrical and thermal conductivity, reduced contact resistance, poor oxidation tendency and low density.
In this study a fundamental multi-dimensional and multi-physics 3D-CFD analysis is carried out to evaluate the effect on the membrane physical/electrochemical status for different types of bipolar plates, moving from conventional graphite to advanced materials, including coated stainless steel. A detailed analysis is carried out on the fuel cell thermal management, rationalizing the heat dissipation pathways and the membrane hydration balance for the considered cases. The study relevantly shows the effects of advanced research on bipolar plates materials on a cell-scale, filling a knowledge gap between the fundamental research on bulk material properties for bipolar plates and the resulting PEMFC fluid/thermal processes, thus providing guidelines for PEMFC engineering advancement.
Authors
Topic
Citation
D'Adamo, A. and Corda, G., "Numerical Simulation of Advanced Bipolar Plates Materials for Hydrogen-Fueled PEM Fuel Cell," SAE Technical Paper 2022-01-0683, 2022, https://doi.org/10.4271/2022-01-0683.Also In
References
- Barbir , F. PEM Fuel Cells: Theory and Practice 2nd Amsterdam, The Netherlands/Boston, MA Elsevier/Academic Press 2013
- Larminie , J. and Dicks , A. Fuel Cell Systems Explained Wiltshire John Wiley & Sons Ltd. 2003
- Wang , C.Y. Fundamental Models for Fuel Cell Engineering Chem. Rev. 104 2004 4727 4765 https://doi.org/10.1021/cr020718s
- Djilali , N. Computational Modelling of Polymer Electrolyte Membrane (PEM) Fuel Cells: Challenges and Opportunities Energy 32 2007 269 280 https://doi.org/10.1016/j.energy.2006.08.007
- Berning , T. and Djilali , N. A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell J. Electrochem. Soc. 150 2003 A1589 https://doi.org/10.1149/1.1621412
- Li , X. and Sabir , I. Review of Bipolar Plates in PEM fuel Cells: Flow-Field Designs International Journal of Hydrogen Energy 30 2005 359 371 https://doi.org/10.1016/j.ijhydene.2004.09.019
- Mehta , V. and Cooper , J.S. Review and Analysis of PEM Fuel Cell Design and Manufacturing Journal of Power Sources 114 1 32 53 https://doi.org/10.1016/S0378-7753(02)00542-6
- Cunningham , B. and Baird , D.G. The Development of Economical Bipolar Plates for Fuel Cells J. Mater. Chem. 16 2006 4385 4388 https://doi.org/10.1039/b611883f
- d’Adamo , A. , Haslinger , M. , Corda , G. , Höflinger , J. et al. Modelling Methods and Validation Techniques for CFD Simulations of PEM Fuel Cells Processes 9 2021 688 https://doi.org/10.3390/pr9040688
- Hermann , A. , Chaudhuri , T. , and Spagnol , P. Bipolar Plates for PEM Fuel Cells: A Review International Journal of Hydrogen Energy 30 12 2005 1297 1302 https://doi.org/10.1016/j.ijhydene.2005.04.016
- Cho , E.A. , Jeon , U.S. , Ha , H.Y. , Hong , S.A. et al. Characteristics of Composite Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells Journal of Power Sources 125 2004 178 182 https://doi.org/10.1016/j.jpowsour.2003.08.039
- Sadeghifar , H. , Djilali , N. , and Bahrami , M. Thermal Conductivity of a Graphite Bipolar Plate (BPP) and Its Thermal Contact Resistance with Fuel Cell Gas Diffusion Layers: Effect of Compression, PTFE, Micro Porous Layer (MPL), BPP Out-of-Flatness and Cyclic Load Journal of Power Sources 273 2015 96 104 http://doi.org/10.1016/j.jpowsour.2014.09.062
- Tawfik , H. , Hung , Y. , and Mahajan , D. Metal Bipolar Plates for PEM Fuel Cell—A Review Journal of Power Sources 163 2 2007 755 767 https://doi.org/10.1016/j.jpowsour.2006.09.088
- Karimi , S. , Fraser , N. , Roberts , B. , and Foulkes , F.R. A Review of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells: Materials and Fabrication Methods Advances in Materials Science and Engineering 2012 2012 22 https://doi.org/10.1155/2012/828070
- Wind , J. , Spah , R. , Kaiser , W. , and Bohm , G. Metallic Bipolar Plates for PEM Fuel Cells Journal of Power Sources 105 2002 256 260 https://doi.org/10.1016/S0378-7753(01)00950-8
- Liang , P. , Qiu , D. , Peng , L. , Yi , P. et al. Contact Resistance Prediction of Proton Exchange Membrane Fuel Cell Considering Fabrication Characteristics of Metallic Bipolar Plates Energy Conversion and Management 169 2018 334 344 https://doi.org/10.1016/j.enconman.2018.05.069
- Turan , C. , Cora , Ö.N. , and Koç , M. Contact Resistance Characteristics of Coated Metallic Bipolar Plates for PEM Fuel Cells—Investigations on the Effect of Manufacturing International Journal of Hydrogen Energy 37 23 2012 18187 18204 https://doi.org/10.1016/j.ijhydene.2012.09.042
- Cunningham , B.D. , Huang , J. , and Baird , D.G. Development of Bipolar Plates for Fuel Cells from Graphite Filled Wet-Lay Material and a Thermoplastic Laminate Skin Layer Journal of Power Sources 165 2007 764 773 https://doi.org/10.1016/j.jpowsour.2006.12.035
- Du , L. and Jana , S.C. Highly Conductive Epoxy/Graphite Composites for Bipolar Plates in Proton Exchange Membrane Fuel Cells Journal of Power Sources 172 2 2007 734 741 https://doi.org/10.1016/j.jpowsour.2007.05.088
- Jeong , K. , Oh , J. , Song , S.A. , Lee , D. et al. A Review of Composite Bipolar Plates in Proton Exchange Membrane Fuel Cells: Electrical Properties and Gas Permeability Composite Structures 262 2021 113617 https://doi.org/10.1016/j.compstruct.2021.113617
- Kakati , B.K. , Sathiyamoorthy , D. , and Verma , A. Electrochemical and Mechanical Behavior of Carbon Composite Bipolar Plate for Fuel Cell International Journal of Hydrogen Energy 35 2010 4185 4194 https://doi.org/10.1016/j.ijhydene.2010.02.033
- Roncaglia , F. , Romagnoli , M. , Incudini , S. , Santini , E. et al. Graphite-Epoxy Composites for Fuel-Cell Bipolar Plates: Wet vs Dry Mixing and Role of the Design of Experiment in the Optimization of Molding Parameters International Journal of Hydrogen Energy 46 2021 4407 4416 https://doi.org/10.1016/j.ijhydene.2020.10.272
- Jiao , K. and Li , X. Water Transport in Polymer Electrolyte Membrane Fuel Cells Prog. Energy Combust. Sci. 37 2011 221 291 https://doi.org/10.1016/j.pecs.2010.06.002
- d'Adamo , A. , Riccardi , M. , Locci , C. , Romagnoli , M. et al. Numerical Simulation of a High Current Density PEM Fuel Cell SAE Technical Paper 2020-24-0016 2020 https://doi.org/10.4271/2020-24-0016
- d’Adamo , A. , Riccardi , M. , Borghi , M. , and Fontanesi , S. CFD Modelling of a Hydrogen/Air PEM Fuel Cell with a Serpentine Gas Distributor Processes 9 2021 564 https://doi.org/10.3390/pr9030564
- Springer , T.E. , Zawodzinski , S. , and Gottesfeld , S. Polymer Electrolyte Fuel Cell Model J. Electrochem. Soc. 138 1991 2334 https://doi.org10.1149/1.2085971
- Carcadea , E. , Ingham , D. , Stefanescu , I. , Ionete , R. et al. The Influence of Permeability Changes for a 7-Serpentine Channel PEM Fuel Cell Performance Int. J. Hydrog. Energy 36 2011 10376 10383 https://doi.org/10.1016/j.ijhydene.2010.09.050
- Taccani , R. and Zuliani , N. Effect of Flow Field Design on Performances of High Temperature PEM Fuel Cells: Experimental Analysis Int. J. Hydrog. Energy 36 2011 10282 10287 https://doi.org/10.1016/j.ijhydene.2010.10.026