This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A 3D-CFD Methodology for Combustion Modeling in Active Prechamber SI Engines Operating with Natural Gas
Technical Paper
2022-01-0470
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Active prechamber combustion systems for SI engines represent a feasible and effective solution in reducing fuel consumption and pollutant emissions for both marine and ground heavy-duty engines. However, reliable and low-cost numerical approaches need to be developed to support and speed-up their industrial design considering their geometry complexity and the involved multiple flow length scales. This work presents a CFD methodology based on the RANS approach for the simulation of active prechamber spark-ignition engines. To reduce the computational time, the gas exchange process is computed only in the prechamber region to correctly describe the flow and mixture distributions, while the whole cylinder geometry is considered only for the power-cycle (compression, combustion and expansion). Outside the prechamber the in-cylinder flow field at IVC is estimated from the measured swirl ratio. A flame area evolution model combined with a deposition ignition model is used to describe the flame propagation process. Experimental data from a single-cylinder engine were used to validate the proposed approach. Different operating conditions were considered, to evaluate the effects of an increasingly lean mixture inside the main chamber, as well as the impact of a load variation. Comparison between computed and experimental data of in-cylinder pressure and heat release rate allowed to assess the capability of the modelling strategy in capturing the different phases of the combustion process originating by turbulent jet ignition.
Recommended Content
Authors
Topic
Citation
Sforza, L., Lucchini, T., Gianetti, G., D'Errico, G. et al., "A 3D-CFD Methodology for Combustion Modeling in Active Prechamber SI Engines Operating with Natural Gas," SAE Technical Paper 2022-01-0470, 2022, https://doi.org/10.4271/2022-01-0470.Also In
References
- Attard , W.P. and Parsons , P. A Normally Aspirated Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero Nox Emissions in a Modern Vehicle Powertrain SAE International Journal of Engines 3 2 2010 269 287
- Toulson , E. , Watson , H.C. , and Attard , W.P. 2009
- Shiraishi , T. , Teraji , A. , and Moriyoshi , Y. The Effects of Ignition Environment and Discharge Waveform Characteristics on Spark Channel Formation and Relationship Between the Discharge Parameters and the Egr Combustion Limit SAE International Journal of Engines 9 1 2015 171 178
- Ju , Y. and Sun , W. Plasma Assisted Combustion: Dynamics and Chemistry Progress in Energy and Combustion Science 48 2015 21 83
- Alvarez , C.E.C. , Couto , G.E. , Roso , V.R. , Thiriet , A.B. et al. A Review of Prechamber Ignition Systems as Lean Combustion Technology for SI Engines Applied Thermal Engineering 128 2018 107 120
- Shah , A. , Tunestal , P. , and Johansson , B. Effect of Pre-Chamber Volume and Nozzle Diameter on Pre-Chamber Ignition in Heavy Duty Natural Gas Engines SAE Technical Paper 2015-01-0867 2015 https://doi.org/10.4271/2015-01-0867
- Toulson , E. , Huisjen , A. , Chen , X. , Squibb , C. et al. Visualization of Propane and Natural Gas Spark Ignition and Turbulent Jet Ignition Combustion SAE International Journal of Engines 5 4 2012 1821 1835
- Toulson , E. , Watson , H. , and Attard , W. Modeling Alternative Prechamber Fuels in Jet Assisted Ignition of Gasoline and LPG SAE Technical Paper 2009-01-0721 2009 https://doi.org/10.4271/2009-01-0721
- Gentz , G. , Thelen , B. , Gholamisheeri , M. , Litke , P. et al. A Study of the Influence of Orifice Diameter on a Turbulent Jet Ignition System Through Combustion Visualization and Performance Characterization in a Rapid Compression Machine Applied Thermal Engineering 81 2015 399 411
- Yamaguchi , S. , Ohiwa , N. , and Hasegawa , T. Ignition and Burning Process in a Divided Chamber Bomb Combustion and Flame 59 2 1985 177 187
- Biswas , S. , Tanvir , S. , Wang , H. , and Qiao , L. On Ignition Mechanisms of Premixed ch4/air and h2/air Using a Hot Turbulent Jet Generated by Pre-chamber Combustion Applied Thermal Engineering 106 2016 925 937
- Zhou , L. , Liu , P. , Zhong , L. , Feng , Z. et al. Experimental Observation of Lean Flammability Limits Using Turbulent Jet Ignition with Auxiliary Hydrogen and Methane in Pre-Chamber Fuel 305 2021
- Attard , W.P. and Parsons , P. Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable Of High Load, High Efficiency and Near Zero Nox Emissions SAE International Journal of Engines 3 2 2010 408 427
- Atis , C. and Schock , H. Comparison of Excess Air (Lean) vs Egr Diluted Operation in a Pre-Chamber Air/Fuel Scavenged Dual Mode, Turbulent Jet Ignition Engine at High Dilution Rate (40%) SAE International Journal of Advances and Current Practices in Mobility 3 4 2021 1569 1584
- Soltic , P. , Hilfiker , T. , and Hänggi , S. Efficient Light-Duty Engine Using Turbulent Jet Ignition of Lean Methane Mixtures International Journal of Engine Research 22 4 2021 1301 1311
- Soltic , P. and Hilfiker , T. Efficiency and Raw Emission Benefits from Hydrogen Addition to Methane in a Prechamber†Equipped Engine International Journal of Hydrogen Energy 45 43 2020 23638 23652
- Shah , A. , Tunestal , P. , and Johansson , B. Scalability Aspects of Pre-Chamber Ignition in Heavy Duty Natural Gas Engines SAE 2016 World Congress and Exhibition SAE International 2016
- De La Morena , J. , Garcia , A. , Li , C. , Valladolid , P.G. , Tunestal , P. , Onofrio , G. , and Beatrice , C. Experimental and Numerical Assessment of Active Pre-Chamber Ignition in Heavy Duty Natural Gas Stationary Engine WCX SAE World Congress Experience SAE International apr 2020
- Baumgartner , L.S. , Wohlgemuth , S. , Zirngibl , S. , and Wachtmeister , G. Investigation of a Methane Scavenged Prechamber for Increased Efficiency of a Lean-Burn Natural Gas Engine for Automotive Applications SAE International Journal of Engines 8 2 2015 921 933
- Zhang , Q. , Xian , K. , and Li , M. Investigation of Performance and Emission Characteristics on a Large-Bore Spark-Ignition Natural Gas Engine with Scavenged Prechamber and Miller Cycle Attribute Journal of Energy Engineering 143 5 2017
- Xu , G. , Kotzagianni , M. , Kyrtatos , P. , Wright , Y.M. et al. Experimental and Numerical Investigations of the Unscavenged Prechamber Combustion in a Rapid Compression and Expansion Machine Under Engine-Like Conditions Combustion and Flame 204 2019 68 84
- Gholamisheeri , M. , Wichman , I.S. , and Toulson , E. A Study of the Turbulent Jet Flow Field in a Methane Fueled Turbulent Jet Ignition (tji) System Combustion and Flame 183 2017 194 206
- Tanamura , M. , Nakai , S. , Nakatsuka , M. , Taki , S. et al. A Fundamental Study on Combustion Characteristics in a Pre-Chamber Type Lean Burn Natural Gas Engine SAE Technical Paper 2019-24-0123 2019 https://doi.org/10.4271/2019-24-0123
- Olcuire , M. , Iacovano , C. , D’Adamo , A. , Breda , S. et al. Combustion Modelling of Turbulent Jet Ignition in a Divided Combustion Chamber International Journal of Engine Research 2021
- Millo , F. , Rolando , L. , Piano , A. , Sementa , P. et al. Experimental and Numerical Investigation of a Passive Pre-Chamber Jet Ignition Single-Cylinder Engine Number 2021 2021
- Kim , J. , Scarcelli , R. , Som , S. , Shah , A. et al. Assessment of Turbulent Combustion Models for Simulating Prechamber Ignition in a Natural Gas Engine Journal of Engineering for Gas Turbines and Power 143 9 2021
- Lucchini , T. , Della Torre , A. , D’Errico , G. , Montenegro , G. et al. Automatic Mesh Generation for CFD Simulations of Direct-Injection Engines SAE Technical Paper 2015-01-0376 2015 https://doi.org/10.4271/2015-01-0376
- Weller , H.G. , Tabor , G. , Gosman , A.D. , and Fureby , C. Application of a Flame Wrinkling LES Combustion Model to a Turbulent Mixing Layer Proceedings the Twenty-Seventh Symposium on Combustion, The Combustion Institute 899 907 1998
- Lucchini , T. , D'Errico , G. , Paredi , D. , Sforza , L. et al. CFD Modeling of Gas Exchange, Fuel-Air Mixing and Combustion in Gasoline Direct-Injection Engines SAE Technical Paper 2019-24-0095 2019 https://doi.org/10.4271/2019-24-0095
- Peters , N. Turbulent Combustion Cambridge University Press 2000
- Sforza , L. , Lucchini , T. , Gianetti , G. , and D'Errico , G. Development and Validation of SI Combustion Models for Natural-Gas Heavy-Duty Engines SAE Technical Paper 2019-24-0096 2019 https://doi.org/10.4271/2019-24-0096
- Kim , J. , Scarcelli , R. , Som , S. , Shah , A. et al. Numerical Investigation of a Fueled Pre-Chamber Spark-Ignition Natural Gas Engine International Journal of Engine Research 2021
- Weller , H.G. The Development of a New Flame Area Combustion Model Using Conditional Averaging Thermo-Fluids Section Report TF 9307, Imperial College of Science, Technology and Medicine 1993
- Weller , H.G. , Tabor , G. , Gosman , A.D. , and Fureby , C. Application of a Flame-Wrinkling LES Combustion Model to a Turbulent Mixing Layer Proceedings of the Twenty-Seventh Combustion Symposium (International) 899 907 1998
- Yang , X. , Solomon , A. , and Kuo , T. Ignition and Combustion Simulations of Spray-Guided SIDI Engine using Arrhenius Combustion with Spark-Energy Deposition Model SAE Technical Paper 2012-01-0147 2012 https://doi.org/10.4271/2012-01-0147
- Maly , R.R. and Herweg , R. A Fundamental Model for Flame Kernel Formation in SI Engines SAE Technical Paper 922243 1992 https://doi.org/10.4271/922243
- Bray , K.N.C. 1990
- Smith , G.P. , Golden , D.M. , Frenklach , M. , Moriarty , N.W. , et al. http://www.me.berkeley.edu/grimech/
- Lucchini , T. , D’Errico , G. , Onorati , A. , Frassoldati , A. et al. Modeling Non-Premixed Combustion Using Tabulated Kinetics and Different Flame Structure Assumptions SAE International Journal of Engines 2 10 2017 593 607
- Lucchini , T. , D’Errico , G. , Onorati , A. , Bonandrini , G. et al. Development and Application of a Computational Fluid Dynamics Methodology to Predict Fuel-Air Mixing and Sources of Soot Formation in Gasoline Direct Injection Engines International Journal of Engine Research 15 5 2014 581 596