This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluation of Equivalent Temperature in Vehicle Cabin by a Mesh-Free Simulation—Part 3: Evaluation of Equivalent Temperature under Transient Heating Condition
Technical Paper
2022-01-0192
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes the equivalent temperature based on the mesh-free simulation proposed by the previous papers (Part1 and Part2) under the transient heating condition in a 3D-CAD vehicle cabin including the thermal manikin which takes into account the clothing shape. For this purpose, firstly, the experiments of vehicle cabin measuring for the thermal environment including the equivalent temperature are carried out under the transient heating condition. Then, the calculated results of the thermal environment in the vehicle cabin are compared with time series experimental data under the transient condition. They correspond to the experiments including transient changes well. The transient calculated equivalent temperature of thermal manikin is also compared with experiments. As a result, since it is difficult to control the thermal manikin ideally in the experiment, it is difficult to compare the transient behavior. In particular, it is difficult to measure the amount of heat loss from the thermal manikin at the early stage of transient heating in the experiment. On the other hand, in the analysis, the thermal manikin can be controlled ideally so that the equivalent temperature can be evaluated including the transient condition. In this way, some differences between the actual phenomenon and the ideal situation can be confirmed under the transient behavior of the thermal manikin. Furthermore, effects of heat capacity of the clothing on the equivalent temperature are also studied. The behavior of the equivalent temperature calculated by the three types of setting methods for the heat capacity is different on the body segment of the thermal manikin of which heat capacity is large at the early stage of transient heating.
Recommended Content
| Technical Paper | The Analysis and Mechanism of Engine ‘Intake Rumbling Noise’ |
| Technical Paper | Windshield Defogging Simulation with Comparison to Test Data |
| Technical Paper | Cool Down Analysis of an HVAC System Using Multi-Zone Cabin Approach |
Authors
Topic
Citation
Ozeki, Y., Oi, H., Matsumoto, A., Kondo, R. et al., "Evaluation of Equivalent Temperature in Vehicle Cabin by a Mesh-Free Simulation—Part 3: Evaluation of Equivalent Temperature under Transient Heating Condition," SAE Technical Paper 2022-01-0192, 2022, https://doi.org/10.4271/2022-01-0192.Also In
References
- ISO
- ISO
- Nilsson , H.O. 2004
- Hepokoski , M. , Curran , A. , and Schwenn , T.
- Chen , K.H. , Kaushik , S. , Han , T. , Ghosh , D. et al.
- Kaushik , S. , Han , T. , and Chen , K.H.
- Daithankar , N. , Udawant , K. , and Karanth , N.
- Lorenz , M. , Fiala , D. , Spinnler , M. , and Sattelmayer , T.
- Stancato , F.
- Ghosh , D. , Wang , M. , Chen , K.H. , Kaushik , S. et al.
- Stancato , F. , Conceicao , S. , Papa , R. , and Santos , L.
- Oi , H. , Ozeki , Y. , Suzuki , S. Ichikawa , Y. et al.
- Ozeki , Y. , Oi , H. , Ichikawa , Y. , Matsumoto , A. et al.
- Lotens , W.A. and Havenith , G. Effects of Moisture Absorption in Clothing on the Human Heat Balance Ergonomics 38 6 1994 1092 1113
- Wada , R. , Sato , T. , and Tanabe , S. Numerical Comfort Simulator for Thermal Environment (Part 28-29), Development of Human Thermoregulation Model REAL—Effects of Moisture Absorption in Clothing Proc. of the Architectural Institute of Japan D2 2004 515 518