This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Injection Parameters on Particulate Matter Emission in a Direct Injection Gasoline Engine
Technical Paper
2021-01-0628
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
PN(Particle Number) emission limits are more stringent for gasoline vehicles in Chinese VI emission standards (6×1011 #/km). A EEPS engine exhaust particle size spectrometer was employed to characterize the effects of injection strategies on particulates emissions from a turbocharged gasoline direct injection (GDI) engine. The effects of operating parameters (injection pressure, second injection ratio and second injection end time) on particle diameter distribution and particle number density of emission was Investigated. The experimental result indicates that the quantity of particles decrease with the increase of injection pressure obviously, especially at high load including the 20% reduction of the particle number density. When the engine is at low load, the accumulation mode particle emissions are higher than the nucleation mode particle emissions compared with high load, which present opposite results. The second injection can restrain engine knock at low speed. With the increase of second injection ratio, the particle number density decreases initially and increases afterwards. The number of nucleation mode particle number density is relatively stable with the delay of the second injection end time. The accumulation mode particle number density decreases initially and increase afterwards. The optimal particle emission characteristic is obtained at an injection ratio of 8:2, with second injection end time of 70°CA.
Recommended Content
Authors
Topic
Citation
Lou, D., Wang, T., Fang, L., Xu, Z. et al., "Effect of Injection Parameters on Particulate Matter Emission in a Direct Injection Gasoline Engine," SAE Technical Paper 2021-01-0628, 2021, https://doi.org/10.4271/2021-01-0628.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Costa , M. et al. Split Injection in a Homogeneous Stratified Gasoline Direct Injection Engine for High Combustion Efficiency and Low Pollutants Emission Energy 117 405 415 2016
- Leach , F. et al. A Review of the Requirements for Injection Systems and the Effects of Fuel Quality on Particulate Emissions from GDI Engines SAE Technical Paper Series 2018 https://doi.org/10.4271/2018-01-1710
- Limits and Measurement Methods for Emissions from Light-duty Vehicles(CHINA 6) Ministry of Environmental Protection of China 2016
- Raza , M. et al. A Review of Particulate Number (PN) Emissions from Gasoline Direct Injection (GDI) Engines and Their Control Techniques Energies 11 6 1417 2018
- Karavalakis , G. et al. The Impact of Ethanol and Iso-butanol Blends on Gaseous and Particulate Emissions from Two Passenger Cars Equipped with Spray-guided and Wall-guided Direct Injection SI (spark ignition) Engines Energy 82 168 179 2015
- Chen , L. et al. Characterizing Particulate Matter Emissions from GDI and PFI Vehicles Under Transient and Cold Start Conditions Fuel 189 131 140 2017
- Fatouraie , M. et al. Effects of Ethanol on In-Cylinder and Exhaust Gas Particulate Emissions of a Gasoline Direct Injection Spark Ignition Engine Energy & Fuels 29 5 3399 3412 2015
- He , X. , Ratcliff , M.A. , and Zigler , B.T. Effects of Gasoline Direct Injection Engine Operating Parameters on Particle Number Emissions Energy & Fuels 26 4 2014 2027 2012
- Su , C. et al. Model-Based Approaches in Developing an Advanced Aftertreatment System: An Overview SAE Technical Paper Series 2019 https://doi.org/10.4271/2019-01-0026
- Sharma , N. , and Agarwal , A.K. Effect of the Fuel Injection Pressure on Particulate Emissions from a Gasohol (E15 and M15)-Fueled Gasoline Direct Injection Engine Energy & Fuels 31 4 4155 4164 2017
- Duleep , K.G. The Impact of Gasoline Direct Injection System Design on PM Emissions SAE Technical Paper 2019-01-0072 2019 https://doi.org/10.4271/2019-01-0072
- Choi , K. et al. Effect of the Mixture Preparation on the Nanoparticle Characteristics of Gasoline Direct-injection Vehicles Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 226 11 1514 1524 2012
- Bonatesta , F. , Chiappetta , E. , and La Rocca , A. Part-load Particulate Matter from a GDI Engine and the Connection with Combustion Characteristics Applied Energy 124 366 376 2014
- Farron , C. et al. Particulate Characteristics for Varying Engine Operation in a Gasoline Spark Ignited, Direct Injection Engine SAE Technical Paper Series 2011 https://doi.org/10.4271/2011-01-1220
- Wang , Y.-J. , et al. Study of Injection Strategies of Two-stage Gasoline Direct Injection (TSGDI) Combustion System SAE World Congress 2005 Detroit, Michigan 2005-01-0107
- Seong , H. , Lee , K. , and Choi , S. Effects of Engine Operating Parameters on Morphology of Particulates from a Gasoline Direct Injection (GDI) Engine SAE Technical Paper Series 2013 https://doi.org/10.4271/2013-01-2574
- Su , J. et al. Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine SAE International Journal of Engines 8 1 20 29 2014 https://doi.org/10.4271/2014-01-2845
- Hoffmann , G. et al. Fuel System Pressure Increase for Enhanced Performance of GDi Multi-Hole Injection Systems SAE Int J Engines 2014-01-1209 2014 https://doi.org/10.4271/2014-01-1209
- Piock , W.F. , et al. Fuel Pressure and Charge Motion Effects on GDi Engine Particulate Emissions SAE Int J Engines 2015 2015-01-0746 https://doi.org/10.4271/2015-01-0746
- Oh , H. et al. Effect of the Multiple Injection on Stratified Combustion Characteristics in a Spray-Guided DISI Engine SAE Technical Paper Series 2011 https://doi.org/10.4271/2011-24-0059
- Pei , Y.-Q. , Qin , J. , and Pan , S.-Z. Experimental Study on the Particulate Matter Emission Characteristics for a Direct-injection Gasoline Engine Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 228 6 604 616 2014
- Chung , J. et al. Study on the Effect of Injection Strategies on Particulate Emission Characteristics under Cold Start Using In-cylinder Visualization SAE Technical Paper Series 2016 https://doi.org/10.4271/2016-01-0822
- Yao , D. et al. Experimental Investigation on Particle Number and Size Distribution of a Common Rail Diesel Engine Fueling with Alternative Blended Diesel Fuels SAE Technical Paper Series 2011 https://doi.org/10.4271/2011-01-0620