This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Qualitative Comparison of the Macroscopic Spray Characteristics of Gasoline Mixtures and their Multi-Component Surrogates Using a Rapid Compression Machine
Technical Paper
2021-01-0558
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
Rapid Compression Machines (RCM) offer the ability to easily change the compression ratio and the pressure/mixture composition/temperature to gather ignition delay data at various engine relevant conditions. Therefore, RCMs with optical access to the combustion chamber can provide an effective way to analyze macroscopic spray characteristics needed to understand the spray injection process and for spray model development, validation and calibration at conditions that are suitable for engines. Fuel surrogates can help control fuel parameters, develop models for spray and combustion, and perform laser diagnostics with known fluorescence characteristics. This study quantifies and evaluates the macroscopic spray characteristics of multicomponent gasoline surrogates in comparison to their gasoline counterparts, under gasoline direct injection (GDI) engine conditions. Using a RCM to compress air and injecting fuel with no tracer doping, 5 ms after TDC helps emulate engine like conditions and studying the development of spray in such conditions can provide insights that other systems typically used for spray studies cannot. Experiments were carried out at 10 bar and 20 bar compressed pressures, over a temperature range of 650 K-825 K and at 2 injection pressures of 30 bar and 100 bar. A 7-hole production GDI injector was used for both gasoline fuels, which differed in their mixture composition and RON rating, namely Low RON fuel and High RON fuel, and their corresponding multi-component surrogates. A Photron SA4 high speed camera along with a 105 mm, 1:2.8G, AF-S Micro Nikkor lens was used for the high-speed imaging of the injection process and no wavelength filter or laser excitation was used. The high-speed images were analyzed to determine the spray tip penetration lengths, spray tip velocities and projected areas of the sprays with the results indicating that the fuel surrogates were representative of their equivalent target fuels at various operating conditions.
Authors
Topic
Citation
Wadkar, C., Chinnathambi, P., Gudiyella, S., Zhong, L. et al., "A Qualitative Comparison of the Macroscopic Spray Characteristics of Gasoline Mixtures and their Multi-Component Surrogates Using a Rapid Compression Machine," SAE Technical Paper 2021-01-0558, 2021, https://doi.org/10.4271/2021-01-0558.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Liang , B. , Ge , Y. , Tan , J. , Han , X. et al. Comparison of PM Emissions from a Gasoline Direct Injected (GDI) Vehicle and a Port Fuel Injected (PFI) Vehicle Measured by Electrical Low Pressure Impactor (ELPI) with Two Fuels: Gasoline and M15 Methanol Gasoline Journal of Aerosol Science 57 22 31 2013 10.1016/j.jaerosci.2012.11.008
- Chen , L. , Liang , Z. , Zhang , X. , and Shuai , S. Characterizing Particulate Matter Emissions from GDI and PFI Vehicles under Transient and Cold Start Conditions Fuel 189 131 140 2017 10.1016/j.fuel.2016.10.055
- Khalek , I.A. , Bougher , T. , and Jetter , J.J. Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available Fuels SAE International Journal of Fuels and Lubricants 3 2 623 637 2010 https://doi.org/10.4271/2010-01-2117
- Sarathy , S.M. , Kukkadapu , G. , Mehl , M. , Wang , W. et al. Ignition of Alkane-Rich FACE Gasoline Fuels and their Surrogate Mixtures Proceedings of the Combustion Institute 35 1 249 257 2015 10.1016/j.proci.2014.05.122
- Tang , M. , Zhao , L. , Naber , J. , and Lee , S.-Y. Diesel Fuel Surrogate for Spray and Combustion Investigations 9th U.S. National Combustion Meeting Cincinnati 2015
- Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill 1988
- Lovell , W.G. Knocking Characteristics of Hydrocarbons Industrial & Engineering Chemistry 40 12 2388 2438 1948 10.1021/ie50468a033
- Schulz , C. and Sick , V. Tracer-LIF Diagnostics: Quantitative Measurement of Fuel Concentration, Temperature and Fuel/Air Ratio in Practical Combustion Systems Progress in Energy and Combustion Science 31 1 75 121 2005 10.1016/j.pecs.2004.08.002
- Drake , M.C. , Fansler , T.D. , and French , D.T. Crevice Flow and Combustion Visualization in a Direct-Injection Spark-Ignition Engine Using Laser Imaging Techniques 1995 https://doi.org/10.4271/952454
- Hentschel , W. , Block , B. , Hovestadt , T. , Meyer , H. , Ohmstede , G. , Richter , V. , Stiebels , B. , and Winkler , A. Optical Diagnostics and CFD-Simulations to Support the Combustion Process Development of the Volkswagen FSI® Direct-Injection Gasoline Engine 2001 https://doi.org/10.4271/2001-01-3648
- Fröba , A.P. , Rabenstein , F. , Münch , K.-U. , and Leipertz , A. Mixture of Triethylamine (TEA) and Benzene as a New Seeding Material for the Quantitative Two-Dimensional Laser-Induced Exciplex Fluorescence Imaging of Vapor and Liquid Fuel Inside SI Engines Combustion and Flame 112 1-2 199 209 1998 10.1016/S0010-2180(97)81768-3
- Fansler , T.D. , Drake , M.C. , Gajdeczko , B. , Düwel , I. et al. Quantitative Liquid and Vapor Distribution Measurements in Evaporating Fuel Sprays Using Laser-Induced Exciplex Fluorescence Measurement Science and Technology 20 12 125401 2009 10.1088/0957-0233/20/12/125401
- Yeom , J. , Chung , S. , Ha , J. , Kim , Y. , and Min , K. A Study on the Behavior of Evaporating Diesel Spray Using LIEF Measurement and Kiva Code KSME International Journal 18 12 2310 2318 2004 10.1007/BF02990236
- Melton , L.A. Spectrally Separated Fluorescence Emissions for Diesel Fuel Droplets and Vapor Applied Optics 22 14 2224 1983 10.1364/AO.22.002224
- Desantes , J.M. , Pastor , J.V. , Pastor , J.M. , and Juliá , J.E. Limitations on the use of the Planar Laser Induced Exciplex Fluorescence Technique in Diesel Sprays Fuel 84 18 2301 2315 2005 10.1016/j.fuel.2005.05.009
- Mueller , C.J. , Cannella , W.J. , Bays , J.T. , Bruno , T.J. et al. Diesel Surrogate Fuels for Engine Testing and Chemical-Kinetic Modeling: Compositions and Properties Energy & Fuels 30 2 1445 1461 2016 10.1021/acs.energyfuels.5b02879
- Mueller , C.J. , Cannella , W.J. , Bruno , T.J. , Bunting , B. et al. Methodology for Formulating Diesel Surrogate Fuels with Accurate Compositional, Ignition-Quality, and Volatility Characteristics Energy & Fuels 26 6 3284 3303 2012 10.1021/ef300303e
- Scholz , J. , Wiersbinski , T. , and Beushausen , V. Planar Fuel-Air-Ratio-LIF with Gasoline for Dynamic Mixture-Formation Investigations 2007 https://doi.org/10.4271/2007-01-0645
- Stevens , R.E. , Ma , H. , Stone , C.R. , Walmsley , H.L. , and Cracknell , R. On Planar Laser-Induced Fluorescence with Multi-Component Fuel and Tracer Design for Quantitative Determination of Fuel Concentration in Internal Combustion Engines Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 221 6 713 724 2007 10.1243/09544070JAUTO162
- Williams , B. , Ewart , P. , Wang , X. , Stone , R. et al. Quantitative Planar Laser-Induced Fluorescence Imaging of Multi-Component Fuel/Air Mixing in a Firing Gasoline-Direct-Injection Engine: Effects of Residual Exhaust Gas on Quantitative PLIF Combustion and Flame 157 10 1866 1878 2010 10.1016/j.combustflame.2010.06.004
- Styron , J.P. , Kelly-Zion , P.L. , Lee , C.F. , Peters , J.E. et al. Multicomponent Liquid and Vapor Fuel Distribution Measurements in the Cylinder of a Port-Injected, Spark-Ignition Engine 2000 10.4271/2000-01-0243
- Ma , X. , He , X. , Wang , J. , and Shuai , S. Co-Evaporative Multi-Component Fuel Design for in-Cylinder PLIF Measurement and Application in Gasoline Direct Injection Research Applied Energy 88 8 2617 2627 2011 10.1016/j.apenergy.2011.01.043
- Yu , X. , Luo , X. , Jansons , M. , Kim , D. et al. A Fuel Surrogate Validation Approach Using a JP-8 Fueled Optically Accessible Compression Ignition Engine SAE International Journal of Fuels and Lubricants 8 1 119 134 2015 https://doi.org/10.4271/2015-01-0906
- Zheng , Z. , Lee , P.-I. , Shrestha , A. , Badawy , T. et al. Role of Volatility in the Development of JP-8 Surrogates for Diesel Engine Application SAE International Journal of Fuels and Lubricants 7 1 116 130 2014 https://doi.org/10.4271/2014-01-1389
- Tang , M. , Zhang , J. , Zhu , X. , Yeakle , K. et al. Comparison of Direct-Injection Spray Development of E10 Gasoline to a Single and Multi-Component E10 Gasoline Surrogate SAE International Journal of Fuels and Lubricants 10 2 2017 https://doi.org/10.4271/2017-01-0833
- Mittal , G. , Raju , M.P. , and Sung , C.-J. Vortex Formation in a Rapid Compression Machine: Influence of Physical and Operating Parameters Fuel 94 409 417 2012 10.1016/j.fuel.2011.08.034
- Allen , C. Advanced Rapid Compression Machine Test Methods and Surrogate Fuel Modeling for Bio-Derived Jet and Diesel Fuel Autoignition Michigan State University 2012
- Gentz , G. , Thelen , B. , Litke , P. , Hoke , J. , and Toulson , E. Combustion Visualization, Performance, and CFD Modeling of a Pre-Chamber Turbulent Jet Ignition System in a Rapid Compression Machine SAE International Journal of Engines 8 2 538 546 2015 https://doi.org/10.4271/2015-01-0779
- Gentz , G.R. and Toulson , E. Experimental Studies of a Liquid Propane Auxiliary Fueled Turbulent Jet Igniter in a Rapid Compression Machine SAE International Journal of Engines 9 2 2016 https://doi.org/10.4271/2016-01-0708
- Chinnathambi , P. , Thelen , B. , Naylor , M. , Cook , D. , and Toulson , E. Performance Assessment of a Single Jet, Dual Diverging Jets, and Dual Converging Jets in an Auxiliary Fueled Turbulent Jet Ignition System 2018 https://doi.org/10.4271/2018-01-1135
- Allen , C. , Mittal , G. , Sung , C.-J. , Toulson , E. , and Lee , T. An Aerosol Rapid Compression Machine for Studying Energetic-Nanoparticle-Enhanced Combustion of Liquid Fuels Proceedings of the Combustion Institute 33 2 3367 3374 2011 10.1016/j.proci.2010.06.007
- Allen , C. , Toulson , E. , Edwards , T. , and Lee , T. Application of a Novel Charge Preparation Approach to Testing the Autoignition Characteristics of JP-8 and Camelina Hydroprocessed Renewable Jet Fuel in a Rapid Compression Machine Combustion and Flame 159 9 2780 2788 2012 10.1016/j.combustflame.2012.03.019
- Chinnathambi , P. , Wadkar , C. , Amit , S. , Soumya , G. , Estefanous , A. , Lurun , Z. , and Toulson , E. Impact of CO2 Dilution on Ignition Delay Times of Full Blend Gasolines in a Rapid Compression Machine
- Mittal , G. and Sung , C.-J. Aerodynamics Inside a Rapid Compression Machine Combustion and Flame 145 1-2 160 180 2006 10.1016/j.combustflame.2005.10.019
- Griffiths , J.F. , Jiao , Q. , Schreiber , M. , Meyer , J. , and Knoche , K.F. Development of Thermokinetic Models for Autoignition in a CFD Code: Experimental Validation and Application of the Results to Rapid Compression Studies Symposium (International) on Combustion 24 1 1809 1815 1992 10.1016/S0082-0784(06)80212-2
- Mittal , G. and Sung , C.-J. A Rapid Compression Machine for Chemical Kinetics Studies at Elevated Pressures and Temperatures Combustion Science and Technology 179 3 497 530 2007 10.1080/00102200600671898
- Mittal , G. , Sung , C.-J. , and Yetter , R.A. Autoignition of H2/CO at Elevated Pressures in a Rapid Compression Machine International Journal of Chemical Kinetics 38 8 516 529 2006 10.1002/kin.20180
- Mittal , G. and Sung , C.-J. Autoignition of Toluene and Benzene at Elevated Pressures in a Rapid Compression Machine Combustion and Flame 150 4 355 368 2007 10.1016/j.combustflame.2007.04.014
- Mittal , G. , Chaos , M. , Sung , C.-J. , and Dryer , F.L. Dimethyl Ether Autoignition in a Rapid Compression Machine: Experiments and Chemical Kinetic Modeling Fuel Processing Technology 89 12 1244 1254 2008 10.1016/j.fuproc.2008.05.021
- Kumar , K. , Mittal , G. , and Sung , C.-J. Autoignition of n-Decane Under Elevated Pressure and Low-to-Intermediate Temperature Conditions Combustion and Flame 156 6 1278 1288 2009 10.1016/j.combustflame.2009.01.009
- Mittal , G. and Sung , C.-J. Autoignition of Methylcyclohexane at Elevated Pressures Combustion and Flame 156 9 1852 1855 2009 10.1016/j.combustflame.2009.05.009
- Lee , D. and Hochgreb , S. Rapid Compression Machines: Heat Transfer and Suppression of Corner Vortex Combustion and Flame 114 3-4 531 545 1998 10.1016/S0010-2180(97)00327-1
- Weber , B.W. , Kumar , K. , Zhang , Y. , and Sung , C.-J. Autoignition of n-Butanol at Elevated Pressure and Low-to-Intermediate Temperature Combustion and Flame 158 5 809 819 2011 10.1016/j.combustflame.2011.02.005
- Engine Combustion Network|Gasoline Jet Penetration https://ecn.sandia.gov/gasoline-spray-combustion/experimental-diagnostics/gasoline-jet-penetration/ Dec. 2019
- Hung , D.L.S. , Harrington , D.L. , Gandhi , A.H. , Markle , L.E. et al. Gasoline Fuel Injector Spray Measurement and Characterization - A New SAE J2715 Recommended Practice SAE Int. J. Fuels Lubr 1 1 534 548 2008 10.4271/2008-01-1068
- Wadkar , C. , Chinnathambi , P. , and Toulson , E. Analysis of Rapid Compression Machine Facility Effects on the Auto-Ignition of Ethanol Fuel 264 116546 2020 10.1016/j.fuel.2019.116546
- Wadkar , C. , Chinnathambi , P. , and Toulson , E. An Experimental Study on the Factors Affecting Ethanol Ignition Delay Times in a Rapid Compression Machine 2019-01-0576 2019 https://doi.org/10.4271/2019-01-0576
- Yamaguchi , A. , Koopmans , L. , Helmantel , A. , Karrholm , F.P. , and Dahlander , P. Spray Characterization of Gasoline Direct Injection Sprays Under Fuel Injection Pressures up to 150 MPa with Different Nozzle Geometries 2019 https://doi.org/10.4271/2019-01-0063
- Postrioti , L. , Cavicchi , A. , Brizi , G. , Berni , F. , and Fontanesi , S. Experimental and Numerical Analysis of Spray Evolution, Hydraulics and Atomization for a 60 MPa Injection Pressure GDI System 2018-01-0271 2018 https://doi.org/10.4271/2018-01-0271
- Medina , M. , Fatouraie , M. , and Wooldridge , M. High-Speed Imaging Studies of Gasoline Fuel Sprays at Fuel Injection Pressures from 300 to 1500 Bar 2018-01-0294 2018 https://doi.org/10.4271/2018-01-0294
- Kay , P.J. , Bowen , P.J. , Gold , M. , and Sapsford , S.M. Studies of Gasoline Direct-Injection Sprays at Elevated Ambient Gas Temperatures and Pressures Atomiz Spr 22 4 305 331 2012 10.1615/AtomizSpr.2012005411
- Chinnathambi , P. , Wadkar , C. , Shrestha , A. , Gudiyella , S. , Estefanous , A. , Lurun , Z. , and Toulson , E. An RCM Study on Ignition Delay Times of Gasoline Mixtures and their Multicomponent Surrogates Under Diluted and Undiluted Conditions
- Sarathy , S.M. , Farooq , A. , and Kalghatgi , G.T. Recent Progress in Gasoline Surrogate Fuels Progress in Energy and Combustion Science 65 67 108 2018 10.1016/j.pecs.2017.09.004
- Hoffmann , G. , Befrui , B. , Berndorfer , A. , Piock , W.F. , and Varble , D.L. Fuel System Pressure Increase for Enhanced Performance of GDi Multi-Hole Injection Systems SAE International Journal of Engines 7 1 519 527 2014 https://doi.org/10.4271/2014-01-1209