This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
On the Design of Heat Exchangers for Altitude Simulators
Technical Paper
2021-01-0388
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
Altitude simulators for internal combustion engines are broadly used in order to simulate different atmospheric pressure and temperatures on a test bench. One of the main problems of these devices is their outlet temperature and in order to control it, at least one heat exchanger is needed. A methodology to define, select and analyses the best heat exchanger that fulfill the requirements is presented. The methodology combines CFD and 0D models with experimental test. The combination of these tools allows to adjust both the 0D and the CFD models. The adjusted 0D model will be used to perform parametric analysis that will help to select the best geometrical combinations considering heat transfer and pressure losses while the CFD model will help to find possible local deficiencies on the designed Heat Exchanger and, therefore, try to improve it. Finally, the adjusted 0D model have been used to perform parametric studies changing the most important geometric characteristics to analyze the effect on HEX performance.
Authors
Topic
Citation
Broatch, A., Olmeda, P., Garcia-Tiscar, J., and Roig, F., "On the Design of Heat Exchangers for Altitude Simulators," SAE Technical Paper 2021-01-0388, 2021, https://doi.org/10.4271/2021-01-0388.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- European Commission Regulation (EC) No 715/2007 of the European Parliament and of the Council Off. J. Eur. Union L171 1 16 2007
- Testa , D. 2011 Apparatus and Method for Altimetry Conditioning of Internal-Combustion Engines
- Desantes , J.M. , Galindo , J. , Payri , F. , Serrano , J.R. , and Piqueras , P. 2015 Device for Conditioning the Atmosphere in Alternative Internal Combustion Engine Tests, Procedure and Use of Said Device
- Payri , F. , Desantes , J.M. , Galindo , J. , and Serrano , J.R. 2011 Unit for Simulating the Pressure and Temperature Conditions of the Air Drawn in by a Reciprocating Internal Combustion Engine
- Broatch , A. , Bermúdez , V. , Serrano , J.R. , Tabet , R. et al. Analysis of Passenger Car Turbocharged Diesel Engines Performance When Tested at Altitude and of the Altitude Simulator Device Used Journal of Engineering for Gas Turbines and Power 141 081017 081011 2019
- Bermúdez , V. , Serrano , J.R. , Piqueras , P. , Gómez , J. , and Bender , S. Analysis of the Role of Altitude on Diesel Engine Performance and Emissions Using an Atmosphere Simulator International J of Engine Research 18 1-2 105 117 2017 10.1177/1468087416679569
- Abeykoon , C. Compact Heat Exchangers - Design and Optimization with CFD International Journal of Heat and Mass Transfer 146 118766 2020
- Milcheva , I. , Heberle , F. , and Brüggemann , D. Modeling and Simulation of a Shell-and-Tube Heat Exchanger for Organic Rankine Cycle Systems with Double-Segmental Baffles by Adapting the Bell-Delaware Method Applied Thermal Engineering 126 507 517 2017 10.1016/j.applthermaleng.2017.07.020
- Bell , K.J. Delaware Method for Shell-Side Design Shah , R.K. , Subbarao , E.C. , and Mashelkar , R.A. Heat Transfer Equipment Design Washington, DC Hemisphere Publishing 1988 145 166
- Bayram , H. , and Sevilgen , G. Numerical Investigation of the Effect of Variable Baffle Spacing on the Thermal Performance of a Shell and Tube Heat Exchanger Energies 10 1156 2017
- Gonçalves , C.d.O. , Costa , A.L.H. , and Bagajewicz , M.J. Linear Method for the Design of Shell and Tube Heat Exchangers Using the Bell-Delaware Method AIChE Journal 65 e16602 2019
- Wagner Henrique Saldanha Felipe Raul Ponce Arrieta · Gustavo Luís Soares State-of-the-Art of Research on Optimization of Shell and Tube Heat Exchangers by Methods of Evolutionary Computation Archives of Computational Methods in Engineering 2020 10.1007/s11831-020-09476-4
- Sanaye , S. , and Hajabdollahi , H. Multi-Objective Optimization of Shell and Tube Heat Exchangers Applied Thermal Engineering 30 1937 1945 2010
- SAE International Turbocharger Gas Stand Test Code 1995
- SAE International Supercharger Testing Standard 1995
- Bell , K.J. Approximate Sizing of Shell-and-Tube Heat Exchangers Heat Exchanger Design Handbook Hewitt , G.F. Begell House New York 3 1998
- Bejan , A. , and Kraus , A.D. Heat Transfer Handbook New Jersey John Wiley & Sons 2003
- Incropera , F.P. , and DeWitt , D.P. Fundamentals of Heat and Mass Transfer 4th New York Wiley 1996
- Sha , R.K. , and Sekulic , D.P. Fundamentals of Heat Exchanger Design New Jersey John Wiley & Sons 2003