This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Variations in User Implementation of the CORA Rating Metric
Technical Paper
2020-22-0001
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The CORA rating metric is frequently used in the field of injury biomechanics to compare the similarity of response time histories. However, subjectivity exists within the CORA metric in the form of user-customizable parameters that give the metric the flexibility to be used for a variety of applications. How these parameters are customized is not always reported in the literature, and it is unknown how these customizations affect the CORA scores. Therefore, the purpose of this study was to evaluate how variations in the CORA parameters affect the resulting similarity scores. A literature review was conducted to determine how the CORA parameters are commonly customized within the literature. Then, CORA scores for two datasets were calculated using the most common parameter customizations and the default parameters. Differences between the CORA scores using customized and default parameters were statistically significant for all customizations. Furthermore, most customizations produced score increases relative to the default settings. The use of standard deviation corridors and exclusion of the corridor component were found to produce the largest score differences. The observed differences demonstrated the need for researchers to exercise transparency when using customized parameters in CORA analyses.
Topic
Citation
Albert, D., "Variations in User Implementation of the CORA Rating Metric," SAE Technical Paper 2020-22-0001, 2021, https://doi.org/10.4271/2020-22-0001.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 | ||
Unnamed Dataset 9 | ||
Unnamed Dataset 10 | ||
Unnamed Dataset 11 | ||
Unnamed Dataset 12 | ||
Unnamed Dataset 13 | ||
Unnamed Dataset 14 | ||
Unnamed Dataset 15 | ||
Unnamed Dataset 16 |
Also In
References
- Albert , D.L. , Beeman , S.M. and Kemper , A.R. 2018 Occupant kinematics of the Hybrid III, THOR-M, and postmortem human surrogates under various restraint conditions in full-scale frontal sled tests Traffic Injury Prevention 19 sup1 S50 S58
- Albert , D.L. , Beeman , S.M. and Kemper , A.R. 2018 Assessment of thoracic response and injury risk using the Hybrid III, THOR-M, and post-mortem human surrogates under various restraint conditions in full-scale frontal sled tests Stapp Car Crash Journal 62 1 65
- Alshareef , A. , Giudice , J.S. , Forman , J. , Salzar , R.S. and Panzer , M.B. 2018 A novel method for quantifying human in situ whole brain deformation under rotational loading using sonomicrometry Journal of Neurotrauma 35 5 780 789
- Arun , M. , Umale , S. , Humm , J. , Yoganandan , N. and Pintar , F.A. 2016 Impact response evaluation of a restrained whole human body finite element model under far-side 90 and 60 degree impacts Proc. IRCOBI Conference 694 706 IRCOBI, Malaga, Spain
- Atsumi , N. , Nakahira , Y. and Iwamoto , M. 2016 Development and validation of a head/brain FE model and investigation of influential factor on the brain response during head impact International Journal of Vehicle Safety 9 1 1 23
- Atsumi , N. , Nakahira , Y. , Iwamoto , M. , Hirabayashi , S. and Tanaka , E. 2016 Constitutive modeling of brain parenchyma taking account of strain rate dependency with anisotropy and application to brain injury analyses SAE Technical Paper. No. 0148-7191 .
- Atsumi , N. , Nakahira , Y. , Tanaka , E. and Iwamoto , M. 2018 Human brain modeling with its anatomical structure and realistic material properties for brain injury prediction Annals of Biomedical Engineering 46 5 736 748
- Bailey , A. , Funk , J. , Lessley , D. , Sherwood , C. , Crandall , J. , Neale , W. and Rose , N. 2018 Validation of a videogrammetry technique for analysing american football helmet kinematics Sports Biomechanics 19 5 1 23
- Baker , W.A. , Chowdhury , M. and Untaroiu , C.D. 2018 A finite element model of an anthropomorphic test device lower limb to assess risk of injuries during vertical accelerative loading Journal of Biomechanics 81 104 112
- Baker , W.A. , Chowdhury , M.R. and Untaroiu , C.D. 2018 Validation of a booted finite element model of the WIAMan ATD lower limb in component and whole-body vertical loading impacts with an assessment of the boot influence model on response Traffic Injury Prevention 19 5 549 554
- Barbat , S. , Fu , Y. , Zhan , Z. , Yang , R.-J. and Gehre , C. 2013 Objective rating metric for dynamic systems Proc. Enhanced Safety of Vehicles Conference National Highway Traffic Safety Administration Seoul, Republic of Korea
- Barker , J.B. , Cronin , D.S. and Chandrashekar , N. 2014 High rotation rate behavior of cervical spine segments in flexion and extension Journal of Biomechanical Engineering 136 12
- Barker , J.B. , Cronin , D.S. and Nightingale , R.W. 2017 Lower cervical spine motion segment computational model validation: Kinematic and kinetic response for quasi-static and dynamic loading Journal of Biomechanical Engineering 139 6
- Beeman , S.M. , Kemper , A.R. and Duma , S.M. 2016 Neck forces and moments of human volunteers and post mortem human surrogates in low-speed frontal sled tests Traffic Injury Prevention 17 sup1 141 149
- Bradfield , C. , Vavalle , N. , DeVincentis , B. , Wong , E. , Luong , Q. , Voo , L. and Carneal , C. 2018 Combat helmet suspension system stiffness influences linear head acceleration and white matter tissue strains: Implications for future helmet design Military Medicine 183 suppl_1 276 286
- Bustamante , M. , Singh , D. and Cronin , D. 2018 Polymeric hopkinson bar-confinement chamber apparatus to evaluate fluid cavitation Experimental Mechanics 58 1 55 74
- Bustamante , M. , Bruneau , D. , Barker , J. , Gierczycka , D. , Coralles , M. and Cronin , D. 2019 Component-level finite element model and validation for a modern american football helmet Journal of Dynamic Behavior of Materials 5 2 117 131
- Bustamante , M. and Cronin , D. 2019 Cavitation threshold evaluation of porcine cerebrospinal fluid using a polymeric split hopkinson pressure bar-confinement chamber apparatus Journal of the Mechanical Behavior of Biomedical Materials 100
- Chen , H. , Poulard , D. , Forman , J. , Crandall , J. and Panzer , M.B. 2018 Evaluation of geometrically personalized thums pedestrian model response against sedan–pedestrian PMHS impact test data Traffic Injury Prevention 19 5 542 548
- Danelson , K.A. , Kemper , A.R. , Mason , M.J. , Tegtmeyer , M. , Swiatkowski , S.A. , Bolte IV , J.H. and Hardy , W.N. 2015 Comparison of ATD to PMHS response in the under-body blast environment SAE Technical Paper. No. 2015-22-0017
- Donnelly , B.R. , Morgan , R.M. and Eppinger , R.H. 1983 Durability, repeatability and reproducibility of the NHTSA side impact dummy SAE Technical Paper. No. 0148-7191 .
- Eggers , A. , Schwedhelm , H. , Zander , O. , Izquierdo , R.C. , Polanco , J.A.G. , Paralikas , J. , Georgoulias , K. , Chryssolouris , G. , Seibert , D. and Jacob , C. 2013 Virtual testing based type approval procedures for the assessment of pedestrian protection developed within the EU-project IMVITER Proc. The 23rd Enhanced Safety of Vehicles Conference National Highway Traffic Safety Administration, Seoul, Korea
- Feller , L. , Kleinbach , C. , Fehr , J. and Schmitt , S. 2016 Incorporating muscle activation dynamics into the global human body model Proc. IRCOBI Conference 512 523 IRCOBI, Malaga, Spain
- Gabler , L.F. , Panzer , M.B. and Salzar , R.S. 2014 High-rate mechanical properties of human heel pad for simulation of a blast loading condition Proc. IRCOBI Conference 186 197 IRCOBI, Berlin, Germany
- Gaewsky , J.P. , Jones , D.A. , Ye , X. , Koya , B. , McNamara , K.P. , Gayzik , F.S. , Weaver , A.A. , Putnam , J.B. , Somers , J.T. and Stitzel , J.D. 2019 Modeling human volunteers in multidirectional, uni-axial sled tests using a finite element human body model Annals of Biomedical Engineering 47 2 487 511
- Garimella , H.T. , Kraft , R.H. and Przekwas , A.J. 2018 Do blast induced skull flexures result in axonal deformation? PloS one 13 3
- Gayzik , F.S. , Davis , M.L. , Koya , B. , Schap , J.M. and Hsu , F.C. 2018 Feature specific assessment of time history signals by objective evaluation and subject matter expert opinion Journal of Verification, Validation and Uncertainty Quantification 3 3
- Geers , T.L. 1984 An objective error measure for the comparison of calculated and measured transient response histories Shock and Vibration Information Center The Shock and Vibration Bull 54 2 99 108
- Gehre , C. , Gades , H. and Wernicke , P. 2009 Objective rating of signals using test and simulation responses Proc. The 21st International Technical Conference on the Enhanced Safety of Vehicles National Highway Traffic Safety Administration, Stuttgart, Germany
- Georgiou , G. and Zeguer , T. 2018 On the assessment of the macro-element methodology for full vehicle crashworthiness analysis International Journal of Crashworthiness 23 3 336 353
- Gierczycka , D. , Watson , B. and Cronin , D. 2015 Investigation of occupant arm position and door properties on thorax kinematics in side impact crash scenarios–comparison of ATD and human models International Journal of Crashworthiness 20 3 242 269
- Giordano , C. and Kleiven , S. 2016 Development of an unbiased validation protocol to assess the biofidelity of finite element head models used in prediction of traumatic brain injury SAE Technical Paper. No. 2016-22-0013
- Giudice , J.S. , Park , G. , Kong , K. , Bailey , A. , Kent , R. and Panzer , M.B. 2019 Development of open-source dummy and impactor models for the assessment of american football helmet finite element models Annals of Biomedical Engineering 47 2 464 474
- Huang , J. , Peng , Y. , Yang , J. , Otte , D. and Wang , B. 2018 A study on correlation of pedestrian head injuries with physical parameters using in-depth traffic accident data and mathematical models Accident Analysis & Prevention 119 91 103
- Hwang , E. , Hu , J. , Chen , C. , Klein , K.F. , Miller , C.S. , Reed , M.P. , Rupp , J.D. and Hallman , J.J. 2016 Development, evaluation, and sensitivity analysis of parametric finite element whole-body human models in side impacts SAE Technical Paper. No. 2016-22-0014
- ISO 2014 Road vehicles - objective rating metric for non-ambiguous signals ISO. Document No. ISO/TS 18571
- Isshiki , T. , Antona-Makoshi , J. , Konosu , A. and Takahashi , Y. 2018 Consolidated technical specifications for the advanced pedestrian legform impactor (aPLI) Proc. IRCOBI Conference 284 301 IRCOBI, Athens, Greece
- Iwamoto , M. and Nakahira , Y. 2015 Development and validation of the Total HUman Model for Safety (THUMS) version 5 containing multiple 1d muscles for estimating occupant motions with muscle activation during side impacts SAE Technical Paper. No. 2015-22-0003
- Iwamoto , M. , Nakahira , Y. and Kimpara , H. 2015 Development and validation of the Total HUman Model for Safety (THUMS) toward further understanding of occupant injury mechanisms in precrash and during crash Traffic Injury Prevention 16 sup1 S36 S48
- Jones , D.A. , Gaewsky , J.P. , Saffarzadeh , M. , Putnam , J.B. , Weaver , A.A. , Somers , J.T. and Stitzel , J.D. 2019 Multidirection validation of a finite element 50th percentile male Hybrid III anthropomorphic test device for spaceflight applications Journal of Biomechanical Engineering 141 3
- Kato , D. , Nakahira , Y. , Atsumi , N. and Iwamoto , M. 2018 Development of human-body model THUMS version 6 containing muscle controllers and application to injury analysis in frontal collision after brake deceleration Proc. IRCOBI Conference 207 223 IRCOBI, Athens, Greece
- Kim , T. , Shaw , G. , Lessley , D. , Park , G. , Crandall , J. , Svendsen , A. , Whitcomb , B. , Ayyagari , M. , Mishra , P. and Markusic , C. 2016 Biofidelity evaluation of WorldSID and ES-2re under side impact conditions with and without airbag Accident Analysis & Prevention 90 140 151
- Kunitomi , S. , Yamamoto , Y. , Kato , R. , Antona- Makoshi , J. , Konosu , A. , Dokko , Y. and Yasuki , T. 2017 The development of the lower extremity of a human FE model and the influence of anatomical detailed modelling in vehicle-to-pedestrian impacts Proc. IRCOBI Conference 469 493 IRCOBI, Antwerp, Belgium
- Lee , I. and Kim , H.j. 2017 Evaluation of biofidelity of the human body model morphed to female with abdominal obesity in frontal crashes SAE Technical Paper. No. 0148-7191 .
- Lessley , D. , Crandall , J. , Shaw , G. , Kent , R. and Funk , J. 2004 A normalization technique for developing corridors from individual subject responses SAE Technical Paper. No. 0148-7191 .
- Li , G. , Tan , Z. , Lv , X. and Ren , L. 2019 A computationally efficient finite element pedestrian model for head safety: Development and validation Applied Bionics and Biomechanics 2019
- Matsuda , T. , Yamada , K. , Hayashi , S. and Kitagawa , Y. 2018 Simulation of occupant posture changes due to evasive manoeuvres and injury predictions in vehicle frontal and side collisions Proc. IRCOBI Conference 512 523 IRCOBI, Athens, Greece
- Mattos , G.A. , Mcintosh , A.S. , Grzebieta , R. , Yoganandan , N. and Pintar , F.A. 2015 Sensitivity of head and cervical spine injury measures to impact factors relevant to rollover crashes Traffic Injury Prevention 16 sup1 S140 S147
- McNamara , K.P. , Jones , D.A. , Gaewsky , J.P. , Putnam , J.B. , Somers , J.T. , Weaver , A.A. and Stitzel , J.D. 2018 Validation of a finite element 50th percentile THOR anthropomorphic test device in multiple sled test configurations SAE Technical Paper. No. 2018-22-0012
- Meng , S. , Fahlstedt , M. and Halldin , P. 2018 The effect of impact velocity angle on helmeted head impact severity: A rationale for motorcycle helmet impact test design Proc. IRCOBI Conference 454 469 IRCOBI, Athens, Greece
- Miller , L.E. , Urban , J.E. and Stitzel , J.D. 2016 Development and validation of an atlas-based finite element brain model Biomechanics and Modeling in Mechanobiology 15 5 1201 1214
- Miller , L.E. , Urban , J.E. and Stitzel , J.D. 2017 Validation performance comparison for finite element models of the human brain Computer Methods in Biomechanics and Biomedical Engineering 20 12 1273 1288
- Miller , L.E. , Urban , J.E. and Stitzel , J.D. 2019 Estimation of 6 degrees-of-freedom accelerations from head impact telemetry system outputs for computational modeling New Developments on Computational Methods and Imaging in Biomechanics and Biomedical Engineering 121 130 Springer, Cham
- Miyazaki , Y. , Railkar , A. , Awamori , S. , Kokeguchi , A. , Amamori , I. , Katagiri , M. and Yoshii , K. 2017 Intracranial brain motion measurement in frontal sled tests by using a new anthropometric test dummy head capable of direct brain motion evaluation and visualization Proc. IRCOBI Conference 284 295 IRCOBI, Antwerp, Belgium
- Morgan , R.M. , Marcus , J.H. and Eppinger , R.H. 1981 Correlation of side impact dummy/cadaver tests SAE Technical Paper. No. 0148-7191 .
- Mroz , K. , Pipkorn , B. , Kim , H.J. and Crandall , J. 2017 Investigation of pelvis kinematics for various lap belt positions and an inflatable pelvis restraint cushion using a human body model of a female occupant Proc. The 25th International Technical Conference on the Enhanced Safety of Vehicles National Highway Traffic Safety Administration, Detroit, Michigan
- Newell , N. , Salzar , R. , Bull , A.M. and Masouros , S.D. 2016 A validated numerical model of a lower limb surrogate to investigate injuries caused by under-vehicle explosions Journal of Biomechanics 49 5 710 717
- Nie , B. , Crandall , J.R. and Panzer , M.B. 2017 Computational investigation of the effects of knee airbag design on the interaction with occupant lower extremity in frontal and oblique impacts Traffic Injury Prevention 18 2 207 215
- Nie , B. , Giudice , J.S. , Poulard , D. , Wu , T. and Panzer , M.B. 2019 Evaluation and injury investigation of a finite element foot and ankle model for small female occupants International Journal of Crashworthiness 24 5 580 591
- Nusholtz , G.S. , Aoun , Z. , Di Domenico , L. , Hsu , T. , Graciá n , M.A. and Prado , J.A. 2013 Statistical considerations for evaluating biofidelity, repeatability, and reproducibility of ATDs SAE International Journal of Transportation Safety 1 1 200 218
- Östh , J. , Mendoza-Vazquez , M. , Linder , A. , Svensson , M.Y. and Brolin , K. 2017 The VIVA OpenHBM finite element 50th percentile female occupant model: Whole body model development and kinematic validation Proc. IRCOBI Conference 13 15 IRCOBI, Antwerp, Belgium
- Paas , R. , Ö sth , J. and Davidsson , J. 2015 Which pragmatic finite element human body model scaling technique can most accurately predict head impact conditions in pedestrian-car crashes Proc. IRCOBI Conference 9 11 IRCOBI, Lyon, France
- Parent , D. , Craig , M. and Moorhouse , K. 2017 Biofidelity evaluation of the THOR and Hybrid III 50th percentile male frontal impact anthropomorphic test devices Stapp Car Crash Journal 61 227 276
- Park , G. , Kim , T. , Crandall , J.R. , Arregui Dalmases , C. and Luzón Narro , B.J. 2013 Comparison of kinematics of GHBMC to PMHS on the side impact condition Proc. IRCOBI Conference 368 379 IRCOBI, Gothenburg, Sweden
- Park , G. , Kim , T. , Crandall , J. , Svendsen , A. , Saunders , N. and Markusic , C. 2014 Evaluation of biofidelity of side impact computational surrogates (ES-2re, WorldSID, GHBMC) SAE Technical Paper. No. 0148-7191 .
- Peres , J. , Bastien , C. , Christensen , J. and Asgharpour , Z. 2019 A minimum area discrepancy method (MADM) for force displacement response correlation Computer Methods in Biomechanics and Biomedical Engineering 22 11 981 996
- Perez-Rapela , D. , Markusic , C. , Whitcomb , B. , Pipkorn , B. , Forman , J. , Donlon , J.P. , MontesinosAcosta , S. and Crandall , J. 2018 Comparison of WorldSID to PMHS kinematics in far-side impact Proc. IRCOBI Conference 630 654
- Pipkorn , B. , Lopez-Valdes , F.J. , Juste- Lorente , O. , Maza , M. and Sunnevå ng , C. 2016 Study of the kinematics of the THOR dummy in nearside oblique impacts Proc. IRCOBI Conference 637 648 IRCOBI, Malaga, Spain
- Pipkorn , B. and Wass , J. 2017 Pre-crash triggered pretensioning of the seat belt for improved safety Proc. the 25th Enhanced Safety of Vehicles Conference National Highway Traffic Safety Administration, Detroit, Michigan
- Pipkorn , B. , Larsson , K. , Rapela , D.P. , Markusic , C. , Whitcomb , B. , Ayyagari , M. and Sunnevå ng , C. 2018 Occupant protection in far-side impacts Proc. IRCOBI Conference 76 105 IRCOBI, Athens, Greece
- Piqueras-Lorente , A. , Iraeus , J. , Lorente , A.I. , López-Valdé s , F.J. , Juste-Lorente , Ó. , Maza-Frechín , M. and Pipkorn , B. 2018 Kinematic assessment of subject personification of human body models (THUMS) Proc. IRCOBI Conference 191 206 IRCOBI, Athens, Greece
- Poulard , D. , Kent , R.W. , Kindig , M. , Li , Z. and Subit , D. 2015 Thoracic response targets for a computational model: A hierarchical approach to assess the biofidelity of a 50th-percentile occupant male finite element model Journal of the Mechanical Behavior of Biomedical Materials 45 45 64
- Poulard , D. and Subit , D. 2015 Unveiling the structural response of the ribcage: Contribution of the intercostal muscles to the thoracic mechanical response Proc. 24th International Technical Conference on the Enhanced Safety of Vehicles National Highway Traffic Safety Administration, Gothenburg, Sweden
- Poulard , D. , Subit , D. , Nie , B. , Donlon , J.-P. and Kent , R.W. 2015 The contribution of pre-impact posture on restrained occupant finite element model response in frontal impact Traffic Injury Prevention 16 sup2 S87 S95
- Poulard , D. , Chen , H. and Panzer , M. 2016 Geometrical personalization of pedestrian finite element models using morphing increases the biofidelity of their impact kinematics SAE Technical Paper. No. 0148-7191 .
- Poulard , D. , Zhang , Q. , Cochran , J.R. , Gepner , B. and Kerrigan , J. 2016 Quantitative evaluation of the occupant kinematic response of the THUMS 50th-percentile male model relative to PMHS laboratory rollover tests Traffic Injury Prevention 17 sup1 101 108
- Pramudita , J.A. , Kikuchi , S. , Minato , I. and Tanabe , Y. 2017 Effect of cervical spine alignment on neck injury risk during rear-end impact–numerical study using neck finite element model International Journal of Crashworthiness 22 4 453 466
- Putnam , J.B. , Somers , J.T. and Untaroiu , C.D. 2014 Development, calibration, and validation of a head–neck complex of THOR mod kit finite element model Traffic Injury Prevention 15 8 844 854
- Putnam , J.B. , Somers , J.T. , Wells , J.A. , Perry , C.E. and Untaroiu , C.D. 2015 Development and evaluation of a finite element model of the THOR for occupant protection of spaceflight crewmembers Accident Analysis & Prevention 82 244 256
- Putnam , J.B. , Untaroiu , C.D. , Littell , J. and Annett , M. 2015 Finite element model of the THOR-NT dummy under vertical impact loading for aerospace injury prediction: Model evaluation and sensitivity analysis Journal of the American Helicopter Society 60 2 1 10
- Reichert , R. and Kan , C.-D. 2018 Development of structural countermeasures for NHTSA’s oblique impact Proc. ASME International Mechanical Engineering Congress and Exposition American Society of Mechanical Engineers, Pittsburgh, PA
- Rhule , H. , Moorhouse , K. , Donnelly , B. and Stricklin , J. 2009 Comparison of WorldSID and ES-2re biofidelity using an updated biofidelity ranking system Proc. International Technical Conference on the Enhanced Safety of Vehicles National Highway Traffic Safety Administration, Stuttgart, Germany
- Rhule , H. , Donnelly , B. , Moorhouse , K. and Kang , Y.S. 2013 A methodology for generating objective targets for quantitatively assessing the biofidelity of crash test dummies Proc. Enhanced Safety of Vehicles National Highway Traffic Safety Administration, Seoul, Republic of Korea
- Rhule , H. 2018 Improvements to NHTSA's biofidelity ranking system and application to the evaluation of the THOR 5th female dummy Proc. IRCOBI Conference 53 55 IRCOBI, Athens, Greece
- Rhule , H.H. , Maltese , M.R. , Donnelly , B.R. , Eppinger , R.H. , Brunner , J.K. and Bolte , J.H. 2002 Development of a new biofidelity ranking system for anthropomorphic test devices SAE Technical Paper. No. 2002-22-0024
- Sato , F. , Odani , M. , Miyazaki , Y. , Yamazaki , K. , Ö sth , J. and Svensson , M. 2017 Effects of whole spine alignment patterns on neck responses in rear end impact Traffic Injury Prevention 18 2 199 206
- Saunders , J. and Parent , D. 2018 Repeatability and reproducibility of oblique moving deformable barrier test procedure SAE Technical Paper. No. 0148-7191 .
- Schap , J.M. , Koya , B. and Gayzik , F.S. 2019 Objective evaluation of whole body kinematics in a simulated, restrained frontal impact Annals of Biomedical Engineering 47 2 512 523
- Shi , Y. and Nusholtz , G. 2015 Assessment of similarity of a set of impact response time histories SAE International Journal of Transportation Safety 3 1 28 38
- Singh , D. , Cronin , D.S. and Haladuick , T.N. 2014 Head and brain response to blast using sagittal and transverse finite element models International Journal for Numerical Methods in Biomedical Engineering 30 4 470 489
- Singh , D. and Cronin , D.S. 2017 An investigation of dimensional scaling using cervical spine motion segment finite element models International Journal for Numerical Methods in Biomedical Engineering 33 11
- Somasundaram , K. , Kalra , A. , Sherman , D. , Begeman , P. , Yang , K.H. and Cavanaugh , J. 2017 An experimental and numerical study of Hybrid III dummy response to simulated underbody blast impacts Journal of Biomechanical Engineering 139 12
- Somasundaram , K. , Zhang , L. , Sherman , D. , Begeman , P. , Lyu , D. and Cavanaugh , J. 2019 Evaluating thoracolumbar spine response during simulated underbody blast impact using a total human body finite element model Journal of the Mechanical Behavior of Biomedical Materials 100
- Song , E. , Petit , P. and Uriot , J. 2018 Modelling of an adjustable generic simplified vehicle for pedestrian impact and simulations of corresponding reference PMHS tests using the GHMBC 50th percentile male pedestrian simplified model SAE Technical Paper. No. 2018-22-0013
- Sprague , M. and Geers , T. 2004 A spectral-element method for modelling cavitation in transient fluid– structure interaction International Journal for Numerical Methods in Engineering 60 15 2467 2499
- Sprague , M.A. and Geers , T.L. 2003 Spectral elements and field separation for an acoustic fluid subject to cavitation Journal of Computational Physics 184 1 149 162
- Thunert , C. 2012 Cora release 3.6 user's manual GNS mbH Germany
- Thunert , C. 2017 Coraplus release 4.0. 4 user’s manual PDB (Partnership for Dummy Technology Biomechanics Gaimersheim, Germany
- Untaroiu , C. , Shin , J. and Lu , Y.C. 2013 Assessment of a dummy model in crash simulations using rating methods International Journal of Automotive Technology 14 3 395 405
- Untaroiu , C.D. , Putnam , J.B. , Somers , J.T. and Pellettiere , J.A. 2014 Preliminary calibration and validation of a finite element model of THOR mod kit dummy Proc. International Design Engineering Technical Conferences and Computers and Information in Engineering Conference American Society of Mechanical Engineers, Buffalo, NY.
- Untaroiu , C.D. , Pak , W. , Meng , Y. , Schap , J. , Koya , B. and Gayzik , S. 2018 A finite element model of a midsize male for simulating pedestrian accidents Journal of Biomechanical Engineering 140 1
- Vavalle , N.A. , Jelen , B.C. , Moreno , D.P. , Stitzel , J.D. and Gayzik , F.S. 2013 An evaluation of objective rating methods for full-body finite element model comparison to PMHS tests Traffic Injury Prevention 14 sup1 S87 S94
- Weaver , C.M. , Baker , A.M. , Davis , M.L. , Miller , A.N. and Stitzel , J.D. 2018 Finite element-based pelvic injury metric creation and validation in lateral impact for a human body model Journal of Biomechanical Engineering 140 6
- White , N.A. , Danelson , K.A. , Scott Gayzik , F. and Stitzel , J.D. 2014 Head and neck response of a finite element anthropomorphic test device and human body model during a simulated rotary-wing aircraft impact Journal of Biomechanical Engineering 136 11
- White , N.A. , Danelson , K.A. , Gayzik , F.S. , Hsu , W. , Powers , A. and Stitzel , J.D. 2016 Effects of cervical arthroplasty on neck response during a simulated rotary-wing aircraft impact International Journal of Crashworthiness 21 4 323 337
- Whyte , T. , Gibson , T. , Eager , D. and Milthorpe , B. 2016 Response of a full-face motorcycle helmet FE model to the UNECE 22.05 chin bar impact test International journal of crashworthiness 21 6 555 565
- Woitsch , G. and Sinz , W. 2014 Influences of pre-crash braking induced dummy–forward displacements on dummy behaviour during EuroNCAP frontal crashtest Accident Analysis & Prevention 62 268 275
- Wu , T. , Alshareef , A. , Giudice , J.S. and Panzer , M.B. 2019 Explicit modeling of white matter axonal fiber tracts in a finite element brain model Annals of Biomedical Engineering 47 9 1908 1922
- Xu , L. , Agaram , V. , Rouhana , S. , Hultman , R.W. , Kostyniuk , G.W. , McCleary , J. , Mertz , H. , Nusholtz , G.S. and Scherer , R. 2000 Repeatability evaluation of the pre-prototype NHTSA advanced dummy compared to the Hybrid III SAE transactions 109 6 314 339
- Zhan , Z. , Fu , Y. and Yang , R.J. 2011 Enhanced Error Assessment of Response Time Histories (EEARTH) metric and calibration process SAE Technical Paper. No. 0148-7191 .
- Zhang , Q. , Gepner , B. , Toczyski , J. and Kerrigan , J. 2016 Development of a biofidelic rollover dummy-part II: Validation of the kinematic response of THOR multi-body and finite element models relative to response of the physical THOR dummy under laboratory rollover conditions SAE International Journal of Transportation Safety 4 1 151 171
- Zhao , W. and Ji , S. 2019 White matter anisotropy for impact simulation and response sampling in traumatic brain injury Journal of Neurotrauma 36 2 250 263
- Zhou , Z. , Li , X. , Kleiven , S. , Shah , C.S. and Hardy , W.N. 2018 A reanalysis of experimental brain strain data: Implication for finite element head model validation Stapp Car Crash Journal 62 293 318
- Zhou , Z. , Li , X. and Kleiven , S. 2019 Fluid–structure interaction simulation of the brain–skull interface for acute subdural haematoma prediction Biomechanics and Modeling in Mechanobiology 18 1 155 173