This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Parameter Determination for the Battery Equivalent Circuit Model Using a Numerical Integro-Differential Method
Technical Paper
2020-01-1179
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The battery equivalent circuit model consisting of an open circuit voltage (OCV) source and a resistor in series with parallel resistor-capacitor (RC) elements is widely used in system-level simulation. The accuracy of the transient I-V characteristics of the battery model strongly relies on the values of the RC parameters prescribed in the circuit. One of the solutions for determining RC parameters is curve-fitting the measurement data of the battery voltage in the relaxation period obtained from a charge or discharge current pulse test. Since the equation used for curve-fitting can be expressed as the sum of multiple exponential functions which are nonlinear with respect to the RC parameters, the nonlinear least-square (LS) algorithm shows poor performance or even fails due to its sensitiveness to initial guesses of the solutions.
One approach that makes use of the unique feature of the sum of two exponentials reformulates the nonlinear voltage equation to a linear one and calculates out the RC parameters using the linear LS algorithm. However, the approach cannot be applied to the model with more than two RC elements. In this work, an integro-differential method is applied to the nonlinear problem arisen from curve-fitting the RC parameters. As a result, the nonlinear equation containing the sum of multiple exponential functions can be linearized. An application example demonstrates that the LS algorithm applied to the resulting linear equation shows no sensitivity to the initial conditions and good accuracy can be achieved.
Recommended Content
Technical Paper | Li-Ion Battery SoC Estimation Using a Bayesian Tracker |
Technical Paper | Modeling of Fast Charging of Hybrid and Electric Vehicles Batteries |
Journal Article | Modeling of Li-ion Battery Performance in Hybrid Electric Vehicles |
Citation
Chen, C., "Parameter Determination for the Battery Equivalent Circuit Model Using a Numerical Integro-Differential Method," SAE Technical Paper 2020-01-1179, 2020, https://doi.org/10.4271/2020-01-1179.Also In
References
- Chen , M. and Rincon-Mora , G.A. Accurate Electrical Battery Model Capable of Predicting Runtime and I-V Performance IEEE Trans. Energy Conversion 21 2 June 2006
- Gau , L. , Liu , S. , and Dougal , R.A. Dynamic Lithium-Ion Battery Model for System Simulation IEEE Trans. Comp. Package. Technol. 25 3 Sept. 2002
- Schweighofer , B. , Raab , K.M. , and Brasseur , G. Modeling of High-Power Automotive Batteries by the Use of an Automated Test System IEEE Trans. Instrumentation Measurement 52 4 Aug. 2003
- Knauff , M. , Niebur , D. , and Nwankpa , C. A Platform for the Testing and Validation of Dynamic Battery Models IEEE Electric Ship Technologies Symposium May 2009
- Hu , Y. , Yurkovich , S. , Guezennec , Y. , and Yurkovich , B.J. A Technique for Dynamic Battery Model Identification in Automotive Applications Using Linear Parameter Varying Structures Control Engineering Practice 17 10 Oct. 2009
- Jiang , S. A Parameter Identification Method for a Battery Equivalent Circuit Model SAE Technical Paper 2011-01-1367 2011 https://doi.org/10.4271/2011-01-1367
- Hu , X. , Collins , L. , Stanton , S. , and Jiang , S. A Model Parameter Identification Method for Battery Applications SAE Technical Paper 2013-01-1529 2013 https://doi.org/10.4271/2013-01-1529
- Jackey , R. , Saginaw , M. , Sanghvi , P. , Gazzarri , J. et al. Battery Model Parameter Estimation Using a Layered Technique: An Example Using a Lithium Iron Phosphate Cell SAE Technical Paper 2013-01-1547 2013 https://doi.org/10.4271/2013-01-1547
- Levenberg , K. A Method for the Solution of Certain Non-Linear Problems in Least Squares Quarterly of Applied Mathematics 2 2 164 168 July 1944
- Marquardt , D.W. An Algorithm for Least Squares Estimation on Nonlinear Parameters SIAM J. Appl. Math. 11 2 431 441 June 1963
- Foss , S.D. A Method for Obtaining Initial Estimates of the Parameters in Exponential Curve Fitting Biometrics 26 4 580 584 1970