This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigation on Tribological Performance of NanoZnO and Mixed Oxide of Cu-Zn as Additives in Engine Oil
Technical Paper
2020-01-1095
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The paper presents the comparative study on the antiwear properties of zinc oxide and Cu-Zn mixed oxide nanoparticles, as additive in SAE20W40 engine oil. The nanoparticles were prepared using precipitation method and characterized using scanning microscopy imaging technique and XRD analysis. The particle size was found to be between 70-80 nm.The stability of the nanosuspension play a vital role in the antiwear performance. Therefore the stability studies were carried out by dispersing varying concentration of nanoparticle between 0.01wt% - 0.05wt% in the engine oil using surface modifiers and sonication. Nanosuspensions above 0.02 wt% of nanoparticles showed sedimentation on long standing for 36h. Based on this, the concentration of nanoparticle in the engine oil was optimized as 0.01 and 0.02wt%.The nanosuspensions with optimized concentration i.e.0.01wt% ZnO, 0.02 wt% ZnO, 0.01wt% Cu-Zn and 0.02 wt% Cu- Zn mixed oxides were tested for antiwear property using four ball tester. The results revealed a reduction in friction and wear in comparison with the base oil. However, the zinc oxide suspensions exhibited highest reduction in CoF, WSD and WSD values. This can be attributed to the smaller particle size and uniform dispersion of zinc oxide nanoparticles in comparison to the mixed oxides of Cu-Zn.
Authors
- Bharadwaj Ramakrishnan - Hindustan Institute of Technology & Science
- Sangeethkumar Elumalai - Hindustan Institute of Technology & Science
- Jaikumar Mayakrishnan - Hindustan Institute of Technology & Science
- Induja Saravanan - Hindustan Institute of Technology & Science
- S Jenoris Muthiya - Hindustan Institute of Technology & Science
Topic
Citation
Ramakrishnan, B., Elumalai, S., Mayakrishnan, J., Saravanan, I. et al., "Investigation on Tribological Performance of NanoZnO and Mixed Oxide of Cu-Zn as Additives in Engine Oil," SAE Technical Paper 2020-01-1095, 2020, https://doi.org/10.4271/2020-01-1095.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Hu , Z.S. , Lai , R. , Lou , F. , Wang , L.G. et al. Preparation and Tribological Properties of Nanometer Magnesium Borate as Lubricating Oil Additive Wear 252 5-6 370 374 2002
- Huang , W. , Tan , Y. , Dong , J. , and Chen , B. Tribological Properties of the Film Formed by Borated Dioctyldithiocarbamate as an Additive in Liquid Paraffin Tribology International 35 11 787 791 2002
- Zhou , J. , Wu , Z. , Zhang , Z. , Liu , W. , and Dang , H. Study on an Antiwear and Extreme Pressure Additive of Surface Coated LaF3 Nanoparticles in Liquid Paraffin Wear 249 5-6 333 337 2001
- Yang , G.-B. , Chai , S.-T. , Xiong , X.-J. , Zhang , S.-M. et al. Preparation and Tribological Properties of Surface Modified Cu Nanoparticles Transactions of Nonferrous Metals Society of China 22 2 366 372 2012
- Qiu , S. , Zhou , Z. , Dong , J. , and Chen , G. Preparation of Ni Nanoparticles and Evaluation of Their Tribological Performance as Potential Additives in Oils Journal of Tribology 123 3 441 443 2001
- Hu , Z.S. and Dong , J.X. Study on Antiwear and Reducing Friction Additive of Nanometer Titanium Oxide Wear 216 1 92 96 1998
- Hu , Z .S. , Dong , J.X. , Chen , G.X. Study on Antiwear and Reducing Friction Additive of Nanometer Ferric Oxide Tribol. Int. 31 1998 355 360
- Dong , J.X. and Hu , Z.S. A Study of the Anti-Wear and Friction-Reducing Properties of the Lubricant Additive, Nanometer Zinc Borate Tribology International 31 5 219 223 1998
- Hu , Z.S. , Dong , J.X. , Chen , G.X. , and He , J.Z. Preparation and Tribological Properties of Nanoparticle Lanthanum Borate Wear 243 1-2 43 47 2000
- Xue , Q. , Liu , W. , and Zhang , Z. Friction and Wear Properties of a Surface-Modified TiO2 Nanoparticle as an Additive in Liquid Paraffin Wear 213 1-2 29 32 1997
- Sunqing , Q. , Dong , J. , and Guoxu , C. Wear and Friction Behaviour of CaCO3 Nanoparticles Used as Additives in Lubricating Oils Lubrication Science 12 2 205 212 2000
- Borda , F.L.G. , de Oliveira , S.J.R. , Lazaro , L.M.S. , and KalabLeiróz , A.J. Experimental Investigation of the Tribological Behavior of Lubricants with Additive Containing Copper Nanoparticles Tribology International 117 2018 52 58
- Babu , K.S. , Nair , K.P. , and Rajendrakumar , P.K. Computational Analysis of Journal Bearing Operating under Lubricant Containing Al2O3 and ZnO Nanoparticles International Journal of Engineering, Science and Technology 6 1 34 42 2014
- Luo , T. , Wei , X. , Zhao , H. , Cai , G. , and Zheng , X. Tribology Properties of Al2O3/TiO2 Nanocomposites as Lubricant Additives Ceramics International 40 7 10103 10109 2014
- Battez , A.H. , Fernandez Rico , J.E. , Navas Arias , A. , Viesca Rodriguez , J.L. , and Chou Rodriguez , R. , and Diaz Fernandez , JM , and The tribological behaviour of ZnO nanoparticles as an additive to PAO6 Wear 261 3-4 256 263 2006
- Jaiswal , V. , Rastogi , R.B. , and Kumar , D. The Investigation of Different Particle Size Magnesium-Doped Zinc Oxide (Zn0.92 Mg 0.08 O) Nanoparticles on the Lubrication Behavior of Paraffin Oil Applied Nanoscience 7 6 275 281 2017
- Soares , J.W. , Whitten , J.E. , Oblas , D.W. , and Steeves , D.M. Novel Photoluminescence Properties of Surface-Modified Nanocrystalline Zinc Oxide: Toward a Reactive Scaffold Langmuir 24 2 371 374 2007
- Holman , J.P. and Walter , J. Experimental Methods for Engineers New York McGraw-Hill 2001
- Kline , S.J. Describing Uncertainty in Single Sample Experiments Mech. Engineering 75 3 8 1953