This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Parametric Study of Spring-Back Effects in Deep Drawing by Design of Experiment
Technical Paper
2020-01-0750
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Deep drawing is a sheet metal forming process in which metal blank is radially drawn into a forming die by the mechanical action of the punch. Dimensional tolerances and their variations are important aspects of quality control issues in this forming operation. In this regard, the spring-back effect is an inherent phenomenon that directly affects the final dimensions of the part produced. This research work is focused on analysis and control of spring-back in deep drawing processes. It is mainly focused on design and implementation/simulation of control strategies to minimize that. In this regard, the impact of various process parameters such as lubrication, punch speed, punch and die nose radius, and blank holding force is studied through design of experiment methodology. In particular, this study is focused on the design and development of various control strategies to minimize spring back in this process. An experimental set up is designed and developed to facilitate this research. This paper presents some of the experimental results obtained from this study.
Recommended Content
Citation
Said, R. and Mehrabi, M., "Parametric Study of Spring-Back Effects in Deep Drawing by Design of Experiment," SAE Technical Paper 2020-01-0750, 2020, https://doi.org/10.4271/2020-01-0750.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Ramesh , G. and Reddy , G.C.M. Analysis of Optimization of Blank Holding Force in Deep Drawing by Using LS DYNA International Journal of Engineering Research and Applications
- Wifi , A.S. , Abdelmaguid , T.F. and El-Ghandour , A.I. A Review of the Optimization Techniques Applied to the Deep Drawing Process Proceedings of the 37th International Conference on Computers and Industrial Engineering 2014 1111 1121
- Livatyali , H. and Altan , T. Prediction and Elimination of Springback in Straight Flanging Using Computer Aided Design Methods: Part 1. Experimental Investigations Journal of Materials Processing Technology 117 1-2 262 268 2001
- Meinders , T. , Konter , A. , Meijers , S. , Atzema , E. , and Kappert , H. A Sensitivity Analysis on the Springback Behaviour of the Unconstrained Bending Problem International Journal of Forming Processes 9 3 365 402 2006
- Liu , G. , Lin , Z. , and Bao , Y. Improving Dimensional Accuracy of a U-Shaped Part through an Orthogonal Design Experiment Finite Elements in Analysis and Design 39 107 118 2002
- Khairnar , Y.S. , Deshmukh , D. , Dhembre , K. , Sawant , G. , and Bhosale , A. Review on Optimization of Process Parameter in Square Shaped Components in Deep Drawing Process IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) 30 34 2018
- Gharib , H. , Wifi , A.S. , Younan , M. , and Nassef , A. Optimization of the Blank Holder Force in Cup Drawing Journal of Achievements in Materials and Manufacturing Engineering 18 1-2 291 294 2006
- Wifi , A. and Mosallam , A. Some Aspects of Blank-Holder Force Schemes in Deep Drawing Process Journal of Achievements in Materials and Manufacturing Engineering 24 1 315 323 2007
- Reddy , A.C. Parametric Significance of Warm Drawing Process for 2024T4 Aluminum Alloy through FEA International Journal of Science and Research 4 4 2345 2351 2015
- Reddy , A.C. Formability of Superplastic Deep Drawing Process with Moving Blank Holder Force AA1050-H18 Conical Cups International Journal of Research in Engineering and Technology 04 08 124 132 2015
- Reddy , R.V. , Reddy , T.J. , and Reddy , G. Effect of Various Parameters on the Wrinkling in Deep Drawing Cylindrical Cups International Journal of Engineering Trends and Technology 3 1 53 58 2012
- Păunoiu , V. and Nicoară , D. Simulation of Friction Phenomenon in Deep Drawing Process National Tribology Conference 407 412 2013
- Karupannasamy D. , Hol J. , de Rooij M. , Meinders T. and Schipper D. Modelling Mixed Lubrication for Deep Drawing Processes Wear 294 295 296 304 2012
- Abedrabbo , N. and Zampaloni , M. Wrinkling Control in Aluminum Sheet Hydroforming International Journal of Mechanical Science 47 333 358 2005
- Westeneng , A. 2001
- Padmanabhana , R. , Oliveiraa , M. , and Alvesb , J. Influence of Process Parameters on the Deep Drawing of Stainless Steel Finite Elements in Analysis and Design 43 1062 1067 2007
- Colgan , M. and Monaghan , J. Deep Drawing Process: Analysis and Experiment Journal of Materials Processing Technology 132 1-3 35 41 2003
- Padmanabhana , R. , Oliveiraa , M. , and Alvesb , J. Influence of Process Parameters on the Deep Drawing of Stainless Steel Finite Elements in Analysis and Design 43 1062 1067 2007
- Boher , C. , Attaf , D. , Penazzi , L. , and Levaillant , C. Wear Behaviour on the Radius Portion of a Die in Deep-Drawing: Identification, Localization and Evolution of the Surface Damage Wear 259 7-12 1097 1108 2005
- Gowtham , K. , Srikanth , K.N. , and Murt , K. Simulation of the Effect of Die Radius on Deep Drawing Processes International Journal of Applied Research in Mechanical Engineering 2 1 12 17 2012
- Huang , Y.-M. and Chen , J.-W. Influence of the Die Arc on Formability in Cylindrical Cup-Drawing Journal of Material Processing Technology 55 3-4 360 369 1995
- Reddy , A.C. Homogenization and Parametric Consequence of Warm Deep Drawing Process for 1050A Aluminum Alloy: Validation through FEA International Journal of Science and Research 4 4 2034 2042 2015
- Reddy , R.V. , Reddy , T.J. , and Reddy , G. Effect of Various Parameters on the Wrinkling in Deep Drawing Cylindrical Cups International Journal of Engineering Trends and Technology 3 1 53 58 2012
- Singh , C. and Agnihotri , G. Study of Deep Drawing Process Parameters: A Review International Journal of Scientific and Research Publications 5 2 1 14 2015
- Eshel , G. , Barash , M. , and Johnson , W. Rule Based Modeling for Planning Axisymmetrical Deep Drawing Journal of Mechanical and Working Technology 14 1 1 115, 1986 1986
- Dejmal , I. , Tirosh , J. , Shirizly , A. , and Rubinsky , L. On the Optimal Die Curvature in Deep Drawing Processes International Journal of Mechanical Sciences 44 1245 1258 2002
- Hazek , V. and Lange , K. Use of Slip Line Field Method in Deep Drawing of Large Irregular Shaped Components Seventh NAMRC 1979
- Chen , X. and Sowerby , R. The Development of Ideal Blank Shapes by the Method of Plane Stress Characteristics Int. J. Mech. Sci 159 166 1992
- Sowerby , R. , Duncan , J. , and Chu , E. The Modeling of Sheet Metal Stamping Int. J. Mech. Sci. 28 415 430 1986
- Hammami , W. , Padmanabhan , R. , Oliveira , M.C. , Bel Hadj Salah , H. et al. A Deformation Based Blank Design Method for Formed Parts International Journal of Mechanics and Materials in Design 5 303 314 2009
- Baptistaa , A. , Alvesb , J. , Rodriguesa , D. , and Menezes , L. Trimming of 3D Solid Finite Element Meshes Using Parametric Surfaces: Application to Sheet Metal Forming Finite Elements in Analysis and Design 42 1053 1060 2006
- Kim , J.-Y. , KimMan , N. , and Huh , M.-S. Optimum Blank Design of an Automobile Sub-Frame Journal of Materials Processing Technology 101 1 31 43 2000
- Kuwabara , T. and SI , W.h. PC-Based Blank Design System for Deep-Drawing Irregularly Shaped Prismatic Shells with Arbitrarily Shaped Flange Journal of Materials Processing Teleology 63 89 94 1997
- Reddy , R.V. , Reddy , T.A.J. , and Reddy , G. Optimization of Blank Holder Force to Control Wrinkling and Fracture of Cylindrical Cups in Deep Drawing International Journal of Engineering Trends and Technology 3 5 669 676 2012
- Darmawan , A.S. , Anggono , A.D. , and Hamid , A. Die Design Optimization on Sheet Metal Forming with Considering the Phenomenon of Springback to Improve Product Quality MATEC Web of Conferences 154 1 4 2018
- Rao , B. , Reddy , P.R. , Reddy , G.C.M. , and Rao , G.K.M. Optimization of Blank Holding Force in Deep Drawing of Cylindrical Cups Using Taguchi Approach International Journal of Engineering and Innovative Technology (IJEIT) 2 3 143 148 2012
- Khairnar , Y.S. , Deshmukh , D. , Dhembre , K. , Sawant , G. , and Bhosale , A. Review on Optimization of Process Parameter in Square Shaped Components in Deep Drawing Process IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) 30 34 2018
- Gharib , H. , Wifi , A.S. , Younan , M. , and Nassef , A. Optimization of the Blank Holder Force in Cup Drawing Journal of Achievements in Materials and Manufacturing Engineering 18 1-2 291 294 2006