This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design and Simulation of a Multi Fuel Gas Mixture System of a Wankel Rotary Engine
Technical Paper
2020-01-0548
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The paper first includes the main objective and boundary conditions for design and simulation of a multi fuel gas mixture system of a Wankel rotary engine. New regenerative fuels are more and more important for use in automotive propulsion and stationary applications of combustion engines. Due to the special design and operation of rotary engines there are opportunities for running these engines in future electric and hybrid applications with new designed liquids and gaseous fuels based on regenerative energy sources. Nevertheless, rotary engines have advantages in avoidance of preignition and detonation especially when using gaseous fuels with a higher percentage of hydrogen. The focus is on basic research and analyses of main physical and thermodynamic properties of separate lean burn gases (lower calorific value, mixed calorific value, AFR) and their effects on fuel mixing and engine performance. Furthermore, the scope of the investigation is on the development of simulation models, which are capable to simulate the entire engine process and to map all factors influencing mixture formation, and for the combustion important parameter of unconventional gaseous fuels. Moreover, the authors compare analytical methods and modeling of the power estimation and fuel mixing with 1d simulations of the fuel mixing and rotary engine thermodynamic performance. Analytical models and calculations estimate the effective power and the dimensioning of the mixture formation system. Later on there is a special focus on the modelling of a rotary engine with a commercial reciprocating engine simulation tool that needs significant modifications for calculation of rotary engines. For this work, the authors created a new substitute cylinder model for running the special rotary engine thermodynamic process. The simulation contains the optimization of port timing combined with the intake and exhaust pipes. Finally, the mixture formation system has been coupled with the engine process. The results of the simulations and the analytical methods show the effects of separate design and thermodynamic parameters in combination with regenerative gaseous fuel on the volumetric efficiency, residual gas fraction and scavenging fraction. The work makes a fundamental contribution to the use of novel fuels in conjunction with specially designed internal combustion engines.
Authors
Topic
Citation
Dost, T. and Getzlaff, J., "Design and Simulation of a Multi Fuel Gas Mixture System of a Wankel Rotary Engine," SAE Technical Paper 2020-01-0548, 2020, https://doi.org/10.4271/2020-01-0548.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 |
Also In
References
- van Basshuysen , R. Ottomotor mit Direkteinspritzung und Direkteinblasung Bad Wimpfen Springer 2017
- Backhaus , C. and Werneke , H. 2003
- Zapf , G. 2018
- FEV 2013
- Hellfritzsch , S. and Koppe , K. 2007
- Al-Halbouni , A. , Giese , A. , Görner , K. , Schmitz , I. et al. Flexibles Feuerungssystem zur Verbrennung von Schwachgasen in Mikrogasturbinen-Brennkammern Bochum VDI-Berichte 2009
- Herdin , G.
- Nakagawa , K. , Sakurai , T. , and Shoji , F. Study of Lean Burn Gas Engines Using Pilot Fuel for Ignition Source SAE Technical Paper 982480 1998 https://doi.org/10.4271/982480
- Manivannan , A. , Porai , P. , Chandrasekara , S. , and Ramprabhu , R. Lean Burn Natural Gas Spark Ignition Engine - An Overview SAE Technical Paper 2003-01-0638 2003 https://doi.org/10.4271/2003-01-0638
- Zipser , L. 2000
- Sakurai , T. , Iko , M. , Okamoto , K. , and Shoji , F. Basic Research on Combustion Chambers for Lean Burn Gas Engines SAE Technical Paper 932710 1993 https://doi.org/10.4271/932710
- Nakagawa , K. , Okamoto , K. , and Shoji , F. Development of an Air/Fuel Ratio Control System for Lean Burn Gas Engines SAE Technical Paper 942041 1994 https://doi.org/10.4271/942041
- Clark , N. , Mott , G.E. , Atkinson , C.M. , deJong , R.J. et al. Effect of Fuel Composition on the Operation of a Lean Burn Natural Gas Engine SAE Technical Paper 952560 1995 https://doi.org/10.4271/952560
- Einewall , P. , Tunestål , P. , and Johansson , B. Lean Burn Natural Gas Operation vs. Stoichiometric Operation with EGR and a Three Way Catalyst SAE Technical Paper 2005-01-0250 2005 https://doi.org/10.4271/2005-01-0250
- Sarveswaran , V. , Murthy , Y. , and Ganesan , V. Altitude Performance Comparison of A Wankel Engine With Carburetor and Fuel Injection First National Conference on Automotive Infotronics, Aeronautical Development Establishment Bangalore, India 2003
- Peng , L.X. and Round , G.F. Development of a Unique Fuel Flexible Engine Part I. Engine Design and Physical Model International Congress & Exposition 1995
- Tanamura , M. , Nakai , S. , Nakatsuka , M. , Taki , S. et al. A Fundamental Study on Combustion Characteristics in a Pre-Chamber Type Lean Burn Natural Gas Engine 14th International Conference on Engines & Vehicles 2019
- Bauer , L. 2017
- Tartakovsky , L. , Baibikov , V. , Gutman , M. , Veinblat , M. et al. Simulation of Wankel Engine Performance Using Commercial Software for Piston Engines SAE Technical Paper 2012-32-0098 2012 https://doi.org/10.4271/2012-32-0098
- Norman , T.J. 1981
- Handschuh , R.F. and Owen , A.K. 2010
- Wendeker , M. , Grabowski , Ł. , Pietrykowski , K. , and Magryta , P. 2011
- Huffman , B.C. 2011
- Drogosz , P. 2011
- Poojitganont , T. , Izweik , H.T. , and Berg , H.P. 2006
- Jeng , D.-Z. , Hsieh , M.-J. , Lee , C.-C. , and Han , Y. The Numerical Investigation on the Performance of Rotary Engine with Leakage, Different Fuels and Recess Sizes JSAE/SAE 2013 Small Engine Technology Conference 2013
- Guarato , A.Z. , Ticona , E.M. , and Braga , S.L. Development of a Flex-Fuel Rotary Rngine with Variable Compression Ratio SAE Technical Paper 2016-36-0218 2016 https://doi.org/10.4271/2016-36-0218
- Wankel SuperTec GmbH 2019
- Cerbe , G. Grundlagen Gastechnik München, Wien Carl Hanser Verlag 2008
- Zacharias , F. Grundlagen Gastechnik Würzburg Vogel Buchverlag 2001
- DIN EN 589 2012
- Barth , M. , Arnold , K. , Brauers , T. , and Daniel , D. 2005